Zhongshan K mate General Electronics BTS028 User Manual
BTS028
Bluetooth stereo speaker
User’s manual
Contents
Brief introduction…………...…………………………..…....1
1. Bluetooth wireless communication technology
2. About BTS028
…………………………………………………...1
……………….…....1
Before use……………………………………………………..2
1. Overview
2. Charging for speaker.
Getting started……..…………………………………………3
1. Turning on/off the speaker..
2. Pairing speaker with Bluetooth devices
1) How to enter pairing mode
2) Pairing speaker with Bluetooth cell phone
3) Pairing speaker with Bluetooth transmitter
3. Reconnecting the speaker with devices
4. Making a call with the speaker
5. Playing music
6. LED indicator
7. Indication tone
8. Factory Reset
Care and maintenance……………………………..…..……..9
FAQs……………………………………...…………………..10
Specification……………………………...………………..…11
…………………………………………………...……2
………………….…………………………3
…………....……………………......3
…….…………………..….3
………………….………………….3
…………………..….4
………….………....5
…………………………....5
……………...…………………….6
……………………………………………….…...8
…………………………………………………..8
……………………………………………….….9
……………………………………………..…..….9
Welcome to use this Bluetooth stereo speaker, BTS028. Please read this
user’s manual carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range wireless communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate among
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission
ranges of class I can reach up to 100 meters.
2. About BTS028
BTS028 is a Bluetooth stereo speaker. It supports the following Bluetooth
profiles:
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can enjoy music wirelessly by using BTS028. It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
Answer a call, end a call and reject a call
Redial last number
Voice dial
Adjust the volume
Call transfer between the speaker and your Bluetooth cell phone
Microphone mute
2) Pairing with a Bluetooth cell phone or Bluetooth transmitter supporting
A2DP profile.
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track
Remote control fast forward/rewind
3) Easy to switch between the call and music, you will not miss the
incoming call during listening to music.
1
4) Every time the speaker is turned on, it will connect to last connected
device automatically.
Note: In order to complete above function, the Bluetooth profiles of paired
device must be same as the speaker. And even though the paired device and
the speaker support the same Bluetooth profiles, functions may vary due to
specification differences of the paired devices.
Before use
1.
Overview
1 Built-in microphone 7 Volume up
2 LED indicator 8 ► button: next song/fast
3 Left speaker 9 Volume down
4 Right speaker 10 ON/OFF button: power
5 ◄button: previous song/
fast rewind
6 button: Multi-functions
button(MFB)
forward
switch
11 Charging jack
12 Aux-in jack
2
2. Charging for speaker
The speaker comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the speaker is low power, the speaker emits a string of warning tones
every 1 minutes and the red LED flashes. Please recharge the battery of the
speaker.
The way of charging as following:
Using USB cable
1. Plug the USB cable into the USB port of PC
2. Plug another side of cable into the charging jack of speaker
Red light on: Charging
Red light off: Finish charging
3. It will takes about 3 hours to finfish charging
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
1. Turning on/off the speaker
Turning on Make the power
Turning off Make the power
2. Pairing the speaker with Bluetooth devices
1) How to enter pairing mode
Functions Operation LED indicator
Entering
pairing
mode
excessive heat place, such as sunshine, fire or the like.
Getting started
Functions Operation LED indicator Prompt tone
switch to ON
switch to OFF
Ensure the speaker is on,
otherwise please turn it on first.
And then long press button
about 4~6 seconds until red and
blue LED flash alternately
Blue LED on
one second
Red LED on
one second
3
4 raise tones
4 fall tones
Red and blue LED
flash alternately
Loading...