Zhongshan K mate General Electronics BTH023 User Manual
BTH023
Bluetooth stereo headset
User’s manual
Contents
Brief introduction…………...…………………………..…....1
1. Bluetooth wireless communication technology……………….…....1
2. About BTH023
…………………………………………………...1
Before use……………………………………………………..2
1. Overview…………………………………………………...……2
2. Charging for Headset..……………………………………………3
Getting started……..…………………………………………3
1. Turning on/off the headset…………....………………………......3
2. Pairing headset with Bluetooth devices…….…………………..….4
1) How to enter pairing mode
2) Pairing headset with Bluetooth cell phone
3) Pairing headset with Bluetooth transmitter
4) Pairing headset with Multi-devices
3. Reconnecting the headsets with devices
4. Making a call with the headset
5. Playing music
6. LED indicator
7. Indication tone
8. Factory Reset………………………………………………..….10
……………………………………………….…...9
…………………………………………………..9
………………………………………………….10
………………….………………….4
…………………..….4
………..…………....5
………….………………….5
………………………....6
………………………………….6
Care and maintenance……………………………..………..10
FAQs……………………………………...…………………..11
Specification……………………………...………………..…12
Welcome to use this Bluetooth stereo headset, BTH023. Please read this
user’s manual carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range wireless communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate among
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission
ranges of class I can reach up to 100 meters.
2. About BTH023
BTH023 is a Bluetooth stereo headset. It supports the following Bluetooth
profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can enjoy music wirelessly by using BTH023. It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
Answer a call, end a call and reject a call
Redial last number
Voice dial
Adjust the volume
Call transfer between the headset and your Bluetooth cell phone
Microphone mute
2) Pairing with a Bluetooth cell phone or Bluetooth transmitter supporting
A2DP profile.
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track
1
3) Easy to switch between the call and music, you will not miss the
incoming call during listening to music.
4) Every time the headset is turned on, it will connect to last connected
device automatically.
Note: In order to complete above function, the Bluetooth profiles of paired
device must be same as the headset. And even though the paired device and
the headset support the same Bluetooth profiles, functions may vary due to
specification differences of the paired devices.
Before use
1.
Overview
1 LED indicator 5 Multi-functions button(MFB):
2 Charging jack 6 Volume down/next song
3 Built-in microphone 7 Right speaker
4 Volume up/last song 8 Left speaker
pause /play
2
2. Charging for headset
b
b
The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, the headset emits five “Dong” tones every 5
minutes and the red LED flashes instead of blue LED. Please recharge the
battery of the headset.
The way of charging as following:
Using USB cable
1. Plug the special charging clip into the
charging jack of headset, make it clip the
headset as pictures shown :
2. Plug another side of cable to the USB port
of PC
Red light on: Charging
Red light off: Finish charging
3. It will takes about 2 hours to finfish
charging
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
Getting started
1. Turning on/off the headset
Functions Operation LED indicator
Turning on Press and hold MFB
Turning off Press and hold MFB
Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.
excessive heat place, such as sunshine, fire or the like.
about 4 seconds until blue
LED flashes
about 4 seconds until red LED
flashes
utton
utton
Blue LED on one
second
Red LED on one
second
3
Loading...