Page 1
Zigen ZIG-PHASED
18G 1x2 HDMI Repeater and HDMI/ARC Audio Extractor
ZIG-PHASED User Manual
UM-001-0001-000-01 | March 12, 2021
Page 2
2 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
Read this user manual carefully before using the product. Pictures shown in this manual are for reference
only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for maintenance
assistance. The functions described in this version were updated on March 2021. In the constant effort
to improve the product, we reserve the right to make function or parameter changes without notice or
obligation. Please refer to Zigen dealers for the latest details.
This warning symbol is used to alert anyone to heed important operating, installing, and
maintenance instructions. Failure to do so could result in injury to installers and end-users
or damage to equipment.
This lightning symbol is used to alert anyone of the presence of dangerous voltage that has
the potential to cause serious injury to installers and end-users.
Safety Statements
1. Follow all instructions and heed all warnings.
2. Do not expose equipment to rain or moisture and ensure that no objects containing liquids are placed
on top of equipment. This includes cups, glasses, or vases.
3. Do not place equipment in confined spaces such as cabinets or bookshelves. Do not block any
ventilation holes of equipment that may restrict airflow. This may cause dangerous overheating, fire
hazard, or electric shock.
4. Do not place near heat sources such as fireplaces, heaters, boilers, radiators or any apparatus that
produce heat such as computers or power amplifiers.
5. Unplug equipment from power supply during dangerous lightning conditions or during prolonged
periods of non-use.
6. Keep power cord away from walking traffic. Keep cord from being pinched by heavy objects.
7. Always unplug power supply before cleaning equipment. Clean only with dry cloth.
8. Handle equipment with proper Electro-Static-Discharge (ESD) practices. Failure to do so may result
in equipment failure.
9. Only use attachments or accessories specified by the manufacturer.
10. No user serviceable parts inside. Refer all servicing to qualified service personnel.
11. Batteries that may be included with this product and/or accessories should never be exposed to open
flame or excessive heat. Always dispose of used batteries according to the instructions.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. It has been
tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which case the user
at their own expense will be required to take whatever measures may be necessary to correct the
interference. Any changes or modifications not expressly approved by the manufacture would void the
user’s authority to operate the equipment.
Important Safety Instructions
Page 3
3 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
The ZIG-PHASED, packaged with the following items:
• 1x ZIG-PHASED 1 x 2 HDMI Repeater and Audio Extractor
• 1x Universal 100-240 VAC, 12V/1A Power Supply
• 2x Wall Mounting Ears including Hardware
• 1x 5-pin Phoenix Connector for Balanced Analog Audio Interface
• 4x Plastic Cushions
• 1x User Manual
If any of these products are not present upon first opening of the package, please contact Zigen or your
dealer.
© 2021 Zigen, Corp. All Rights Reserved.
All trademarks are the property of their respective owners.
Zigen, Corp. reserves the right to make changes in the hardware, packaging,
and any accompanying documentation without prior written notice.
Packing List
Page 4
4 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
Video Connection
HDMI 2.0b
Content Protection
HDCP 1.4 | 2.2
Maximum Video Resolution
4K60P UHD 4:4:4, 4K60P UHD 4:2:2 HDR
HDMI Inputs
1x
HDMI Outputs
2x
Optical Output (Digital Audio)
1x
Analog Unbalanced Audio Output
Left/Right (RCA)
Analog Balanced Audio Output
Left/Right (Phoenix Connector)
2-Pin Power Input Jack
1x (Locking Connector)
Maximum HDMI Bandwidth
17.82 Gbps
Color Space Support
RGB, YUV
YUV Subsampling
4:4:4, 4:2:2, 4:2:0
Full Color Depth
8 bits, 10 bits, 12 bits
High Dynamic Range (HDR)
Dolby Vision | HDR10+ | HDR10 | HLG
Audio Format (HDMI Output)
7.1 Channel PCM, DTS, DTS-HD, DTS-HD Master, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, Dolby Atmos
Audio Format (Optical Output)
2-Channel PCM, Dolby Digital, DTS
Audio Format (Unbalanced RCA
Output)
2-Channel Stereo PCM
Audio Format (Balanced Phoenix
Output)
2-Channel Stereo PCM
EDID Management
✓
CEC ✓ Video Test Signal Generator
✓
ARC (HDMI Output #1)
HDMI Input, Optical Output, and Analog Audio Outputs (2-Channel PCM)
Power
12VDC @ 1A, Center pin hot
Dimensions
160.0mm x 22.5mm x 94.0mm | 6.30 inches x 0.89 inch x 3.70 inches
Weight
453 grams | 1.0 pound
Temperature
0° to 40° C (10% - 90% Non-Condensing Humidity) | 32° to 104° F
HDMI 4K 600Mhz ESD Protection
Exceeds IEC61000-4-2 (Level 4)
Contact/Air Gap Discharge on
External Lines
±15-kV
Regulatory Safety and Emissions
CE | FCC | RoHS | UL Listed Power Supply
Specifications
Page 5
5 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
1 Overview ..................................................................................................................................................... 6
2 Front Panel .................................................................................................................................................. 7
Video Mode Selection ...................................................................................................................................... 7
HDR Selection .................................................................................................................................................. 8
Audio Selection ................................................................................................................................................ 8
Audio Source Selection .................................................................................................................................... 9
Control (USB Type-C) ....................................................................................................................................... 9
HDMI Input ...................................................................................................................................................... 9
HDCP Management ......................................................................................................................................... 9
ARC CEC Settings ............................................................................................................................................ 10
Locking and Unlocking the Pushbuttons ......................................................................................................... 10
3 Rear Panel ................................................................................................................................................. 11
HDMI Outputs................................................................................................................................................ 11
Optical Output ............................................................................................................................................... 11
Unbalanced Analog Audio RCA Outputs ......................................................................................................... 11
Balanced Analog Audio Outputs ..................................................................................................................... 11
Power ............................................................................................................................................................ 12
4 Installation ................................................................................................................................................. 13
Video ............................................................................................................................................................. 13
Audio ............................................................................................................................................................. 13
Power ............................................................................................................................................................ 13
ARC Extraction Mode without an ARC Enabled Audio/Video Receiver at the Input ......................................... 14
ARC Passive Mode with an ARC Enabled Audio/Video Receiver ...................................................................... 14
5 Interconnect Diagram Examples ................................................................................................................. 15
6 Contacting Zigen ....................................................................................................................................... 17
7 Warranty Information ............................................................................................................................... 18
8 Document Revision History ........................................................................................................................ 19
Table of Contents
Page 6
6 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
1 Overview
The ZIG-PHASED is a simple HDMI 2.0 1x2 Repeater, which takes a single HDMI source and outputs the
audio and video to two independent HDMI sinks. The HDMI outputs are featured with independent
scaling capabilities and will automatically optimize the video resolutions depending on the capabilities
of the connected displays. As a repeater, this is a perfect solution for mixed resolution environments
where a sink can output a video resolution for the display with highest resolution, such as UHDp60 4:4:4,
while downscaling the opposing output connected to a lower resolution display, such as 1080p60.
The ZIG-PHASED is also an audio extractor from HDMI Input or ARC (HDMI Output 1). Table 1 shows
where the extracted audio can be heard.
Table 1: Audio Source to Audio Output support.
Source of Extracted Audio
Audio Outputs
HDMI Input
• Analog Audio Balanced/Unbalanced (2-Channel PCM Stereo Only)
• Optical (2-Channel PCM, Dolby Digital, and DTS)
• HDMI Output 1 (Multi-Channel Dolby/DTS Surround Sound)
• HDMI Output 2 (Multi-Channel Dolby/DTS Surround Sound)
ARC (HDMI Output 1)
• Analog Audio Balanced/Unbalanced (2-Channel PCM Stereo Only)
• Optical (2-Channel PCM, Dolby Digital, and DTS)
• HDMI Input (Multi-Channel Dolby/DTS Surround Sound)
The ZIG-PHASED is an EDID Manager to configure the audio and video of an HDMI source. Multiple builtin video resolution EDID settings can be selected with enable/disable control of HDR. Multiple Audio
formats can be chosen from 2-channel PCM to the latest surround sound formats. EDID from any sink
can be stored permanently in two memory slot locations and can be later recalled for use even though
that sink had been disconnected from the unit.
The ZIG-PHASED is also a fixed pattern test signal generator. Different test patterns can be produced at
different resolutions depending on the capabilities of the connected HDMI sinks.
The ZIG-PHASED is a multi-purpose audio/video tool. As an HDMI2.0 1:2 Repeater, it has independent
automatic scaling at the outputs for mixed resolution environments. As an audio extractor, it can extract
audio from an HDMI source or from Audio Return Channel (ARC) from Smart TVs without the need for
an Audio/Video Receiver in the system. With its EDID Management feature and Test Pattern Generator,
the ZIG-PHASED is an invaluable tool to help integrators fix common problems in the field.
Overview
Page 7
7 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
2 Front Panel
The ZIG-PHASED uses pushbuttons with LEDs to configure the unit’s Video mode, HDR support, Audio
Format mode, and Audio Source selection. Repeated pressing of the pushbutton cycles through the
modes. Refer to the table printed on the top of the unit to determine the selected modes.
Video Mode Selection
The Video Selection has one pushbutton and four LED mode indicators. Pressing the pushbutton will
cycle through the different modes. Below is the Video Selection mode table:
Video Mode
Function
0 0 0 1
Auto – Use EDID from the sink with the lowest native resolution. This will ensure that
video will always be displayed on both HDMI outputs in mixed resolution
environments.
0 0 1 0
1080p60 – Source EDID set for 1080p60.
0 0 1 1
2160p30 – Source EDID set for 2160p30.
0 1 0 0
2160p60 – Source EDID set for 2160p60.
0 1 0 1
EDID OUT 1 – Source EDID from connected sink on HDMI Output 1.
0 1 1 0
EDID OUT 2 – Source EDID from connected sink on HDMI Output 2.
0 1 1 1
Stored EDID 1 – Use memorized EDID 1.
Note: Press and hold the Audio SRC pushbutton to permanently store the EDID from
the connected sink on HDMI Output 1.
1 0 0 0
Stored EDID 2 – Use memorized EDID 2.
Note: Press and hold the Audio SRC pushbutton to permanently store the EDID from
the connected sink on HDMI Output 2.
1 0 0 1
Checkerboard – Test Signal Output, Black and White Checkerboard.
1 0 1 0
Ramp – Test Signal Output, Black to White Ramp.
1 0 1 1
Red Ramp– Test Signal Output, Black to Red Ramp.
1 1 0 0
Green Ramp– Test Signal Output, Black to Green Ramp.
1 1 0 1
Blue Ramp– Test Signal Output, Black to Blue Ramp.
1 1 1 0
White – Test Signal Output, White Field.
1 1 1 1
PRBS – Test Signal Output, Pseudo Random Bit Stream.
1
1 2 3 4 5
6
Front Panel
Page 8
8 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
HDR Selection
The HDR Selection has one pushbutton and two LED mode indicators. Pressing the pushbutton will cycle
through the different modes. Below is the HDR Selection mode table:
HDR Mode
Function
0 1
BYPASS – Source EDID set to allow HDR if available.
1 0
HDR OFF – Source EDID set to disable HDR.
Audio Selection
The Audio Selection has one pushbutton and three LED mode indicators. Pressing the pushbutton will
cycle through the different modes. Below is the Audio Selection mode table:
Audio Mode
Function
0 0 1
Bypass – Source EDID set to default audio format.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2-Channel
PCM. Noise may be heard from these outputs if the default audio format is
multi-channel surround sound.
0 1 0
Stereo Only – Source EDID sets audio format for 2-Channel PCM only. All
surround sound formats are disabled.
0 1 1
5.1 – Source EDID sets audio format for up to 5.1 Surround Sound. Multichannel 7.1 Surround Sound or greater are disabled.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2-Channel
PCM. Noise may be heard from these outputs if the audio format is multichannel surround sound.
1 0 0
7.1 – Source EDID sets audio format for up to 7.1 Surround Sound. Multichannel formats with higher channel counts are disabled.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2-Channel
PCM. Noise may be heard from these outputs if the audio format is multichannel surround sound.
1 0 1
Dolby Only – Source EDID set to allow all Dolby formats only. All DTS formats
are disabled.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2-Channel
PCM. Noise may be heard from these outputs if the audio format is multichannel surround sound.
1 1 0
DTS Only – Source EDID set to allow all DTS formats only. All Dolby formats are
disabled.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2-Channel
PCM. Noise may be heard from these outputs if the audio format is multichannel surround sound.
2
3
Front Panel
Page 9
9 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
Audio Source Selection
The Audio Source Selection has one pushbutton and two LED mode indicators. Pressing the pushbutton
will cycle through the different modes. Below is the Audio Source Selection mode table:
Audio Source Mode
Function
0 1
HDMI In – Audio from the HDMI Input is extracted and sent to the HDMI
Outputs, Optical, Audio Unbalanced Output, and Audio Balanced Output.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2Channel PCM. Noise may be heard from these outputs if the ARC audio
format is multi-channel surround sound.
1 0
ARC – Audio from the Audio Return Channel (ARC) is extracted and sent to
HDMI Input, Optical Output, Audio Unbalanced Output, and Audio
Balanced Output.
Note: Analog Audio Balanced and Unbalanced Outputs only support 2Channel PCM. Noise may be heard from these outputs if the ARC audio
format is multi-channel surround sound.
Control (USB Type-C)
The Control port (USB Type-C) is used for firmware updates. Connect a Windows PC to this port and run
the ZIG-PHASED Firmware Update Application (available on the Zigen website). Download the latest ZIGPHASED firmware then follow the instructions on the Application.
HDMI Input
Connect a video source to this HDMI input. If an Audio/Video Receiver (AVR) capable of Audio Return
Channel (ARC) is connected to this input, the ARC stream from HDMI Output 1 will be passed to this
input if ARC is enabled from the sink.
Note: Zigen highly recommends the use of premium 4K certified HDMI cables when viewing UHD 60p
4:4:4 or UHD 60p HDR 4:2:2 video resolutions. Zigen offers these premium 4K certified cables in varying
lengths from 3 meters to 9 meters.
HDCP Management
There are two settings for HDCP Management: Auto, and Force HDCP 1.4. By default, the Auto setting
will support the HDCP protocol of the input source (HDCP 2.2 or HDCP 1.4) and the HDCP protocol
supported by the connected sink. However, certain installations may require the ZIG-PHASED HDMI
Outputs to enforce HDCP 1.4 to ensure compatibility with certain legacy displays regardless of the HDCP
protocol of the input source.
To force HDCP 1.4 only at the output, press and hold the HDR pushbutton for approximately 2 seconds
until the Video LEDs illuminate 0001 and all other LEDs in the front panel are off. To revert back to
4
5
Front Panel
6
Page 10
10 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
default mode, Auto, press and hold the HDR pushbutton for approximately 2 seconds until the Video
LEDs illuminate 0011 and all other LEDs in the front panel are off. The HDCP Management setting will
be memorized and recalled during a power cycle.
ARC CEC Settings
The ARC CEC Settings can be set to “AUTO” or “OFF” depending on the installation. If the Phased is used
to extract ARC from a SmartTV and there is no ARC featured AVR connected on its HDMI Input (refer to
Figure 2: ZIG-PHASED 1:2 Repeater. Audio extracted from HDMI In or ARC from SmartTV.), then
configure ARC CEC to “Auto” to allow the Phased to negotiate with the SmartTV to output its ARC audio.
In this interconnect, the Phased becomes the “Audio System”.
If the Phased is used in conjunction with an ARC featured AVR at the input (refer to Figure 3: ARC Passive
Mode with an ARC Enabled Audio/Video Receiver.), then configure ARC CEC to “Off” to allow the AVR
to negotiate with the SmartTV to output its ARC audio. In this interconnect, the AVR becomes the “Audio
System”.
To configure ARC CEC Settings to “Off”, press and hold the Audio pushbutton for approximately 2
seconds until the ARC Source LEDs illuminate 10 and all other LEDs in the front panel are off. To configure
ARC CEC Settings to “Auto”, press and hold the Audio pushbutton for approximately 2 seconds until the
ARC Source LEDs illuminate 11 and all other LEDs in the front panel are off. Once the desired ARC CEC
Settings are configured, power cycle the Phased to apply the new settings.
Important: If the ARC CEC Settings is changed, power cycle the Phased so the new settings
will take effect.
Locking and Unlocking the Pushbuttons
Once the ZIG-PHASED pushbutton modes have been set, the pushbuttons can be locked to prevent
accidental presses and inadvertent changes to the unit’s operation. To lock the pushbuttons, press and
hold both VIDEO and AUDIO SRC at the same time until the front panel LEDs change illumination to all
off. The front panel pushbuttons are now locked and the operational modes cannot be changed.
To unlock the pushbuttons, press and hold both VIDEO and AUDIO SRC at the same time until the front
panel LEDs change illumination to all off. The unit’s operational modes can now be changed using the
pushbuttons.
Front Panel
Page 11
11 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
3 Rear Panel
HDMI Outputs
Connect displays or any HDMI sinks to the ZIG-PHASED HDMI Outputs. The video and embedded audio
from the HDMI Input will be routed to both HDMI outputs.
If ARC is enabled and the ZIG-PHASED is the Audio System, ARC audio sourced from a SmartTV on HDMI
Output 1 will be extracted and can be heard on the unit’s Optical and Analog Audio Outputs.
If ARC is enabled and an AVR is connected at the ZIG-PHASED HDMI Input, ARC audio sourced from a
SmartTV will be passed through to HDMI input #1 where the AVR can process the sound and output to
its connected speakers.
Optical Output
This Optical port will output the embedded digital audio either from the HDMI Input or from HDMI Out
ARC depending on the Audio Source mode (refer to section Audio Source Selection). The Optical output
supports 2-Channel PCM as well as surround sound formats like Dolby Digital and DTS.
Unbalanced Analog Audio RCA Outputs
The Unbalanced RCA Left/Right connectors will output analog audio from the HDMI Input or from HDMI
Out ARC depending on the Audio Source mode (refer to section Audio Source Selection). Only 2-Channel
Stereo PCM audio format is supported. Noise may be heard on the RCA Outputs if a surround sound
audio format, such as 5.1, 7.1, Dolby Digital, DTS, etc., is configured.
Balanced Analog Audio Outputs
The Phoenix Connector terminal block will output Professional level Balanced Left/Right analog audio
either from the HDMI Input or from HDMI Out ARC depending on the Audio Source mode (refer to
section Audio Source Selection). Only 2-Channel Stereo PCM audio format is supported. Noise may be
heard on the Balanced Audio Outputs if a surround sound audio format, such as 5.1, 7.1, Dolby Digital,
DTS, etc., is configured.
The Phoenix connector terminal block needs to be connected with appropriate cables terminated with
male XLR connectors, ¼” TRS Phono Jacks, or any other termination connectors required by the
Rear Panel
8
11 7 7
8
9
10
9
10
Page 12
12 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
installation. The required pinout of the Phoenix connector is shown in Figure 1: Balanced Audio Phoenix
Connector Pinout.
Power
The ZIG-PHASED requires 12VDC @ 1Amp to power the unit. Use the included power adaptor and ensure
the locking ring is threaded snugly to prevent inadvertent disconnection of the power jack. Make sure
all video, audio, and control ports are properly connected before applying power to the ZIG-PHASED.
11
1
2
3
1
2
3
XLR Male – Audio Output
+
-
-
+
1 = Shield
2 = (+)
3 = (-)
Left
Right
T
R
S
TRS Phono Jack
T
R
T = (+)
R = (-)
S = Shield
Left
Right
S
T
R
S
T
R
S
+
-
+
-
Figure 1: Balanced Audio Phoenix Connector Pinout
Rear Panel
Page 13
13 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
4 Installation
Video
1. Use an HDMI cable to connect UltraHD sources to the Input on the front panel of the unit.
2. Use a HDMI cables to connect displays or any other sinks to the Output on the rear panel of the
unit.
The HDMI cable can then be connected in any of the following ways:
• Connect the HDMI cables to an Ultra HD display.
• Connect the HDMI cables to another Zigen switch or splitter, for cascading purposes.
Note: Zigen highly recommends the use of premium 4K certified HDMI cables when
viewing UHD 60p 4:4:4 or UHD 60p HDR 4:2:2 video resolutions. Zigen offers these
premium 4K certified cables in varying lengths from 3 meters to 9 meters.
Audio
3. Determine the audio interconnect requirement in the installation. For multi-channel surround
sound formats such as Dolby Digital or DTS, use the Optical interface or ARC passed through the
HDMI input.
4. To connect to multi-zone amplifiers with pre-amp analog inputs, connect the ZIG-PHASED
unbalanced RCA or professional-level balanced audio connectors to the amplifiers. The audio
source can be selected from either the HDMI input or ARC from HDMI Output 1.
Power
5. Connect the included 12V DC locking power supply to the 12V DC power receptacle on the rear
panel of the switch.
6. Connect the power supply to an electrical outlet.
IMPORTANT: Remove power from the ZIG-PHASED when connecting new video and
audio cables or changing the video and audio cable interconnects. Failure to do so
could cause irreparable damage to the unit or cause injury to installers and end-users.
IMPORTANT: Ensure that all video, audio, and control port interconnects are properly
connected before applying power to the unit. Failure to do so could cause irreparable
damage to the unit or cause injury to installers and end-users.
Installation
Page 14
14 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
ARC Extraction Mode without an ARC Enabled Audio/Video Receiver at the Input
The ZIG-PHASED can extract ARC audio from a Smart TV connected to HDMI Output 1 even if there
is no ARC supported AVR or SoundBar in the system (refer to Figure 2). In this mode, the ZIG-PHASED
becomes an Audio System to negotiate with the Smart TV and enable its ARC. The ZIG-PHASED can
redirect the extracted ARC to the Optical, Unbalanced Audio, and Balanced Audio outputs. To enable
this type of ARC functionality, the ZIG-PHASED EDID Modes must be configured as follows:
PHASED EDID Modes
VIDEO
Any Video Modes
HDR
Any HDR Modes
AUDIO
Any Audio Modes
AUDIO SRC
HDMI In (01) or ARC (10), depending on the desired audio
to be heard on the Optical, Unbalanced Audio, and
Balanced Audio.
ARC CEC Settings
AUTO
ARC Passive Mode with an ARC Enabled Audio/Video Receiver at the Input.
If an ARC featured AVR is connected to the ZIG-PHASED HDMI Input, ARC from a Smart TV connected
to HDMI Output 1 will be redirected back to the AVR (refer to Figure 3). In this mode, the AVR at the
input becomes the Audio System to negotiate with the Smart TV. The ZIG-PHASED becomes passive
and will redirect all CEC and ARC traffic from its HDMI Output 1 to its HDMI Input. To enable this
type of ARC functionality, the ZIG-PHASED EDID Modes must be configured as follows:
PHASED EDID Modes
VIDEO
EDID Out 1 (0101)
HDR
Bypass (01)
AUDIO
Bypass (001)
AUDIO SRC
HDMI In (01) or ARC (10), depending on the desired audio
to be heard on Optical, Unbalanced Audio, and Balanced
Audio.
ARC CEC Settings
OFF
Important: Some AV Receivers in ARC mode will mute the embedded audio on its HDMI
Output because the manufacturer assumes the user wants all audio to be heard on the
speakers directly connected to that AVR. Because of this phenomenon, the ZIG-PHASED
will not receive any audio from the AVR and no sound will be heard on the ZIG-PHASED
HDMI Outputs, Optical, and Analog Audio interfaces. This is not a fault or failure of the
ZIG-PHASED unit, but a design choice of certain AV Receiver manufacturers. Please take
this phenomenon into account when deciding on the ZIG-PHASED interconnect.
ARC Functionality
Page 15
15 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
5 Interconnect Diagram Examples
Interconnect Diagram Examples
SmartTV
AV Receiver
Multi-Zone Amplifier
ZIG-PHASED
Media Player
Video
Audio
Figure 2: ZIG-PHASED 1:2 Repeater. Audio extracted from HDMI In or ARC from SmartTV.
SmartTV 1
Displaying Built-in
Media App
TV 2 Displaying
Video from AVR
ZIG-PHASED
Video
Audio
Blu-Ray
ZIG-PHASED in ARC Passive Mode.
ALL AUDIO OUTPUT CONNECTORS
WILL BE MUTED.
AV Receiver
(ARC Support)
Figure 3: ARC Passive Mode with an ARC Enabled Audio/Video Receiver.
Page 16
16 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
Interconnect Diagram Examples
TV 1 Displaying
Test Pattern
TV 2 Displaying
Test Pattern
ZIG-PHASED
Video
Figure 4: ZIG-PHASED outputting Test Patterns.
Page 17
17 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
6 Contacting Zigen
Technical Support
Tel: (818) 654-5252
Fax: (818) 654-5355
9:00AM - 5:00PM (PST)
Email
info@zigencorp.com
Web
www.zigencorp.com
Mailing Address
Zigen Corp.
c/o Customer Service
16135 Wyandotte Street
Lake Balboa CA 91406
USA
Contacting Zigen
Page 18
18 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
7 Warranty Information
Powered Product Warranty
Zigen, Inc. warrants its powered products against any defects in materials and workmanship for a period
of three years from the date of invoice. Touchscreen displays carry a one-year parts and labor warranty.
If a malfunction occurs during the warranty period, Zigen, Inc. will repair or replace a product to its
original operating condition. A return authorization number must be obtained from Zigen, Inc. before
products are returned for service.
Non-Powered and Cable Products - Lifetime Limited Performance Warranty
Zigen, Inc. warrants that its non-powered products and cable products will be free from defects in
material and workmanship for as long as you or your customer owns the product. All Zigen non-powered
products and cables are designed and engineered to meet and exceed performance specifications. If, at
any time, the product fails due to manufacturer defect, Zigen will repair or replace the product to ensure
that it meets original performance specifications. Reduced performance due to normal wear and tear,
or damages caused by misuse or negligence will not be covered. Zigen will test and evaluate all nonpowered and cable products claimed defective. Products must be shipped to Zigen, prepaid along with
proof of purchase only after obtaining a Return Merchandise Authorization (RMA) number from the
Zigen. This statement of policy is in lieu of any other policy expressed or implied and no representative
or person is authorized to assume any other liability or adopt any other policy for Zigen without our
written consent.
Return Policy
If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund,
less shipping and handling. Zigen will not be responsible for shipping and handling of product returns.
Returns will only be accepted of products with proof of purchase, products in the original packaging with
zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen.
Warranty Information
Page 19
19 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
ZIG
-PHASED User Manual
8 Document Revision History
V00 – March 12, 2021
1. Added ARC Passive Mode description.
2. Added ARC Extraction Mode description.
3. Added ARC CEC Settings feature.
4. Updated Audio Output Connector information when in ARC Passive Mode.
V00 – February 01, 2021
1. Updated information for Video Mode Auto (0001).
2. Updated information for Front Panel Lock/Unlock.
V00 – December 30, 2020
3. Added HDCP Management (effective ZIG-PHASED Firmware d12.29.20 or newer).
4. Updated the Rear Panel picture.
5. Updated Table 1.
6. Updated Figure 3.
V00 – December 18, 2020
1. ZIG-PHASED User Manual Initial Release.
Document Revision History
Loading...