Zhongshan K mate General Electronics BTH015 Users Manual

BTH015

Bluetooth stereo headset

User’s manual

 Brief introduction………………………………….…………...…1

1. Bluetooth wireless communication technology…...………….….....1

2. About BTH015………………………………..…….………….…..1

 Before use…………………………………………………...……..2

1. Overview……………………………..………………..…………...2

2. Charging the headset………………………….………………....…3

 Getting started.……………………………….………….………..3

1. Turning on/off the headset……………….……….……………...…3

2. Pairing the headset with Bluetooth devices…………………..….....4

How to enter pairing mode……………………..……………….....4

Pairing the headset with a Bluetooth cell phone…...............…........4

Pairing the headset with a Bluetooth tra nsmitter..………………....5

Multi-pairing………………………………………………….…....6

3. Re-connecting with a Bluetooth device………………………...…..6

4. Wearing the headset…………………………………………….…..7

5. Making a call with the headset…………………………..………....7

6. Music playback………………………………………..……….…...9

7. LED indicator…………………………………………….………..10

8. Indication tone………………………...………………..…...…..…11

 Care and maintenance……………………..……………….….…11
 FAQs…………………………………………………..……..….…11

 Specifications……………………………………..…….....……....13

Contents

Welcome to use this Bluetooth stereo headset, BTH015. Please read this
user’s manual carefully before use.

 Brief introduction

1. Bluetooth wireless communication technology

Bluetooth is a standard of close range wirel ess communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate amon g
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission range
of class I can reach up to 100 meters.

2. About BTH015

BTH015 is a Bluetooth stereo heads et. It ’s foldable and retractable design is
very easy to take with you. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile

You can enjoy music wirelessly by using BTH015. It has the following
features:

1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.

 Answer a call, end a call and reject a call
 Redial last number
 Voice dial
 Adjust the volume
 Call transfer between the headset and your Bluetooth cell phone
 Microphone mute

2) Pairing with a Bluetooth music device or Bluetooth transmitter
supporting A2DP profile.

 Enjoy music wireless ly
 Adjust the volume
 Remote control pause/play
 Remote control previou s/next track

1

3) Easy to switch between the call and music, you will not miss the

incoming call during listening to music.

4) Every time the headset is turned on, it will connect to last connected
device automatically.

Note: Even though the paired device and the headset support the same
Bluetooth profiles, functions may vary due to sp ecification differences of
the paired devices.

 Before use

1. Overview

1 Foldable and retractable headhand
2 + button: Volume up
3 ﹤button: Previous track
4 ﹥button: Next track
5 Built-in microphone
6 LED indicator

Multi-function button (MFB): Power on/power off/answer a

7

call/end a call/reject a call/microphone mute/call transfer/redial
last number/voice dial/pause/play

8 Charging jack
9 – button: V olume down

2

2. Charging the headset

The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, red LED flashes twice and the headset emits
three “Dong” tones every 20 seconds. Please recharge the battery of the
headset.

Connect the USB cable to a computer USB port and the USB cable plug to
the charging jack of the headset. Red LED is on while charging. It takes
about 3 hours to charge the battery fully. When charging has completed, red
LED will be off.

Remarks:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

 Getting started

1. T u rning on/off the headset

Function Operation LED indicator

Power on Press and hold MFB button for

Power off Press and hold MFB button for

Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.

2. Pairing the headset with Bluetooth devices
How to enter pairing mode

Function Operation LED

3～5 seconds until blue LED
flashes

3～5 seconds until red LED
flashes

3

Blue LED is on
for 1 second

Red LED is on for
1 second

indicator