Page 1
This guide
describes
how to install,
program and
operate Zipato
home control
system.
How can I
control my
complete home
with one
easy, intuitive
and effi cient
solution?
USER
GUIDE
v1.0
HOME
TABLET 7”
CONNECT EVERYTHING
Page 2
COPYRIGHT
© 2012 Tri plus grupa d.o.o. All Rights Reserved. Copyright by Tri plus grupa d.o.o.
No part of this manual may be reproduced or transmitted in any form without the
expressed, written permission of Tri plus grupa d.o.o.
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks.
All other product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
NOTICE
Although Zipato has attempted to ensure the accuracy of the content of this manual,
it is possible that this document may contain technical inaccuracies, typographical,
or other errors. Zipato assumes no liability for any error in this publication, and
for damages, whether direct, indirect, incidental, and consequential or otherwise,
that may result from such error, including, but not limited to loss of data or profits.
Zipato provides this publication “as is” without warranty of any kind, either express
or implied, including, but not limited to implied warranties of merchantability or
fitness for a particular purpose. The published information in the manual is subject
to change without notice.
Zipato reserves the right to make changes in the product design, layout, and driver
revisions without notification to its users.
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 3
IMPORTANT SAFETY INFORMATION
To avoid contact with electrical current:
Never install an Ethernet connection in wet locations unless that connector is
specifically designed for wet locations.
Do not place Ethernet wiring or connections in any conduit, outlet or junction box
containing electrical wiring.
Installation of inside wire may bring you close to electrical wire, conduit, terminals
and other electrical facilities. Extreme caution must be used to avoid electrical
shock from such facilities. Avoid contact with all such facilities.
Ethernet wiring must be at least 2 m from bare power wiring or lightning rods and
associated wires, and at least 15 cm from other wire (antenna wires, doorbell
wires, wires from transformers to neon signs), steam or hot water pipes, and
heating ducts.
ELECTROMAGNETIC COMPATIBILITY
In proper state and when operated properly, the product complies with all the
requirements in respect of interference radiation according to EN 301 489-17, EN
301 489-1 and EN 300 328. The connections conducting HF signals must neither be
manipulated nor damaged.
03
ZIPATO WALL TABLET
USER GUIDE v1.002
www.zipato.comwww.zipato.com
Page 4
INTRODUCTION 05
PACKAGE CONTENTS 12
WALL MOUNTING HOME TABLET 13
INSTALLING HOME TABLET 15
ACCOUNT CREATION AND REGISTRATION 16
ADDING DEVICES 19
REMOVING DEVICES 19
SPECIFICATIONS 20
LIMITED PRODUCT WARRANT Y 22
DECLARATION OF CONFORMITY 27
DISPOSING AND RECYCLING YOUR PRODUCT 30
CONTENTS
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 5
THANK YOU for purchasing Zipato Home Tablet. This guide describes how to
install, program and operate your Home Tablet. Zipato Home Tablet makes YOUR
home smart by using advanced technology to hide the complexity of home networking
- delivering a simple smart home. It can be placed on any wall in the home and
automatically talks to all the connected devices in the house, connecting them to the
cloud so that consumers can control them using tablets, smart phones, computers
or TVs— at home or on the go. Zipato Gateway supports a variety of communication
standards including Z-WAVE, ZIGBEE, KNX, ONVIF, and UPnP.
Zipato Home Tablet capabilities can easily be expanded thru use with Zipabox Smart
home controller and its “snap-in” expansion modules that will add support for new
interfaces and functionalities, communication standards and protocols, etc.
Once configured, it works stand-alone, but also features cloud support for advanced
monitoring, messaging and programming services.
Intuitive graphical user interface allows customers to program their own home
rules without any previous programming experience.
INTRODUCTION
05
ZIPATO WALL TABLET
USER GUIDE v1.004
www.zipato.comwww.zipato.com
Page 6
SECURITY
AND SAFETY
01
unlimited number of virtual alarms (partitions)
up to 233 two-way, wireless zones
trigger alarms in case of:
intruder (motion sensors and door/window sensors),
fire (smoke sensors),
flood (water leakage sensors),
gas (CO sensors)
panic button,
duress (if someone force you to disarm your system)
health care (in case of missing actions during particular time e.g. motion, door
opening, laying on bed...)
remote arm/disarm and status-info with any smartphone
vandal proof - Zipabox is 24/7 monitored by central station which triggers alarm
in case of connection loss
include arm/disarm commands in automation scenes
integration with existing alarm systems (DSC, Honeywell...)
easy online setup and configuration through web based interface
use of same sensors for security and automation purposes
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 7
LIGHTING
02
easy installation of wireless modules
Z-Wave and ZigBee lighting modules pre-configured for even easier setup
support remote dimming and on/off switching with any smartphone
automatically turn lights on at sunset and off at sunrise
unlimited number of scenes supported
turn lights on during emergencies
advanced event based rules configuration
auto-pilot lighting programs to discourage intruders while home is empty
CLIMATE
03
multi-room heating and cooling control with any smartphone
advanced programming scheduler online, accessible over web browser
easily create unlimited number of custom zones (thermostats)
multi-zone humidity control by using standard humidifiers and dehumidifiers
use Internet weather feeds to program your home climate conditions
create advanced event based rules to automate home climate based on other
07
ZIPATO WALL TABLET
USER GUIDE v1.006
www.zipato.comwww.zipato.com
Page 8
environmental and home events
include climate control in automation scenes together with alarm, lighting, etc.
Notification and automated actions in case of overtemperature events, power
outages, and other incidents…
SUN
SHADING
04
control blinds, roller-shutters, curtains and pergolas using any smartphone
automate motors by using fun and easy programming
add your sun shading commands into home scenarios together with lights,
climate, alarms...
automate your shades to react to outside weather conditions
easy installation using pre-configured wireless modules
IRRIGATION
05
control unlimited number of irrigation zones
use advanced programming options online to setup perfect irrigation process
automate irrigation system based on Internet weather forecast
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 9
integrate your irrigation scheme together with your complete home automation
scenarios
ACCESS
06
remotely lock/unlock your door with any smartphone
remotely open/close your garage door or gate over any smartphone
get video notification when door is open
use RFID tags to open doors and get detailed statistics
automate doors/locks using scenarios and event based programming tool
trigger automation events when door lock user codes are entered
automatically unlock doors in the event of an emergency
MULTIMEDIA
07
remotely control your audio/video equipment with any smartphone
automatically turn on favorite shows when they air and get alerts
automatically turn off A/V equipment at pre-set time or when room is unoccupied
automatically turn on equipment to discourage intruders
09
ZIPATO WALL TABLET
USER GUIDE v1.008
www.zipato.comwww.zipato.com
Page 10
VIDEO
MONITORING
08
access live and recorded video via the web and from any smartphone
support for most of the available IP cameras – ONVIF support
get email and SMS notifications with pictures and live video attached
remotely adjust pan-tilt cameras
create advanced event based recording and video notification rules
ENERGY
METERING
09
real-time monitoring energy consumption and notification right on smartphone
compare energy usage and cost with others in the area
automatically turn on/off your appliances in accordance with electricity prices
see detailed analysis of your energy consumption
save energy by automating lights, thermostats, sun shades...
TAKE CARE OF YOUR SAFETY
Display extreme caution when using ladders or steps, please follow manufacturer’s
instructions. Be careful when using hand and power tool s and follow the manufacturer’s
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 11
guidelines when using them. Take care that the correct tools are used. Wear goggles or
protective clothing where required.
TECHNICAL
SUPPORT
08
HAVING TROUBLE INSTALLING YOUR NEW PRODUCT?
Zipato’s website contains the latest user documentation and software updates for
Zipato products and services.
www.zipato.com
CALL SUPPORT
CONTACT LINE: +385 1 4004 404
(Mon-Fri) 9.00am-06.00pm
11
ZIPATO WALL TABLET
USER GUIDE v1.010
www.zipato.comwww.zipato.com
Page 12
PACKAGE CONTENTS
ZIPATO
HOME TABLET 7”
ZIPATO
WALL HOLDER
WALL HOLDER
INSTALLATION GUIDE
USB CABLE
ADAPTER
USER MANUAL
COLORBOX
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 13
MOUNTING TABLET HOLDER
Using Zipato wall holder will allow you to fix Zipato home tablet to any wall in your
home without having any visible charger wires after you finish the installation. No
matter you will dedicate one spot for your Zipato home tablet, by using flexible Zipato
wall holder, you can easily detach tablet for some other usage and attach it again
after usage. Besides converting your Zipato home tablet in a real home control panel,
Zipato wall holder has a radio module inside which allows Zipato home tablet to
become a powerful home automation controller even without using Zipabox home
automation controller in addition.
01
Installation with junction box
WALL MOUNTING
HOME TABLET
02
Installation without junction box
13
ZIPATO WALL TABLET
USER GUIDE v1.012
www.zipato.comwww.zipato.com
Page 14
WALL HOLDER
FRONT
WALL HOLDER
PROFILE
WALL HOLDER
BACK
WALL HOLDER OVERVIEW
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 15
INSTALLING HOME TABLET ONTO THE WALL HOLDER
01 02
03
15
ZIPATO WALL TABLET
USER GUIDE v1.014
www.zipato.comwww.zipato.com
Page 16
ACCOUNT CREATION
To benefit from the Zipato monitoring and control service you will need to set up
your Zipato account and register your Home Tablet. Upon registration you will
automatically get the basic free level of monitoring service.
Open a browser window on your computer and go to the following URL: my.zipato.com
Click on “Register” button in upper right corner of a screen and follow the onscreen
instructions. Next window will pop up.
Fill out empty fields
Click on “Register”
Take note of your password
during this process.
ACCOUNT CREATION
AND REGISTRATION
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 17
Once you input registration data and click on register, new window will pop up:
REGISTER YOUR HOME TABLET
When you first time log in to your account, you need to enter serial number of your
Home Tablet. For that, simply download our app “Zipato Client” from the App Store.
When this message appears check your email account. If there is no email please
check spam container.
Email should look like this:
Hi, your email here“, welcome to the Zipabox!
To validate your email address please click on the following link verify Once email is
verified, login to Zipato by filing out credentials.
17
ZIPATO WALL TABLET
USER GUIDE v1.016
www.zipato.comwww.zipato.com
Page 18
Enter the serial number shown on the “Zipato Client” app.
Serial number must be entered within 2 min. If not, message will appear saying
“Allowed registration time elapsed”. This is done because security precaution. If
this happens restart Home Tablet and reenter serial number.
FINALIZE YOUR ACCOUNT
Your account is set up and you are able to use Zipato cloud system. Anyway, you
need to ensure that your account is fully set up so you get the most from your Zipato
account. THIS INCLUDES: Account Details
Make sure that you have fully completed your profile. Go to General settings in the
General widget and select Details tab.
USERS
The Users section is where you add your family members which will have the rights
to use your system. Adding a new user requires you to enter new user’s details and to
give him/her certain rights. Rights management allows you to permit some services
for some users.
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 19
ADDING NEW DEVICES Z-WAVE OR ZIGBEE
Before adding new device, it is recommended to bring device closer to Zipabox, so
that no obstacle can interfere with operating range of device. Recommended distance
between sensors and Zipabox is less than one meter. Read device instructions
regarding inclusion/join mode. Device in inclusion/join mode is awake and ready
for joining in to Zipato network. Always reset device before adding it to the network.
Reset deletes any information about prior controller that was stored in device. At the
end of joining or removing session it is recommended to refresh Zipato Control Center
or wait until number of device is not increased by one to make sure that device is
visible in Total device list.
01 | On Zipato dashboard, click “Add device” button in General widget and follow
wizard instructions. For Zwave devices, it is recommended that you reset your
device before adding it to the Zipato network.
02 | After you successfully add the device in to your Zipato network go to “Total
devices” in General widget and set your device’s room name and type. This will help
you to control your device easier.
REMOVING DEVICES
To remove device go to Zipato Control Center and click on “Remove device” and
follow wizard instructions.
ADDING DEVICES
19
ZIPATO WALL TABLET
USER GUIDE v1.018
www.zipato.comwww.zipato.com
Page 20
CPU
Dual core, 1.2 GHz
SCREEN
7inch Capacitive
(resolution 800x480)
Multi-touch
SYSTEM
Android 4.2
CAMERA
Front 0.3M
RAM
DDR3 512MB ROM4GB Flash
WIFI
802.11b/g/n
3G SUPPORT
external 3G dongle
G-SENSOR
Yes
I/O PORTS
1*TF card slot
1*3.5MM earphone jack
1*DC 5V/2A / 1*mini USB OTG
(PC, 3G, U disk, mouse, keyboard)
BATTERY
2200 mAh / 3.7V
Lithium Polymer battery
VIDEO
Support 720P/1080P/2160P HD video
playing & output
SPECIFICATIONS
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 21
APPLICATIONS
E-book
google market
email
facebook
youtube
3D games
ACCESSORIES
Standard Adapter
USB cable
user manual
colorbox
facebook
youtube
3D games
21
ZIPATO WALL TABLET
USER GUIDE v1.020
www.zipato.comwww.zipato.com
Page 22
GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutor y rights as a consumer.
The Limited Product Warranty set forth below is given by Tri plus grupa d.o.o.
(Europe) (herein referred to as “ZIPATO”). This Limited Product Warranty is only
effective upon presentation of the proof of purchase. Upon further request by
ZIPATO, this warranty card has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ZIPATO MAKES
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE
LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY
STATEMENT ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES AGAINST
ZIPATO. THEY DO NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU
HAVE AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM. IN NO
EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL,
LIMITED PRODUCT
WARRANTY
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 23
INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER
DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
HOWEVER, NOTHING IN THIS AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU
(I) IN THE EVENT OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART OF ZIPATO, OR (III)
TO THE EXTENT ARISING UNDER PART 1 OF THE CONSUMER PROTECTION ACT
1987 OF THE UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW:
(1) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR
FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE
OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware products
(collectively referred to as “ZIPATO Hardware Products”) sold by ZIPATO (Europe),
its European subsidiaries, affiliates, authorized resellers, or country distributors
(collectively referred to as “ZIPATO Resellers”) with this Limited Product Warranty.
The term “ZIPATO Hardware Product” is limited to the hardware components and all
its internal components including firmware. The term “ZIPATO Hardware Product”
DOES NOT include any software applications or programs.
23
ZIPATO WALL TABLET
USER GUIDE v1.022
www.zipato.comwww.zipato.com
Page 24
GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products sold by Zipato
Resellers in all countries listed at the beginning of this document under the heading
“Countries in which this ZIPATO Limited Product Warranty applies”. The Limited
Product Warranty will be honored in any country where ZIPATO or its authorized service
providers offer warranty service subject to the terms and conditions set forth in this
Limited Product Warranty. However, warranty service availability and response times
may vary from country to country and may also be subject to registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under normal use are free from
material defects in materials and workmanship during the Limited Product Warranty
Period set forth below (“Limited Product Warranty Period”), if the product is used
and serviced in accordance with the user manual and other documentation provided
to the purchaser at the time of purchase (or as amended from time to time). ZIPATO
does not warrant that the products will operate uninterrupted or error-free or that all
deficiencies, errors, defects or non-conformities will be corrected. This warranty shall
not apply to problems resulting from: (a) unauthorized alterations or attachments; (b)
negligence, abuse or misuse, including failure to operate the product in accordance
with specifications or interface requirements; (c) improper handling; (d) failure of
goods or services not obtained from ZIPATO or not subject to a then-effective ZIPATO
warranty or maintenance agreement; (e) improper use or storage; or (f) fire, water, acts
of God or other catastrophic events. This warranty shall also not apply to any particular
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 25
product if any ZIPATO serial number has been removed or defaced in any way. ZIPATO
IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR FAILURE
TO FOLLOW THE INSTRUCTIONS FOR THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of purchase from ZIPATO. Your
dated sales or delivery receipt, showing the date of purchase of the product, is your proof
of the purchase date. You may be required to provide proof of purchase as a condition
of receiving warranty service. You are entitled to warranty service according to the
terms and conditions of this document if a repair to your ZIPATO branded hardware is
required within the Limited Product Warranty Period. [Other than in respect of products
for domestic use (in particular those listed in the first and last boxes in the table below),
this Limited Product Warranty extends only to the original end user purchaser of this
ZIPATO Hardware Product and is not transferable to anyone who obtains ownership of
the ZIPATO Hardware Product from the original end-user purchaser.
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE Zipato Home Tablet 7”
PRODUCT WARRANTY PERIOD One (1) year
IMPORTANT: The content of “Product Type” listed above is subject to change; please
refer to the www.zipato.com for latest update.
25
ZIPATO WALL TABLET
USER GUIDE v1.024
www.zipato.comwww.zipato.com
Page 26
PERFORMANCE OF THE LIMITED PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to repair or replace
any defective Zipato Hardware Product free of charge provided it is returned to an
Authorized ZIPATO Service Centre during the Limited Warranty Period. Such repair
or replacement will be rendered by ZIPATO at an Authorized ZIPATO Service Centre.
All component parts or hardware products that are replaced under this Limited
Product Warranty become the property of ZIPATO. The replacement part or product
takes on the remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make, model or part;
ZIPATO may in its discretion replace the defective product (or any part thereof) with
any reconditioned equivalent (or superior) product in all material respects to the
defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA Telephone +385 (1) 444 444 00
Facsimilie +44(0)208 955 9001
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 27
The Manufacturer Tri plus grupa d.o.o. hereby declares that the product:
Zipabox Smart home controller 1 (zbzweugv1)
In accordance with the following Directive(s): 2006/95/EC The Low Voltage
Directive, 89/336/EEC The Electromagnetic Compatibility Directive and 1999/5/
EC R&TT EC Directive is in conformity with the e applicable requirements of the
following documents:
EN 61326 EN 61000-3-3 EN 61000-4-4 EN 61000-4-11
IEC/EN 55011 EN 61000-6-2 EN 61000-4-5 EN 301 489-1-3
EN 300 220-2 EN 61000-4-2 EN 61000-4-6 AS/NZS/IEC 60335-2-97
EN 61000-3-2 EN 61000-4-3 EN 61000-4-8 EN 60335-1
I hereby declare that the equipment named above has been designed to comply with
the relevant sections of the above referenced specifications. The unit complies with
all applicable Essential Requirements of the Directives.
PERSON RESPONSIBLE FOR THIS DECLARATION:
Dean Janacek, Certification Manager
DECLARATION OF
CONFORMITY
27
ZIPATO WALL TABLET
USER GUIDE v1.026
www.zipato.comwww.zipato.com
Page 28
Changes or modifications not expressly approved Tri plus grupa d.o.o. for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 29
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
29
ZIPATO WALL TABLET
USER GUIDE v1.028
www.zipato.comwww.zipato.com
Page 30
DISPOSING AND RECYCLING YOUR PRODUCT
This symbol on the product or packaging means that according to local laws and
regulations this product should be not be disposed of in the household waste but
sent for recycling. Please take it to a collection point designated by your local
authorities once it has reached the end of its life, some will accept products for free.
By recycling the product and its packaging in this manner you help to conserve the
environment and protect human health. Zipato and the environment At Zipato, we
understand and are committed to reducing any impact our operations and products
may have on the environment. To minimize this impact Zipato designs and builds its
products to be as environmentally friendly as possible, by using recyclable, low toxic
materials in both products and packaging.
ZIPATO WALL TABLET
USER GUIDE v1.0
Page 31
NOTES
31
ZIPATO WALL TABLET
USER GUIDE v1.030
www.zipato.comwww.zipato.com
Page 32
make your home smart
www.zipato.com
Loading...