Zhongshan K mate General Electronics BTT014 User Manual

BTT014

Bluetooth transmitter

User’s Manual

 Before use...………………………………..…………….…...1

1. About BTT014……………………………………….….……...…1

2. Overview of BTT014……………………………………..….…....1

 Getting started…………………………………………..…..2

1. Turning on/off the transmitter...…………………………..…..…...2

2. Pairing with Bluetooth receivers..…………………………..….....2

3. Music remote control……………………………………………...3

4. LED indicator……………………………………………………..4

 Care and maintenance………………………………….…..4  FAQs…………………………………………………………4

 Specifications…………………………………………….......5

Welcome to use this stereo Bluetooth transmitter, BTT014. Please read this user’s manual carefully before use.

 Before use

1. About BTT014

BTT014 is a stereo Bluetooth transmitter especially designed for iPod and iPhone. It supports the following Bluetooth profiles:

As long as you plug the transmitter into the i Pod or iPhone and pair it with your stereo Bluetooth receivers (such as stereo Bluetooth headsets or Bluetooth speakers etc.), you can enjoy music wirelessly. Additionally, you can remote control your iPod or iPhone through operating Bluetooth receiver if your Bluetooth receiver also supports AVRCP. BTT014 can connect to two Bluetooth receivers at the same time. Operate either of the receivers to remote control iPod or iPhone. Using it as soon as you plug it in, no need to ch arge. It is very conv enient to use.

2. Overview of BTT014

Profile Description

A2DP(Advanced Audio Distribution Profile) AVRCP(Audio/Video Remote Control Profile)

1 Multi-function button(MFB)—Pair with the second receiver,

search for memory device, return back to connected mode

2 LED indicator—Status indicator 3 Dock connector—Use it to co nnect to iPod or iPhone

Play stero music Music remote control (remote control

previous track, next track, pause ANDplay)

 Getting started

1. Turning on/of the transmitte r

Function Operation LED indicator

Turning on BTT014

Turning off BTT014

Remark: Please operate your iPod or iPhone if the transmitter can not be turned on.

2. Pairing with Bluetooth receivers

You can enjoy music wirelessly after pairing and connecting the transmitter to Bluetooth receivers. Before pairing, please make sure your Bluetooth receivers support A2 DP profile. The general pairing steps are as follows:

Pairing with the first Bluetooth receiver

1) Keep the transmitter and your stereo Bluetooth receiver within 5 meters;

2) Enter your Bluetooth receiver’s pairing mode;

3) Plug the transmitter into iPod or iPhone and turn on the iPod or iPhone;

4) The transmitter will automatically search for and connect with your

Bluetooth receiver;

5) After successful conn ecting, the blue LED will flash slow ly. AT this time,

the iPod or iPhone will automatically play music, you can also operate the iPod or iPhone to play music.

Remarks:

 The transmitter can only pair with stereo Bluetooth receivers whose Pin

Nos are “0000

 The pairing mode will last 1.5 minutes. If no devices can be connected to

the transmitter within 1.5 minutes, it will automatically enter standby mode. If no devices can be connected to the transmitter within 5 minutes, it will automatically turn off.

 Every time BTT014 is turned on, it will automatically connect to last

connected receiver. If you want to pair it with other devices, please turn off the receiver current paired with BTT014 and then pair BTT014 with a new device.

Plug BTT014 into the iPod or iPhone, it will automatically turn on Pull out BTT014 from the iPod or iPhone, it will automatically turn off

”, “1234”, “1111” or “8888”.

Blue LED flashes quickly

Blue LED is off

+ 4 hidden pages