Zhongshan K mate General Electronics BTH022 Users Manual

BTH022

Bluetooth stereo headset

User’s manual

 Brief introduction……………………………………..….1

1. Bluetooth wireless communication technology…...……………......1

2. About BTH022………………………………..…….………….…..1

 Before use………………………………………….……...2

1. Overview……………………………..………………..…………...2

2. Charging the headset………………………….………………....…3

 Getting started.……………………………….…………..3

1. Turning on/off the headset……………….……….……………...…3

2. Pairing the headset with Bluetooth devices…………………..….....4

How to enter pairing mode……………………..……………….....4

Pairing the headset with a Bluetooth cell phone…...............….......4

Pairing the headset with a Bluetooth tra nsmitter..………………....5

Multi-pairing………………………………………………….…....6

3. Re-connecting with a Bluetooth device………………………...…..6

4. 3.5mm audio out function...…………………………………….…..7

5. Making a call with the headset…………………………..………....8

6. Music playback………………………………………..……….…...9

7. LED indicator…………………………………………….………..10

8. Indication tone………………………...………………..…...…..…11

 Care and maintenance…………………………….….…11
 FAQs………………………………………………..….…12

 Specifications………………………………….....……....13

Welcome to use this Bluetooth stereo headset with clip, BTH022. Please
read this user’s manual carefully before use.

 Brief introduction

1. Bluetooth wireless communication technology

Bluetooth is a standard of close range wirel ess communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate amon g
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission range
of class I can reach up to 100 meters.

2. About BTH022

BTH022 is a Bluetooth stereo headset with cli p. It supports the following
Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile

You can enjoy music wirelessly by using BTH022. It has the following
features:

1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.

 Answer a call, end a call and reject a call
 Redial last number
 Voice dial
 Adjust the volume
 Call transfer between the BTH022 and your Bluetooth cell phone
 Microphone mute

2) Pairing with a Bluetooth music device or Bluetooth transmitter
supporting A2DP profile.

 Enjoy music wireless ly
 Adjust the volume
 Remote control pause/play
 Remote control previou s/next track

3) Easy to switch between the call and music, you will not miss the

incoming call during listening to music.

1

4) Every time the headset is tured on, it will automatically connect to last

connected device.
Note: Even though the paired device and the headset support the same

Bluetooth profiles, functions may vary due to sp ecification differences of
the paired devices.

 Before use

1. Overview

1 LED indicator
2 Volu me up
3 Volume down

Multi-function button (MFB): Power on/power off/answer

4

a call/end a call/reject a call/microphone mute/call
transfer/redial last number/pause/play

5 Previous track
6 Next track
7 Built-in microphone
8 3.5mm audio out jack and charging jack
9 Clip

2

2. Charging the headset

The headset BTH022 comes with a built-in rechargeable battery, prior to
using it, it is recommended to charge the battery fully for the first time.
When the headset is low power, red LED flashes twice and the headset emits
three “Dong” tones every 20 seconds. Please recharge the battery of the
headset.

Connect the USB cable to an computer USB port and the USB cable plug to
the charging jack of the headset. Red LED is on while charging. It takes
about 2 hours to charge the battery fully. When charging has completed, red
LED will be off.

Remarks:

1) The battery is recycled.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

 Getting started

1. T u rning on/off the headset

Function Operation LED indicator

Turning on Press and hold MFB button for

Turning off Press and hold MFB button for

Remark: If the pairing can not be completed within 5 minutes, the headset
will then turn off automatically in order to save power.

2. Pairing the headset with Bluetooth devices
How to enter pairing mode

Function Operation LED

3～4 seconds until blue LED is
on

3～4 seconds until red LED is
on

3

Blue LED is on
for 1 second

Red LED is on for
1 second

indicator

Entering
pairing
mode

Remark: Pairing mode will last 2 minutes. If the headset still can’t pair with
any Bluetooth devices after 2 minutes, it will return to standby mode
automatically.

Pairing the headset with a Bluetooth cell phone

Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing pr ocedures will vary depending
on different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:

1) Place the headset and Bluetooth cell phone where they are easily

viewable by no more than 1 m e ter apart;

2) Enter the headset’s pairing mode (please refer to “How to enter pairing

mode);

3) Activate your cell phone’s Bluetooth function and set your cell phone to

search for Bluetooth devices within range, and select “BTH022” from the
list of devices shown;

4) According to the indication, enter password or PIN No: “0000”;

5) If prompted by your cell phone to connect, select “Yes” (this will vary

among cell phone models);

6) Go back to you r cell phone’s main menu. For certain cell phone models,

a headset icon will be shown on the screen.

You should now be able to m a ke and receive a call using the headset.

Remarks:

 If pairing is failed, please turn off the headset first and then re-pair

according to steps 1～6 mention ed above.

 After pairing is successful, the headset and the cell phone will remember

each other, they will no need to re-pair next time. The headset can
remember 8 paired devices, When the number of paired devices exceeds
8, the first one will be replaced.

 Every time the headset is turned on, it will connect to last connected

Ensure the headset is turned off,
otherwise turn it off first and then
press and hold MFB button for 6～7
seconds until LED flashes red and
blue alternately

4

LED
flashes red
and blue
alternately