BTH109R
True Wireless Bluetooth Headset
User’s manual
Contents
◼ Brief introduction…………...…………………………..…... 1
◼ Before use……………………………………………………. 1
1. Overview…………………………………………………...……1
2. Charging for headset..……………………………………………2
◼ Getting started……..…………………………………………3
1. Wearing headset............................................................ .........3
2. Use one piece earbuds...............................................................3
3. Use two earbuds..........................................................................4
4. Two earbuds connecting........................................................5
5. Operation....................................................................................6
6. Battery display....................................................................... ......10
7. Prompt tone.......…………………………………………….....10
8. Factory Reset………………………....……………………..…..11
◼ Care and maintenance……………………………..……….12
◼ FAQs……………………………………...…………………..12
◼ Specification……………………………...………………..…13
Welcome to use this True Wireless Bluetooth headset, BTH109R. Please
read this user’s manual carefully before use.
◼ Brief introduction
BTH109R is a True Wireless Bluetooth Headset without any wire,each piece
comes with one Mic that can be used individually or be used together for
stereo sound.The headset support music and calling function.
◼ Before use
1. Overview
1
Four different size ear tips
2. Charging for headset
When the headset is battery low, the headset emits “Battery low” every 2
minutes and the red LED slowly flash four times every minutes. Please
recharge the battery of the headset.
The way of charging as following:
Using USB cable
1. Plug the USB charging cable to headset charging jack
2. Plug another side of cable to the USB port of PC
Red light on: Charging
Red light off: Finish charging
3. It will takes about 1.5 hours to finish charging
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
2
◼ Getting started
1. Wearing headset
a. Choose the suitable size of ear tips
b. Wear the headset of L and R accordingly,adjust each earbuds for your ear
to get best experience
Left ear Right ear
2.Use one earbud
In this mode, only one earbud of the headset connecting with device.
1) Power on
Press power button about 3s and release it till blue LED on, and earbud
prompt “Power on”.
2) Pairing
Power off mode:Press power button about 5s, release it
till red and blue LED flash alternately, earbud will
prompt “Pairing”.
3) Connecting
a. Make sure the earbud in pairing mode.
b. Turn on the Bluetooth function of cellphone, search the Bluetooth name
of earbud and connect it.
Bluetooth name of earbud : BTH109R-L for left earbud, BTH109R-R for
right earbud.
3