Zhongshan K mate General Electronics BTR006L Users Manual

BTR006L

Bluetooth audio receiver

User’s manual

Content

 Before use…………………………………………………...…1

1. About BTR006L………………………………………...…….1

2. System requirements………………………………...…………1

3. Overview of BTR006L………………………………...……...1

 Getting started…………………….……………………………2

1. Charging the receiver………………..………………………....2

2. Turning on/off the receiver………..…………………………...2

3. Pairing with Bluetooth devices…………..………………….…3

4. Music playback…………..…………………………………….5

5. LED indicator…………..……………………………………...5

 Care and maintenance………….………………………………6  FAQs…………………………………..……………………….6  Specifications……………………...…………………………...7  FCC Statement……………………...………………………….8

Welcome to use this Bluetooth stereo receiver BTR006L. Please read this user’s manual carefully before use.

 Before use

1. About BTR006L

BTR006L is a stereo Bluetooth receiver. You can use a common audio device with 3.5mm audio in jack for playing any stereo Bluetooth-enabled device’s music after plugging in BTR006L.

The product comes with a built-in rechargeable batte ry, it can be used for about 14 hours after being charged fully.

2. System requirements

Audio device with 3.5mm audio input jack, such as speakers, radios etc .

 

Bluetooth transmitting device supporting A2DP profile, such as Bluetooth mobile phones, Bluetooth MP3 etc.

3. Overview of BTR006L

1 MFB button — Power on/off, pair, music pause/play 2 Charging jack — DC 5V 3 LED indicator — Indicate current status 4 3.5mm audio input jack — Connect to audio device

 Getting started

1. Charging the receiver

First time charging:

Please charge the battery fully before first use the receiver.

Low battery：

When you see the red LED flashed once every 20 seconds and hear three Tones during use, the battery is low battery and needs to be charged.

1. Plug charger or charging cable into the standard AC power socket

2. Plug other end of charger or charging cable i nto charging port of receiver

RED light on→Charging RED light off→Finished charging

3. It will take about 3 hours to finish charging

4. If the receiver can’t be turned off, you can charge it to turn it off.

Remarks:

Please don’t atte mpt to take out the batt e r y from the speaker, as this might damage it.

Warning:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

2. Turning on/off the receiver

excessive heat place, such as sunshine, fire or the like.

Function Operation LED indicator

Turning on Press and hold MFB button for

3～5 seconds

Turning o ff Press and hold MFB button for

3～5 seconds

Blue LED is on for 1 secon Red LED is on for 1 secon

3. Pairing with Bluetooth devices

How to enter pairing mode

Function Operation LED indicator

Entering pairing mode

Ensure the receiver is turned off, otherwise tur n it of f firs t and then press and hold MFB

red and blue LED flashes alternately

button for 6～7 seconds until red and blue LED flash es

alternatel Remark: The pairing mode will last 2 minutes, the receiver BTR006L will switch to standby mode automatically if no devices can be connected within 2 minutes.

Pairing with Bluetooth mobile phone

Ensure your mobile phone supports A2DP profile. The pairing procedures will vary depending on different models of mobile phones. Please refer to your mobile phone user’s manual for further information. The general pairing procedures are as follows:

1) Place the receiver and Bluetooth mobile phone where they are easily

viewable by no more than 1 meter apart;

2) Enter th e receiver’s pairing mode (please refer t o “How to enter pairing

mode);

3) Activate your mobile phone’s Bluetooth function and set your mobile

phone to search for Bluetooth devices within range, and select “BTR006L” from the list of devices shown;

4) According to the indication, enter password or PIN No: “0000”;

5) If prompted by your mobile phone to connect, select “Yes” (This will

vary among mobile phone models);

6) After successful connecting, blue LED of receiver flashes twice quickly

every 4 seconds

Remarks:

 If no devices can be connected within 5 minutes, the receiver will turn

off automatically in order to save power.

 After successful pairing, the receiver and the mobile phone will

remember each other, they will no need to re-pair next time.

 Every time the receiver is turned on, it will automaticall y connect to last

connected device. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the receiver with the new device according to steps 1～6 m entioned above.

 When the receiver is turned on and doesn’t connect to any devices, press

MFB button twice, it will automatically connect to the last connected device.

 When the receiver and the mobile phone are o ut of effective range to

disconnected, they can connect to each other automatically once going back to effective range.

 If the Bluetooth version of your mobile phone is V2.1 or above, it will no

need to enter PIN No. when the receiver pairs with the mobile phone.

Pairing with Bluetooth transmitter

You can connect the receiver with a Blue tooth transmitter to enjoy music wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example. The pairing procedures are as follows:

1) Keep the receiver and transmitter within

1 meter when pairing;

2) Make the receiver enter pairing mode

(Please refer to “How to enter pairing mode);

3) Turn on the Bluetooth transmitter and

make it enter pairing mode. It will search for Bluetooth devices automatically and send a pairing reque st;

4) When the receiver requests to enter a PIN No., the transmitter will

response “0000” automatically;

5) After successful pairing and connecting, blue LED of the receiver flashes

twice every 4 seconds.

Remarks:

 The pairing password of the receiv er is “0000”. So , the receive r can only

pair with a Bluetooth transmitter whose pairing password is “0000”.

 If pairing still fails after several tries, please refer to the Bluetooth

transmitter’s user’s manual for further information.

4. Music playback

Connect BTR006L to a speaker and a Bluetooth music device at the same time, now you can enjoy music wirelessly.

Function Status of BTR006L Operation

Pause Playing music Short press MFB button

once

Play Pausing Short press MFB button

once

Remarks:

 The music will automatically pause when you dial a phone number or

there is an incoming call.

 BTR006L hasn’t a microphone, so you need to switch the call to the

mobile phone. The music will automatically play when the call is ended.

5. LED indicator

LED indicator Status of BTR006L

Red and blue LED flashes alternatel Blue LED flashes once every 2 seconds Blue LED flashes twice every 4 seconds Blue LED flashes twice every

Pairing mode Standby mode and not connected

with device Fail to pair and connect with device, back to standb

mode

Connected with device 4 seconds Red LED flashes once every

Low battery 20 seconds

 Care and maintenance

Read the following recommendation s before using the receiver. Following these you will be able to e njoy the product for m an y ye ar s .

 Do not expose the receiver to liquid, moisture or humidity to avoid the

product’ s internal circuit being affected.

 Don’t use abrasive cleaning solvents to clean the receiver.  Do not expose the receiver to extremely high or low temperature as this

will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.

 Don’t dispose of the receiver in a fire as it will result in an explosion.  Don’t bring the receiver into contact with sharp objects as this will cause

scratches and damages.

 Don’t let the receiver fall down onto the floor. The internal circuit might

get damaged.

 Don’t attempt to disassemble the receiver as it may get damaged if you

are not professional.

 If you do not plan to use the receiver for a long time, please store it in a

dry place that is free from extreme temperatures and dust.

In case the receiver doesn’t function properly, send it to the store you bought it. The staff will help y ou to solve the problem.

 FAQ s

1. What to do when BTR006L can’t be turned on?

Please charge the BTR006L.

2. What to do when BTR006L can’t pair and connect to a Bluetooth

device?

a) Make sure the Bluetooth de vice is placed within 1 meters; b) Ensure BTR006L has entered pairing mode.

3. What to do when BTR006L can’t be turned off?

Please charge the BTR006L for about 2 seconds .

+ 1 hidden pages