Zipcode Design W003228299 Specifications

LED

FLUSH MOUNT

QUESTIONS OR CONCERNS CONTACT CANARM AT:

1-800-267-4427 (English) / 1-800-567-2513 (French)

Monday through Friday 8:00 AM to 5:00 PM E.S.T.

LFM112A

05/16

TOOLS AND MATERIALS REQUIRED:

Phillips

Screwdriver

Pliers Wrench

Wire Cutters

Wiring supplies

as required by
local electrical

!

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.

3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.

4. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A

CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION:

3. Connect the ground wire (bare

Diffuser

Metal

Ring

Bracket

Cap Nut

1. Unscrew the 3 cap nuts

as shown to remove the
brackets, metal ring and
diffuser.

House supply
Ground wire

Fixture

Ground wire

Black

White

copper or green) from your fixture to
the ground wire (bare copper or
green) or ground screw in the
electrical box. Connect the black wire
(or wire with marking) from the fixture
to the black wire in the electrical box
and connect the white wire from the
fixture to the white wire in the
electrical box.

NOTE: Do not disconnect any
pre-wired connections.

4. Once wire connections are

completed, carefully tuck wires and

2. Secure the mounting

screws (only screwing on
halfway) to electrical box.

wire nuts into the outlet box making
sure no bare wire (on the black and
white) is visible at the wire nuts.

code

5. Attach the fixture to the

mounting screws, turn fixture
clockwise, and tighten screws.

Mounting screws

6. Reverse the process of step #1 to

install the fixture.

Mounting screws

Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]