Children Smart watch
Quick Start Guide For User
Please read the manual carefully before using the product, in order to go through the
installation and set-up quickly and correctly.The color of the product is subject to the
real product.
Preparations before using the product
Make sure if the product model is correct and all the accessories are present.
Purchase a Sim Card which is enabled the GSM internet after consulting your product dealer
(Please make sure the device is switched off BEFORE inserting the SIM card.)
The SIM card for the watch is need to be GPRS-enabled and opened the Caller ID Display
function.
Install the client-side app on your mobile. You can ask your dealer regarding the details of
the app.
The bar code or QR code is used to assist with registering the user account.
For the functions of dialing and voice alert can only use the app2.
Product Features
GPS+base station ,Two mode to lactation
Mobile client-side or Computer GPRS service platform, The dual control mode
Real time GPRS positioning, tracking and monitoring.
Phone Book (for contact)
Intercom(Push-to-Talk)
Track
Watch Alarm
Safety Zones
SOS Emergency Alarm
Low Battery Alarm
Weather Forecast
Remote Shutdown
Language and Time Zone
Flashlight
Remote Camera
positive photo
Games
The Key Operating Instructions:
Voice Dialing:Long press the button,say the name of the one you want to
call on the phone book,then the watch will call this person automatically.
Restore:The watch need to be charged if you want to turn it on after
restoring.
Flashlight:Press the button continuously to turn on the flashlight,press
one more time to turn it off.
Reminder:Letu is the application game of the third party.Parents need to
install it on their mobile phone first,and then follow the user manual
to set it up.(Any related issues can consult Letu)
Client-side
5.1 APP Log In (You can download the App on your mobile or open the APP after scanning the
QR code in the user manual,it will enter the page as shown in the left side of the picture.
5.1 APP Register
You will be able to log into your account after you manually register it firstly, During the
registration process, you can either scan your 15-digit registration code or you can
manually enter the code. Each code is unique so it cannot be used more than once; if the
code already had been registered, you will have to ask the commercial agent to restore
the corresponding ID number. You need to set up the account using 4-16 numbers or
letters, The account is purely exclusive and can not be used repeatedly by anyone else;
however, if it is used by anyone else repeatedly, the original user will have to create a new
account and register again. Customers can enter other information by themselves. The
password can be modified by the user,and it will requires the registration code,the log-in
account name ,and the mobile numbers which being used for registering the account if the
user want to find the password back.The registration screen is shown in the figure given
below:
Operating Instruction
5.2 Main Interface Functions Introduction
5.2.1 APP function menu interface
After the account registration is completed,enter your account number and password on the log-in
interface and proceed,now you will be taken to the main interface. The main interface as shown in
the figure below:
Instructions about some functions:
(1)Voice Chatting:The watch can be sent voice messages to their family and friends.
Mobile phone APP can be used for sending voice messages to the watch.The longest voice
message can be 15 seconds.The children can press the sos button to play the voice message.
If the user want to use the watch for sending voice message to the app,long press the record button
in order to record the voice messages.The longest voice message is 15 seconds.(There is SMS to
remind the parents once the APP receives any voice messages.(The time that you receive the voice
messages is related to your network status.)
Sending voice messages from the watch to their friends:Long press the record button to record
messages,after loosing the button,the messages will be sent out to their friends.The longest voice
message is 15 seconds.
(2)User Information:You can fill in the information of your children,such as their basic
info,hobby,Personality.etc.
(3)Setting:To set up the operating parameters of the watch.[After Clicking the “setting”in the main
page interface will enter into this page(shown as the image below)]
:1:Setting up the SOS number: The user can set up three contact numbers as SOS numbers. In
case of an emergency, pressing the SOS key for three seconds will cause the watch to sound an
alarm and call the three assigned SOS numbers in turn (in a loop) until someone picks up.If no one
answers the numbers, the loop calls will end after 2 rounds.
2:Monitoring:Generally, the phone number which has been assigned for monitoring will be set as
the parents’.After the user begins to start this function,the watch will dial the assigned monitoring
phone number.The watch user can not hear the sounds from the mobile,but the mobile can monitor
the watch.