Zip HT1002 User Manual

Specification Sheet - Compact Two
Residential model Compact Two – saving time, money and energy at work
The most popular model for home kitchens.
®
Zip HydroTap
Boiling and Chilled filtered water, instantly.
Simple to install at any kitchen sink.
New Free-Flow™ feature is great for filling a number of personal water bottles at one time as cold filtered water continues to flow even when rated chilled water capacity is exceeded.
Can be installed away from any sink with the optional Zip “font” accessory.
Zip HydroTap offers you boiling and chilled filtered water – instantly.
Simple to operate, and with more safety features than ever.
• Press the red lever and “safety” button together to access boiling water.
• Press the blue lever to ll a glass, jug or bottle with chilled ltered water.
• Lift either lever to run water for any pre-set period of 5 to 15 seconds.
Smarter technology cuts power consumption dramatically.
• Power-Pulse™ controls power phasing precisely to cut power costs.
• Set sleep mode to lower boiling water to 64°C after 2 hours of non-use.
• Set hibernation mode to turn off power totally after 2 hours of non-use.
• Set 24/7 on/off weekly timer to save energy when kitchen is not in use.
• Complies with requirements of Section J6 of Building Code of Australia.
Supplied with 0.2 micron water filtration for crystal-clear great-tasting water.
• Filters out chlorine, lead, rust, asbestos bres and volatile organic compounds.
• Removes impurities larger than one ve-thousandth of a millimetre, including the protozoan cysts Cryptosporidium and Giardia. Does not remove uoride.
• Tested and certied by NSF International to NSF/ANSI standards 42 and 53.
Zip Specification Sheet Z0172 12.12.07
Specification Sheet - Compact Two
Residential model Compact Two – saving time, money and energy at work
®
Zip HydroTap
Boiling and Chilled filtered water, instantly.
Order Code
Zip Model
Boiling
Water
Chilled
Water
Boiling
Chamber
Chilled
Chamber
Total
Rating
Under-Sink
W x D x H
HT1002 Compact 2 Yes Yes 2.0 Litr 1.5 Litres 1.8 kW 385 x 382 x 348
Location
The tap must be positioned so that it drains into a suitable sink, or be installed on the optional “tap font kit”. The tap should be situated as closely as possible to directly above the under-sink control cabinet. The maximum distance from the base of the tap to the control cabinet is one metre. The under-sink control cabinet must have top, side and rear clearances as shown on the drawings.
Plumbing
To be installed in accordance with AS/NZS3500 plumbing regulations. Designed for direct connection to a potable (drinkable) cold water supply with minimum pressure of 172 kPa and is supplied with a pressure limiting valve that must be connected at the
Electrical
To be connected to a 10 amp GPO, 220-240 Volt AC power supply and in accordance with AS/NZS 3350 and 3000 wiring regulations.
Caution
In some hard water areas where mineral scale accumulation can become a problem, consideration should be given to the maintenance required. A suitable form of water treatment may be necessary.
Accessories
90046 - Tap font kit 91290 - Zip 0.2 micron replacement lter 91287 - Zip Aire Ventilation system
Warranty
Thirty six months full parts and labour warranty upon registration of the installation with the Zip Customer Care team. For full warranty details visit www.zipindustries.com
Technical Assistance
Contact Zip Industries (Aust) Pty Ltd 67 Allingham Street, Condell Park NSW 2200.
Free Call 1800 638 633 Telephone 02 9796 3100 Website www.zipindustries.com
As Zip policy is one of continuous product improvement changes to specifications may be made without prior notice.
time of installation. An isolating valve should be xed between the water supply and the operational unit.
35 Hole
HydroTap® Tap
207.8 at rest
348.0 200.0 min.
80 15
46.0
Clearance Envelope
385.0
50.1 min. 50 min.
Sink shown only
125.4
A
A
220 - 240V, 50Hz GPO
Pressure limiting valve (supplied)
Mains Cold water isolation valve
4.0 min. Buffer Pad Air Space
Clearance Envelope
SECTION A-A
SCALE 1 : 5
382.5
231.6
65 min.
91.7
C
Reach
L
314 at rest
7.0 max. hole
94.0
218.5
DETAIL FONT
SCALE 1 : 5
6.0
Zip Specification Sheet Z0172 12.12.07
Loading...