ZHUHAI HONOR TECHNOLOGY XP P User Manual

Mini mobile receipt printer

Mini mobile receipt printer

POS-P100

User Manual

Warning :

No part of this manual can be changed without agreement.

The company reverses the rights to modify the technology,

components, software and hardware. You may ask the

distributors for more product information. No part of chapter

in this manual can be copied or transmitted in any format

without permission.

Please keep user manual for reference

Mini mobile recei pt p ri nterMini mobile recei pt p ri nter

Notice

Pls read the Chapter carefully before printing!

Safety notice

The printer is equipped with professional battery and power adapter.

otherwise, it may cause product damaged, battery leakage, fire or explosion.

If not use printer longer time, take out the battery, otherwise, it may cause

battery leakage.

The liquid of battery has corrosivity, if it is on Skin or clothes under

incorrect instructions, pls wash it by water immediately. If it is in eyes, pls

wash it clearly by water and go to see doctor.

Don’t open paper house when printing or just finished working, and

forbidden to touch printhead, it may cause scald by high temperature.

The power plug as power disconnect device, and it is next to printer and

easy to touch.

Use Warning

Do not immerged the printer in water or rainy, it may cause damaged

Don’t open the paper house when printing, it may cause unnormal working

Don’t remove serial cable when COM port is working, it may cause data

incomplete.

The work distance not exceed 10 meters by Bluetooth printing, otherwise, it

may cause messy code or not work.
It works stable between 0℃ and 45℃ temperature, but higher or lower

temperature may cause low quality printing.

It may cause low quality printing and printer damaged by poor paper roll or

longer storage roller printing.

The printer will recharge after the battery all used up, then will guarantee

life time. Charge and discharge times are over 500 times, and its

function will be reduced with the times increasing.

Storage’s attentions

The printer’s storing temperature is between -10℃ 60℃ and humidity is
between 10％ ~ 80％.

If store the printer longer time, pls take the battery out and store it alone,

otherwise, it may cause the battery not work, even leakage and printer

damaged.

If the battery stored more than 3 months, then recharge it after installed to

avoid damage because of self-discharge.

Pls select good quality of thermal paper roll if keep the receipts longer.

Can not stored the paper roll in higher temperature or hotter environment. If

it’s opened, pls stored it in cool environment.

~

01 02