Zhongshan K mate General Electronics BTR006 Users Manual

BTR006

Bluetooth stereo receiver

User’s manual

 Before use…………………………………………………………1

1. About BTR006…………………………………………………….1

2. System requirements……………………………………… ………1

3. Overview of BTR006……………………………………………...1
 Getting started……………………………………………………2

1. Charging the receiver……………………………………………....2

2. Turning on/off the receiver………………………………………...2

3. Pairing with Bluetooth devices……………………… ………….…3

4. Music playback……………………………………………… …….5

5. LED indicator……………………………………………………...5

 Care and maintenance……………………………………………6
 FAQs……………………………………………………………….6
 Specifications……………………………………………………...7

y

Welcome to use this Bluetooth stereo receiver BTR006. Please read this
user’s manual carefully before use.

 Before use

1. About BTR006

BTR006 is a stereo Bluetooth receiver. You can use an common audio
device with 3.5mm audio in jack for playing back any stereo
Bluetooth-enabled device’s music after plugging in BTR006.

The product comes with a built-in rechargeable battery, it can be usded for
about 12 hours after being charged fully.

2. System requirements

 Audio device with 3.5mm audio in jack, such as speakers, radios etc .
 Bluetooth transmitting device supporting A2DP profile, such as

Bluetooth mobile phones, Bluetooth MP3s etc.

3. Overview of BTR006

1 MFB button —Power on/off,pair, music pause/pla
2 Charging jack —DC 5V
3 LED indicator —Indicate current status
4 3.5mm audio in plug —Connect to audio device

1

d

d

 Getting started

1. Charging the receiver

BTR006 comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the receiver is low power, red LED flashes once and the receiver
emits three tones every 20 seconds. Please recharge the battery of the
receiver.

Connect the charger to a standard power outlet and the charger plug to the
charging jack of the receiver. Red LED is on while charging. It takes about

2.5 hours to charge the battery fully. When charging has completed, red
LED will be off.

Remarks:

1) If the receiver can’t be turned off, you can charge it to turn it off.

2) Please don’t attempt to take out the battery from the speaker, as this

might damage it.

Warning:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

2. Turning on/off the receiver

Function Operation LED indicator

Power on Press and hold MFBbutton for
Power off Press and hold MFBbutton for

3～5 seconds
3～5 seconds

2

Blue LED is on
for 1 secon
Red LED is on for
1 secon