Zigen ZIG-POC-100 Users Guide

ZIG-POC-100

HDBaseT HDMI Extender

1

Important Safety Instructions

1. Do not use this product near water.

2. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

3. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.

4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

5. Only use attachments/accessories specified by the manufacturer.

6. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.

7. Unplug this apparatus during lightning storms or when unused for long periods of
time.

8. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

9. Batteries that may be included with this product and/or accessories should never be
exposed to open flame or excessive heat. Always dispose of used batteries
according to the instructions.

2

Warranty Information

Powered Product Warranty

Zigen warrants its powered products against any defects in materials and
workmanship for a period of three years from the date of invoice. Touchscreen
displays
carry a one year parts and labor warranty. If a malfunction occurs during the warranty
period, Zigen will repair or replace a product to its original operating condition. A
return authorization number must be obtained from Zigen before products are
returned for service.

Non-Powered and Cable Products - Lifetime Limited Performance Warranty

Zigen warrants that its non-powered products and cable products will be free from
defects in material and workmanship for as long as you or your customer owns the
product. All Zigen non-powered products and cables are designed and engineered to
meet and exceed performance specifications. If, at anytime, the product fails due to
manufacturer defect, Zigen will repair or replace the product to ensure that it meets
original performance specifications. Reduced performance due to normal wear and
tear, or damages caused by misuse or negligence will not be covered. Zigen will test
and evaluate all non-powered and cable products claimed defective. Products must
be shipped to Zigen, prepaid along with proof of purchase only after obtaining a
Return Merchandise Authorization (RMA) number from Zigen. This statement of
policy is in lieu of any other policy expressed or implied and no representative or
person is authorized to assume any other liability or adopt any other policy for Zigen
without our written consent.

Return Policy

If you would like to return a Zigen product, it can be done within 30 days of purchase
for a full refund, less shipping and handling. Zigen will not be responsible for shipping
and handling of product returns. Returns will only be accepted of products with proof
of purchase, products in the original packaging with zero to minimal use and a Return
Merchandise Authorization RMA number provided by Zigen.

3

Contacting Zigen

Technical Support

Tel: [phone]
Fax: [phone]

8:00AM - 5:00PM (PST)

Email

[e-mail]

Web

www.zigencorp.com

Mailing Address

Zigen Corp.
c/o Customer Service
6934 Canby Avenue
Suite 107
Reseda CA 91335
USA

4

 Supports 4K/UHD/60Hz/4:4:4
 Supports HDMI2.0 & HDCP2.2, and is backward compatible to the

previous version

 Maximum transmission distance is up to 70m for 4Kx2K, and 100m for

1080p

 Supports CEC, IR and RS-232 pass-through for long-distance control
 Supports bi-directional POC for simplified wiring
 Supports HDR-10

Features

5

Function

HDMI

Connector

HDMI A-Type Female x 1

RJ-45

Connector

RJ-45 Jack x 1

RS232

Connector

DB9 Female x 1

IR IN

3.5ψ Stereo Jack x 1

IR OUT

3.5ψ Stereo Jack x 1

LED

LED x 3

DC Jack

12-v

12-v

Max.

Resolution

4K@60Hz / 4:4:4

Cable

Distance

4K/60Hz 70 m (Max.)

1080P/60Hz 100 m

(Max.)

Power

Adapter (Min.)

DC 12-V with lock

Power

consumption

20W (MAX)

Operating

Temperature

0 ~ +50˚C

Storage

Temperature

-10 ~ +50˚C

Relative

Humidity

0% ` 90%

External

Power Supply

Input: 100VAC~240VAC, 50/60Hz; 12­VDC 2A

Enclosure

Aluminum

Weight

Tx

182g

Rx

182g

Dimensions

(LxHxW)

166 x 20 x 84 mm

Specifications

6

Packing List

The ZIG-POC-100 is packaged with the following items:

 1 x Transmitter
 1 x Receiver

 1 x 12V DC Power Adaptor

 1 x IR Receiver
 1 x IR Emitter

 1 x User Manual

If any of these products are not present upon first opening of the package,
please contact Zigen or your reseller.

© 2017 Zigen, Corp. All Rights Reserved.

All trademarks are the property of their respective owners.

Zigen, Corp. reserves the right to make changes in the hardware, packaging

and any accompanying documentation without prior written notice.

7

Table of Contents

Introduction

Introduction ……………………..…………….…………………… 9

Transmitter Front Panel ............................................................ 10

Transmitter Back Panel ............................................................. 11

Receiver Front Panel ................................................................. 12

Receiver Back Panel ................................................................. 13

Get Started

Installation …………………………………………………………… 14
System Diagram ……………………………………………..…….. 15

Connection

IR Receiver Cable Directions ..................................................... 16

HDMI Connector Signal Pin Out ................................................. 17

RJ-45 Wiring Information & Coding ........................................... 18

One-to-One System Connection Example ................................. 19

8

Introduction

The ZIG-POC-100 is an ultra-thin HDMI2.0 Extender consist of transmitter and
receiver. It extends 1080p/4K HDMI signal over CAT-6a cable up to 100m /70m
(PoC), and enables IR and RS-232 pass-through to control source or display
device remotely. This extender is equipped with visually lossless video
compression technology (VLC) to ensure HD lossless transmission of HDR-10
and 4K@60Hz/4:4:4 over CAT-6a cable.

Introduction

9

Transmitter Front Panel

1 POWER - blue LED light
2 LINK - blue LED light
3 HDCP - blue LED light

Introduction

10

1 12-V DC

Support bi-directional PoC.

2 HDBT

Connect using a CAT-6a cable.

3 IR OUT

Connect IR Emitter to send IR signal to source device.

4 IR INa

Connect to 3rd party control processor IR out to control
display device.

5 RS-232

Connect an RS-232 cable from this port to an RS-232
device.

6 HDMI IN

Connect to HDMI source.

Transmitter Back Panel

Introduction

11

Receiver Front

1 POWER - blue LED light
2 LINK - blue LED light
3 HDCP - blue LED light

Introduction

12

Receiver Back Panel

1 12V DC

Support bi-directional POC.

2 HDBT

Connect using a CAT-6a cable.

3 IR OUT

Connect IR Emitter to send IR signal to TV / Display.

4 IR IN

Uset provided IR receiver to control remote source devices.

5 RS-232

Connect an RS-232 cable from this port to an RS-232 device.

6 HDMI OUT

Connect to HDTV Display.

Introduction

13

Installation

1. Be sure to turn OFF source and TV.

2. Connect the HDMI extension cable between HD Source and HDMI In
port of the Transmitter.

3. Connect the HDMI extension cable between the HDTV and the HDMI
Out port of the Receiver.

4. Connect Cat-6a cable between the Transmitter Link port and the
Receiver Link port of the Receiver.

5. Connect the Power adapter to the Receiver or Transmitter and power
up the extender

6. Turn on the HD source and HDTV.

Get Started

14

System Diagram

Get Started

15

IR Receiver Cable Directions

Plug the IR receiver into the ZIG-POC-100-Tx “IR IN” port and place the IR
receiver so you can point to it easily with your IR remote controller.

The IR receiver is designed to work on the “Rx” receive side of the extender.

The IR input on the “Tx” transmitter side is designed to receive commands

directly from control processor and is not intended to be used in conjunction
with IR receiver.

IR Emitter Directions:
Plug any third party IR emitter into the ZIG-POC-100-Tx “IR OUT” port and

place the IR sensor directly on the IR window on the front panel of the device
you intend to control.

Connection

16

Pin

Signal

Pin

Signal

1

TMDS Data 2+

11

TMDS Clock Shield

2

TMDS Data 2 Shield

12

TMDS Clock -

3

TMDS data 2 -

13

CEC 4 TMDS Data 1+

14

Reserved (N.C. on device)

5

TMDS Data 1 Shield

15

SCL 6 TMDS Data 1 -

16

SDA 7 TMDS Data 0+

17

DDC/CEC Ground

8

TMDS Data 0 Shield

18

+5 power

9

TMDS Data 0 -

19

Hot Plug Detect (HPD)

10

TMDS Clock +

HDMI Connector Signal Pin Out

Connection

17

Conductor Identification

RJ-45 Plug Pin
Assignment

Color Code for Conductor

Pair 1
5

White-Blue

4

Blue

Pair 2
1

White-Orange

2

Orange

Pair 3
3

White-Green

6

Green

Pair 4
7

White-Brown

8

Brown

RJ-45 Wiring Information & Coding

Looking into connector

Connection

18

One-to-One System Connection Example

Connection

19