Zhongshan K mate General Electronics BTH058 Users Manual
BTH058
Bluetooth stereo headset
User’s manual
Contents
Brief introduction…………...…………………………..…....1
1. Bluetooth wireless c ommunication techn ology……………….…....1
2. About BTH058………………………………………………...1
Before use……………………………………………………..2
1. Overview…………………………………………………...……2
2. Charging for Headsets……………………………………………3
Getting started……..…………………………………………3
1. Turning on/off the headsets………………………………….......3
2. Pairing headsets with Bluetooth devices………………………..….4
1) How to enter pairing mode………………….………………….4
2) Pairing headsets with a Bluetooth cell phone………………..….4
3) Pairing headsets with a Bluetooth t ransmitter………………....5
4) Pairing headsets with Multi-devices…………………………….5
3. Wearing the headset.......................................................................6
4. Reconnecting with a Bluetooth device.......………………....……....7
5. Making calls with the headset…………………………………….7
6. Playing music…………………………………………….…...10
7. LED indicator…………………………………………………..10
8. Indication t one………………………………………………….11
9. Factory Reset………………………………………………..….11
Care and maintenance……………………………..………..12
FAQs……………………………………...…………………..12
Specification……………………………...………………..…13
Welcome to use this Bl uetooth stereo headset , BTH058. Please read this
user’s manual carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range wireless communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate among
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission
ranges of class I can reach up to 100 meters.
2. About BTH058
BTH058 is a Bluetooth stereo headset. Foldable and retractable design is
very easy to take with you. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Vi deo Remote Control Profile
You can enjoy music wirelessly by using BTH058. It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
Answer a call, end a call and reject a call
Redial last number
Voice dial
Adjust the volume
Cal l transfer between the headset and your Bluetooth cell phone
Microphone mute
2) Pairing with a Bluetooth cell phone or Bluetooth transmitter supporting
A2DP profile.
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track
1
3) Easy t o switch between the call and music, you will not miss the
incoming call during listening to music.
4) Every time the headset is turned on, it will connect to last connected
device automatically.
Note: In order to complete above function, the Bluetooth profiles of paired
device must be same as the headset. And even t hough the paired device and
the headset support the same Bluetooth profiles, functions may vary due to
specification differences of the paired devices.
Before use
1. Overview
1 Left speaker 6 Charging jack
2 Right speaker 7 LED indicator
3 Volume up/previous song 8 Line-in jack
4 Volume down/next song 9 Built-in microphone
5 Multi-function button(MFB)
2
2. Charging the headset
Turning
on
Press and hold
MFB
button
LED flashes
B
lue light on one
Turning
off Press and hold
MFB
button
flashes
Red light on one
The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, the headset emits five “Dong” tones every 5
minutes and the red LED flashes. Please recharge the battery of the headset.
The way of charging as following:
Using USB cable
1. Plug USB charging cable into the USB port of computer
2. Plug another side of USB cable to headset
Red light on: Charging
Red light off: Finish charging
3. It will takes about 3 hours to finish charging
Remarks:
1) The batte ry is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
Getting started
1. Turning on/off the headset
Functions Operation LED indicator
Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.
excessive heat place, such as sunshine, fire or the like.
about 4 seconds until blue
about 4 seconds until red LED
second
second
3
Loading...