Zhongshan K mate General Electronics BTH070 User Manual

BTH070N

Bluetooth stereo headset

User’s manual

Contents

 Brief introduction…………...…………………………..…....1

 Before use……………………………………………………..1

1. Overview

…………………………………………………...……1

2. Charging for headset..……………………………………………2

 Getting started……..…………………………………………3

1. Turning on/o ff the headset

…………....……………………......3

2. Wearing the headset.......................................................................3

3. Pairing/Connecting…….…….............................……………..….5

1) Pairing headset with Bluetooth cell phone via Bluetooth

……..….5

2)Pairing headset with Bluetooth transmitter via Bluetooth..............6

3) Pairing headset with Blue tooth cell phone via NFC......................7

4) Pairing headset with multi devices via Bluetooth

….............…....8

4.Battery display...........................................................................................8

5.5. Making a call with the headset……………………………...….9

6. P laying music

…………………………………………….…...11

7. LED indicator………………………………………………....12

8. Factory Reset ………………………………………………..….12



Care and maintenance……………………………..………..12

 FAQs……………………………………...…………………..13

 Specification……………………………...………………..…13

Welcome to use this Bluetooth stereo headset, BTH070N. Please read this

user’s manual carefully before use.

 Brief introduction

BTH070N is a comfortable and fashion music Bluetooth headset. Nice

necklace design as well as magnet on main body and earbuds are well for

easy carrying or wearing. BTH070N can be used on various environments

because it have passed IPX4-rated sweat-proof. The headset will vibrate

when receivers an incoming call for built-in vibrator so all calling wont be

missing. You can use it to enjoy wireless music and make a call at the same

time.

 Before use

1.

Overview

1

2. Charging for headset

The headset comes with a built-in rechargeable battery, prior to using it, it is

recommended to charge the battery fully for the first time.

When the headset is low power, the headset emits “Battery low” every 5

minutes and the red LED flashes. Please recharge the battery of the headset.

The way of charging as following:

Using USB cable

1. Turn on the cover of charging jack, and plug the USB charging cable

2. Plug another side of cable to the USB port of PC

The headset emits”Charging

Red light on: Charging

Red light off: Finish charging

3. It will takes about 1.5 hours to finish charging

Remarks:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed)

shall not be exposed to excessive heat place,

such as sunshine, fire or the like.

2

1

Right ear plug

6

: MFB button

2

Left ear plug

7

NFC zone

3

Magnet button

8

USB charging jack

4

:volume up/previous song

9

Microphone /LED

5

: volume down/next song

 Getting started

1. Turning on/off the headset

Functions

Operation

Prompt tone

Turning on

Press and hold about 2.5
seconds until blue LED flashes

Power on

Turning off

Press and hold about 2
seconds until red LED flashes

Power off

Remark: In order to save power, the headset will turn off automatically if

no devices can be connected after long time.

2. Wearing the headset

A.Choose the suitable size earbud according to your ears.

B .Put the headset on your neck and absorb the magnet button,then wear the

Right/Left ear plugs.As below picture shows:

According to above methods adsorption the two magnetic buckle together ,

if feeling not strong enough, can as following way to dislocation two

magnetic buckle , adsorption force will be stronger, and wearing also more

stable.

3