idlock.no/zigbee
ID Lock 150
Zigbee Module
English User Manual
• Update ID Lock 150 with the ”Updater app”.
The Zigbee module is compatible with lock
firmware from v1.5.0.
See idlock.no/updater for more information.
• Open the door.
• Remove batteries.
• Place the module in the slot marked “Remote
Control” (see illustration 1).
• Insert batteries.
• Activate “Add unit” in the app for your hub or
scan the QR code.
Please follow instructions from your hub
manufacturer. Secure inclusion (QR code) may
not be available on all hubs.
• The module is added by itself.
A blue LED flashes when the module
synchronizes and is added.
Sounds may be heard from the lock during the
process.
• Open the door.
• Hold key button until panel is activated.
• Enter [Master PIN], followed by [*].
• Enter digit [2], followed by [*].
• Enter digit [0].
• Open the door.
• Hold key button until panel is activated.
• Enter [Master PIN], followed by [*].
• Enter digit [2], followed by [*].
• Enter digit [5].
Please refer to the next page for technical details and
properties for the Zigbee module.
The batteries must be removed when removing and
placing the module in the ID Lock 150. If not, the module
can take damage.
Preparation
Add lock
Remove lock
Manual sync
Technical details
Warning!
1: Place the module in the slot(A) marked "Remote
Control" after removing batteries.
idlock.no/zigbee
Basic cluster (0x0000)
Attributes
Identifier
Name
Type
Value
0x0000
ZCL version
INT8U (0x20)
3
0x0001
Application
version
INT8U (0x20)
2
0x0002
Stack version
INT8U (0x20)
65
0x0004
Manufacturer
name
ASCII_STR (0x42)
Datek
0x0005
Model identifier
ASCII_STR (0x42)
ID Lock 150
0x0007
Power source
ENUM8 (0x30)
3
0x4000
Build id
ASCII_STR (0x42)
0.7
0xfffd
Cluster revision
INT16U (0x21)
1
Basic cluster (0x0000)
Manufacturer specific attributes
Identifier
Name
Type
Value
0x5000
Lock fw
ASCII_STR (0x42)
1.5.0
Power Configuration cluster (0x0001)
Attributes
Identifier
Name
Type
Value
0x0021
Battery
percentage
INT8U
(0x20)
45
0xfffd
Cluster revision
INT16U (0x21)
1
Identity cluster (0x0003)
Attributes
Identifier
Name
Type
Value
0x0000
Identify time
INT16U
(0x21)
0
0xfffd
Cluster revision
INT16U (0x21)
1
Commands
0x00: Identify
0x01: IdentifyQuery
Door lock cluster (0x0101)
Manufacturer specific attributes
Ident.
Name
Type
Value
0x4000
Master
PIN
mode
BOOLEAN
(0x10)
True: Master PIN unlock
ENABLED
False: Master PIN unlock
DISABLED
0x4001
RFID
enabled
BOOLEAN
(0x10)
True: RFID ENABLED
False: RFID DISABLED
0x4002
Hinge
mode
BOOLEAN
(0x10)
False: Right hinged door
True: Left hinged door
0x4003
Service
PIN
mode
INT8U (0x20)
0: Deactivated (default)
1: 1x use
2: 2x uses
3: 5x uses
4: 10x uses
5: Random PIN 1x use
6: Random PIN 24 hours
7: Always valid
8: 12 hours
9: 24 hours
0x4004
Lock
mode
INT8U (0x20)
0: Auto lock OFF/Away mode
OFF
1: Auto lock ON/Away mode
OFF
2: Auto lock OFF/Away mode
ON
3: Auto lock ON/Away mode
ON
0x4005
Relock
enabled
BOOLEAN
(0x10)
True: ReLock ON
False: ReLock OFF
0x4006
Audio
volume
INT8U (0x20)
0: Volume off
1-5: Volume level
5: Default
Note! Service PIN mode 5 and 6 returns a random generated PIN and
mode 1 or 9. Available from firmware 1.5.5.
Door lock cluster (0x0101)
Attributes
Ident.
Name
Type
Value
0x0000
Lock state
ENUM8
(0x30)
0x00: not fully locked
0x01: locked
0x02: unlocked
0xff: undefined
0x0001
Lock type
ENUM8
(0x30)
0x00 (deadbolt)
0x0002
Actuator
enabled
BOOLEAN
(0x10)
False
0x0003
Door state
ENUM8
(0x30)
0x00: open
0x01: closed
0x02: error jammed
0x03: error forced open
0x04: error unspecified
0xff: undefined
0x0012
Num PIN
users
INT16U
(0x21)
25
0x0013
Num RFID
users
INT16U
(0x21)
25
0x0017
Max pin
length
INT8U
(0x20)
10
0x0018
Min pin
length
INT8U
(0x20)
4
0x0024
Sound
volume
INT8U
(0x20)
0x00: Silent
0x01: Low
0x02: High
0x0033
Require PIN
for RF
operation
BOOLEAN
(0x10)
0xffff
0x0041
Keypad
operation
event mask
BITMAP16
(0x19)
0xffff
0x0042
RF operation
event mask
BITMAP16
(0x19)
0xffff
0x0043
Manual
operation
event mask
BITMAP16
(0x19)
0xffff
0x0044
RFID
operation
event mask
BITMAP16
(0x19)
0xffff
0x0045
Keypad
programming
event mask
BITMAP16
(0x19)
0xffff
0x0046
RF
programming
event mask
BITMAP16
(0x19)
0xffff
0x0047
RFID
programming
event mask
BITMAP16
(0x19)
0xffff
0xfffd
Cluster
revision
INT16U
(0x21)
1
Commands
0x00: Lock Door
0x01: Unlock Door
0x05: Set PIN
0x06: Get PIN
0x07: Clear PIN
0x08: Clear all PINs
Revision:
0.4
Approved date:
2020-11-24
Approved by:
ALR
Language:
English
Loading...