Zida Technologies MB-P845GL User Manual

chapter 2:Production Introduction
Front Panel Function Header
The mainboard PANEL header has a standard set of switch and indicator connectors that are commonly found on ATX system cases.Use the
illustration below to make the correct connections to the case switches and indicators.Front Panel Function Header include connections the following features:
Function ConnectorPin-Out Label System Reset RESET Power LED PW-LED Hard Drive Activity LED HD-LED Soft-Touch ButtonPower On/Off PW-BN
External Speaker Speaker
Product Introduction
Audio FrontPanel Header
It provides the earphone output and microphone input in the Front panel of computer box.
Mainboard Manual
page 17
chapter 2:Product Introduction
The header pin-out is as follows
Pin Signal Name
1 mic-in 2 Gnd 3 Audio Vref-out 4 +5V 5 right channel output 6 right channel return 7 Hp-on 9 left channel output
10 left channel return
Please add two jumper in 5-6 & 9-10 according to the picture when you
don't need install Front Audio panel.
CPU&System FAN
Mainboard supply three FAN header with measure FAN speed function,
which can be watched in BIOS.
CautionAssure CPU FAN run in work state,or CPU will damage for
overheat.
CNR(Communication Audio Modem Riser)
Support the CNR card with Audio/Modem/Lan function.
Only for A845E / A845DD / A845SD / P845SD
CD Audio connector
It's connected to CD-ROM by a CD cable.
AUX-IN Audioheader
It receive audio output from CD-ROM,TV or MPEG card.
page 18
Mainboard Manual
chapter 3:Setup Quickly
Before you use this M/B,Please check chapter follow as below!
3.1 Howto identify then product's mode?
There is a bar-code that had adhibited on our product's box
and mainboard.The bar-code follow as below(include serial
number, production date ,classific -code,product's name and
model).
Production date
Serial number
Mainboard name/model
P815G-U
Mainboard Manual
Classific code
Setup Quickly
page 19
Loading...
+ 4 hidden pages