Zhongshan K mate General Electronics BTH108Q User Manual

BTH108Q
True Wireless Bluetooth Headset
User’s manual
Contents
Brief introduction…………...…………………………..…... 1 Before use……………………………………………………. 1
1. Overview…………………………………………………...……1
2. Charging for headset..……………………………………………2
2. Charging for charging case..…………………………………2
Getting started……..…………………………………………3
2. One earbud connecting with cellphone......................................3
3. Two earbuds connecting with cellphone..........................................5
4. Earbuds pairing/connecting........................................................6
5. Function operation-use one earbud ....................................6
6. Function operation-use two earbuds ....................................8
9. Factory Reset……………………………………………..…..….9
Care and maintenance……………………………..……….10 FAQs……………………………………...…………………..11 Specification……………………………...………………..…11
Welcome to use this True Wireless Bluetoothheadset, BTH108Q. Please read this user’s manual carefully before use.
Brief introduction BTH108Q is a True Wireless Bluetooth Headset ,each ear piece comes with a Microphone that can be used individually or used together for stereo sound.The earbuds supports music and calling function,as well as touch sensitive playback and pause control.
Before use
1. Overview
1
1
MFB touch-button
6
Top case
2
LED indicator (blue)
7
Charging pins
3
Microphone
8
Charging indicator light
4
LED indicator (red)
9
Charging jack
5
Charging metal contact
10
Big/medium/small Ear tips
2. Charging for headset
When the headset is low on power, it emits “Battery lowonce every 2 minutes andthered Ledflashes slowly 4 times in a row every 1 minute . Please recharge the battery of the headset.
The way of charging for the earbuds as following:
1. Put the earbuds into the charging case to ensure that the charging pins
connect well, and start charging when you see the red indicator light of the earbuds on.
Red light on: Charging Red light off: Finish charging
2. Charging should be completed in roughly 1.5 hours.
Remarks:
The left and right earbuds on charging case of an arbitrary charge can be
charged.
Please cover the charging case cover, so that the earbuds and the
charging case connect well when it is charging.
When the earbudsare not put into charge case, the indicator light of
charging case is off. When the earbudsare put into charging case, the white indicator light of the charging case will light up and indicate the
power of the current charging case: White LED flashes once every 2 seconds = low battery power; White LED flashes three times every 2 seconds = sufficient battery power; White LED remains on = full battery power; After removing the earbuds from the charging case, the indicator LED of the charging case will automatically extinguish after 1 minute.
3. Charging for charging case When you put the earbuds into the charging case and find that the white indicator light flashes once every 2 seconds, it means that the battery level of the charging case is low. In addition the indicator light of the charging
case is off and it cannot charge the earbuds, it means that the battery of the charging case has been exhausted.You need to charge the charging case:
The way of charging for the charging case as following:
Using USB cable
1) Plug the micro USB charging cable into the cases charging jack.
2) Plug the USB cable into a USB port of PC or a 5Volt USB charge.
Red light on: Charging
Red light off: Finish charging
3) Charging should be completed in roughly 1.5 hours. 4If the earbuds are in the charging case, it can charge the earbuds while charging the charging case.
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
3) Please make sure the charging jack is dry before charge.
2
Loading...
+ 11 hidden pages