Zhuhai FTZ Oplink Communications RMC01 User Manual

Oplink Communications

RMC1300 User Guide

I. Product Introduction

RMC1300 is a 433MHz wireless remote control. Push the button, and it will send
arm/disarm/panic signal to the system.

System Structure

1 / 3

Oplink Communications

II. Installation

(1) Usage scenario:

• Indoors and away from direct sunlight.

• Away from extreme temperature sources and large metal objects.

(2) Operation：

• Unscrew the screw to open the back cover of Remote control.

• Insert the battery noting the polarity (A23 battery); Slide back the

cover and screw fastening with the front cove.

III. User Instruction& Workflow

(1) Press “ ” once to set arm mode of the system.
(2) Press “ ” once to set disarm mode of the system.

(3) Press “ ” once to send an emergency alert to the system.
(4) If RMC1300 is in low battery status(9.6±0.4V), it will report a message to

the system along with the control signal generated when one of the buttons
is pressed. Please change the battery then.

2 / 3