Zip 76121 Installation Instructions

Zip Domestic Chill Tap - Installation & Operating Instructions - 87403 - June 2007 Page 1 of 8

Domestic Installation and Operating Instructions

Zip Domestic Chill Tap

Undersink filtered / unfiltered domestic chilled drinking water

76121 - 60 Glass/Hr Filtered UCCT12FXV

®

Page 2 of 8 Zip Domestic Chill Tap - Installation & Operating Instructions - 87403 - June 2007

# Section Heading

Zip Domestic Chill Tap - Installation & Operating Instructions - 87403 - June 2007 Page 3 of 8

# Read These Warnings First

Installing the Chiller

Sit the chiller unit into the cupboard as close to the proposed outlet tap position
as is possible, to minimise the length of tubing exposed between the chiller
unit and the outlet tap.

Allow at least 50 mm around the chiller unit to permit free airflow. Both the
top and the front of the chiller must remain accessible for servicing purposes.

Installing the Tap

If this model comes with a carafe filler, position and install the carafe filler at
the back of the sink where there is a 45 mm wide flat area within the draining
area of the sink.

Make sure the selected position allows the carafe filler spout to overhang the
sink bowl.

# Domestic Installation Instructions

Please read all installation requirements, installation procedures and
precautions before installing any Zip Chill Tap.

Never attempt to install any Zip Chill Tap without reading all of the applicable
instructions.

All electrical connections must comply with current wiring rules.

This appliance is not designed for use by young children or infirm people
without supervision.

Young children should be prevented from having access to ensure they are not
able to use or play with the chiller.

This appliance must be earthed.

If the power supply cord is damaged it must be replaced by a Zip Service
Provider or a qualified electrician.

Do not remove the cover of the appliance under any circumstances without
first isolating the appliance from the power supply.

RED tube into chiller

BLUE tube
from chiller

CLEAR tube
into carafe

Flow