Zigen ZIG-18DA User Manual

Function
ZIG-14DA
ZIG-18DA
HDMI Input Connector
(A-Type Female)
1
1
HDMI Output Connector
(A-Type Female)
4
8
Max. Resolution
UXGA, 1080p (12Bits)
Cable Distance
(Device to Monitor)
10 m (Max.)
Signal Type
Standard HDMI Signal
Power Adapter (Min.)
DC 12V 600mA
AC100~240V
Housing
Metal
Weight
975 g
2340 g
Dimensions (LxWxH)
mm
269x104x45
440x185x45
Pin #
Signal
Pin #
Signal
1
TMDS Data 2+
11
TMDS Clock Shield
2
TMDS Data 2 Shield
12
TMDS Clock -
3
TMDS Data 2-
13
CEC
4
TMDS Data 1+
14
Reserved (N.C. on device)
5
TMDS Data 1 Shield
15
SCL
6
TMDS Data 1-
16
SDA
7
TMDS Data 0+
17
DDC/CEC Ground
8
TMDS Data 0 Shield
18
+5 Power
9
TMDS Data 0-
19
Hot Plug Detect
10
TMDS Clock+
1 AC power cord for ZIG-18DA.  2 rack rails, 8 screws for ZIG-14DA only.  2 rack rails, 6 screws for ZIG-18DA.
Introduction
-1-
Technical Specifications Input/Output Signal
HDMI Distribution Amplifier
(ZIG-14DA)
(ZIG-18DA)
USER MANUAL V1.0
ZIG-14DA / ZIG-18DA
Package Contents-
1 ZIGEN ZIG-14DA or ZIG-18DA HDMI Distribution
Amplifier.
1 user manual.  1 power adapter DC 12V 600mA for ZIG-14DA.
ZIGEN ZIG-18DA HDMI Distribution Amplifier with 3D Support
ZIGEN 1x8 HDMI distribution amplifiers allow users to split any HDMI digital video with embedded audio source to 8 HD displays. ZIG-18DA will split the HDMI signal to 8 outputs without signal loss and maintain high resolution up to 1080p/60Hz, 3D and 1920x1200 computer signals.
Features
HDCP compliant Panel Link digital technology. Can be cascaded up to 8 layers 3D Function Support.
Full HD support: 1080p@24/60Hz, 3D. Support high-resolution display up to UXGA, 480p, 480i, 720p, 1080i, 1080p, 1920x1200 deep colors up 12 bits.
Supports uncompressed PCM 2- Ch. Audio,
5.1, 7.1, DTS-HD, Dolby audio format. 1U rack design.
Specifications
FRONT VIEW
1. Power LED
REAR VIEW
1. Input Power Jack
2. HDMI In” Port
3. HDMI Out” Port *There are 4/8 out ports for ZIG-14DA / ZIG-18DA
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.
-2-
Installation
1. Turn off the DVD player/TV receiver and monitors.
2. Connect the HDMI male extension cable between the DVD player/TV receiver and the “HDMI In” port of Distribution Amplifier.
3. Connect the HDMI male/female extension cables between the monitors and the “HDMI Out” ports of Distribution Amplifier.
4. Connect the power cord and turn on the Distribution
Amplifier.
5. Turn on the DVD player/TV receiver and monitors.
Note:
Have to install all TVs with the same resolution limits. We suggest user connect TV from HDMI Out 1 first.
Because Distribution Amplifier will simulate EDID from HDMI Out 1.
We suggest users to connect source equipment to
Distribution Amplifier by ZIGEN manufactured cable for best video quality.
Operation for cascade:
1. The function to display identical image on more monitors, you have to attach another Distribution Amplifier.
2. Connect the HDMI male/female extension cable between the first Distribution Amplifier of the “HDMI Out
1” port and the second Distribution Amplifier of the HDMI In” port.
Note:
Even though you are allowed to cascade the Distribution Amplifier with varied ports, the image might become unstable if cascaded more than 8 tiers of Distribution Amplifier.
-3-
P.S.: The example cascades the 4 and 8 ports Distribution Amplifier; however, you can cascade the HDMI Distribution Amplifier with demanded port.
-4-
Loading...