Zhongshan K mate General Electronics BTH109R, BTH109L User Manual

True Wireless Bluetooth Headset
BTH109
User’s manual
Contents
 Brief introduction…………...…………………………..…... 1  Before use……………………………………………………. 1
2. Charging for headset..……………………………………………2
Getting started……..…………………………………………3
1. Wearing headset............................................................ .........3
2. Use one piece earbuds...............................................................3
3. Use two earbuds..........................................................................4
4. Earbuds pairing/connecting........................................................5
5. Function operation-one earbuds connecting with cellphone......6
6. Function operation-two earbuds connecting with cellphone......8
7. Battery display........................................................................ ......8
8. LED indicator……………………………………………….....9
9. Factory Reset………………………………………………..…..9
Care and maintenance……………………………..……….10 FAQs……………………………………...…………………..10 Specification……………………………...………………..…11
1
MFB touch-button
5
LED indicator
2
Microphone
6
Power on/off button
3
Ear tips
7
Four different size ear tips
4
Charging jack
Welcome to use this True Wireless Bluetooth headset, BTH109. Please read this user’s manual carefully before use.
Brief introduction
BTH109 is a True Wireless Bluetooth Headset without any wire,each piece comes with one Mic that can be used individually or be used together for stereo sound.The headset support music and calling function.
Before use
1. Overview
2. Charging for headset
When the headset is low power, the headset emits warning sound every 30s and the red LED flashes instead of blue LED Please recharge the battery of the headset.
The way of charging as following:
Using USB cable
1. Plug the USB charging cable to headset charging jack
2. Plug another side of cable to the USB port of PC
1
Red light on: Charging Red light off: Finish charging
3. It will takes about 2 hours to finish charging
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
Getting started
1. Wearing headset
a. Choose the suitable size ear tips b. Wear the headset of L and R channel accordingly,adjust each earbuds for your ear to get best experience
2.Use one piece earbuds
In this mode one earbuds of headset connecting with device.
1.Power on:Press power key about 2s and release it till bluet LED on,and earbuds prompt “Power on”.
2.Pairing: a.Power off mode:Press power key about 5s and release it till red LED and blue LED flash alternately,and earbuds prompt “Pairing” b.Standby mode without connecting:Press power key about 2s and release it till red LED and blue LED flash alternately,and earbuds prompt”Pairing”.
3.Connecting
Make sure the earbuds in pairing mode,find the Bluetooth name from search list and click it. Bluetooth name : BTH109L is left earbuds,BTH109R is right earbuds
2
Loading...
+ 9 hidden pages