Zip HT1006 Specifications Sheet

Specification Sheet – Model HT1006
Zip HydroTap® Miniboil® Classic
Miniboil® Classic installed on sink.
Super-compact economy models for
filtered boiling water and filtered ambient water
Touch pad control panel.
Can be installed away from any sink with the optional Zip “font” accessory.
Zip Hydrotap Miniboil now offers you boiling filtered water as well as ambient filtered water- instantly.
• Super-compact, super-simple instant boiling water system for home kitchens.
• Press the blue touch pad for ltered ambient water, instantly. Great tasting freshly ltered water for cool drinks and cooking.
• Permanent safety lock requires two nger operation to access boiling water.
• Temperature status indicator light signals when boiling water is ready to use.
• Filter warning light signals when the water lter cartridge replacement is due.
Super compact under sink unit with external filter system
• Makes it easy to install where sink cupboard space is limited.
• PLUS internal boiling water pump for steady continuous ow.
• Water dispenses at set temperature from the rst drop. No waste.
• PLUS cool-touch tap head and body.
Crystal-clear great-tasting water.
• Filters out chlorine, lead, rust, asbestos bres and volatile organic compounds.
• Removes impurities larger than one ve-thousandth of a millimetre, including the protozoan cysts Cryptosporidium and Giardia. Does not remove uoride.
• Tested and certied by NSF International to NSF/ANSI standards 42 and 53.
Zip Specification Sheet - Z0219 13.01.21
Australian Made
212
46
125
50 min
50 min
200 min
196
A
A
Mains Cold water
isolation valve
240 - 230V, 50Hz
GPO
Clearance Envelope
Pressure limiting valvle
Filter
269
338
65 min.
SECTION A-A
SCALE 1 : 5
Clearance Envelope
4 min.
Buffer Pad
Air Space
80 15
35 Hole
HydroTap®
Miniboil Classic
Tap
Sink shown only
94
154
219
6
92
C
L
Reach
232
297
DETAIL FONT
SCALE 1 : 5
Specification Sheet – Model HT1006
Zip HydroTap® Miniboil® Classic
Super-compact economy models for
filtered boiling water and filtered ambient water
Order Code
HT1006 Miniboil BA Classic Yes Yes 1.8 litres 1.5 kW 212 x 272 x 338
Location
The Zip Miniboil Tap may be installed to ow into a sink, or be installed away from a sink on a Zip Miniboil “font” accessory which is plumbed to waste.
For tap installations a 35 mm hole is required.
Electrical
Plugged to a 10 Amp GPO within 1000 mm. Power supply 220 V to 240 V AC 50/60 Hz. Install in accordance with AS/ NZS 3000 safety regulations.
Clearances
The under sink system must be installed with clearances of 50 mm left and right, 200 mm above and 60 mm rear.
Zip Model
Boiling
Water
Plumbing
Must be installed by a qualied technician in accordance with instructions supplied with the product and with AS/NZS 3500 plumbing regulations.
Water supply must be potable (drinkable), with a minimum pressure of 172 kPa.
The unit comes complete with a pressure limiting valve, an isolation valve (not supplied) must be installed between the water supply and the under sink system.
The under sink system must be located directly beneath the tap. The maximun distance from the tap to the undersink unit is 1000mm. Under sink tubing must be taut with constant ow for proper drainage and never be looped or coiled.
Cold
Water
Boiling Chamber
Total
Rating
Warranty
Twelve months full parts and labour warranty. For full warranty details visit www.zipindustries.com
Accessories
90046 - Tap Font Kit for including tap extension
for Classic models 90026 - 100mm Tap Extension 91290 - Zip 0.2 micron replacement lter
Technical Assistance
Contact Zip Industries (Aust) Pty Ltd 67 Allingham Street, Condell Park NSW 2200.
Free Call 1800 638 633 Telephone 02 9796 3100 Website www.zipindustries.com
As Zip policy is one of continuous product improvement changes to specifications may be made without prior notice.
Under-Sink
W x D x H
Zip Specification Sheet - Z0219 13.01.21
The terms, Zip, HydroTap, Miniboil and Power-Pulse are Trademarks
Loading...