Zhongshan K mate General Electronics BTH008 Users Manual
BTH008
Bluetooth Stereo Headset
User Manual
Brief introduction………………………………………….1
1. Bluetooth wireless communication technology………………..…..1
2. About BTH008…………………………………………………..…..1
Before use………………………………………….……….2
1. Overview……………………………………………………..………...2
2. Charging the battery of BTH008…………………………….……..2
Basic operation……………………………….…………....3
1. Switching on/off BTH008……………………………………….…..3
2. Pairing BTH008 with a Bluetooth cell phone………………...…..…3
3. Re-connecting BTH008 with a Bluetooth device…………………4
4. Wearing BTH008…………………………………………………….4
5. Making calls with BTH008……………………………………..……4
6. Playing music………………………………………………..…………5
7. LED indicator…..…………………………………………….…………6
8. Indication tone……………………………………………...…………..6
Care and maintenance……………………………………6
FAQs………………………………………………………....7
Specifications………………………………………………7
Welcome to use this stereo Bluetooth headset, BTH008. Please read this user manual
carefully before use.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology that was
drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can
achieve the highest transmission rate among cell phones, computers, printers, PDAs and
other devices. The max transmission range of class 2 is 10 meters while the max
transmisson range of class 1 can reach up to 100 meters.
2. About BTH008
BTH008 is a stereo Bluetooth headset. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can enjoy music wirelessly using the BTH008. It has the following features:
1) Pairing with Bluetooth cell phones and PDAs which support HFP.
Answer call, end call and reject call
Redial last call
Voice dial
Adjust the volume
Transfer call between the Bluetooth headset and a Bluetooth cell phone
Microphone mute
2) Pairing with Bluetooth music devices and Bluetooth transmitters which support A2DP.
Enjoy music wirelessly
Adjust the volume
Remote control the function of pause/play
Remote control last/next song
3) Easy to switch between conversation and music, you will not miss incoming calls
while listening to music.
4) Every time BTH008 is turned on, it will connect to the last connected device
automatically.
Note: Even though the paired device and BTH008 support the same Bluetooth profiles,
functions may vary due to specification differences of the paired devices.
Before using
1. Overview
Multi-function button
1
(MFB)
2 Volume+
3 Volume4 Microphone
5 LED indicator
6
7
8 Right loudspeaker
9 Left loudspeaker
10 Charging port
11 Connection cable
Last song
Next song
2. Charging the battery of BTH008
First use—You must charge the battery of BTH008 fully before first use.
Low power—When the red LED flashes and you hear 3 “Dong” tones every 20 seconds,
the BTH008’s battery is low power and needs to be recharged.
The charging steps are as follows:
Step1: Connect charger or charging cable to standard power outlet;
Step2: Connect the end of charger or charging cable to charging port of BTH008;
Step3: The red LED is on while charging. It takes about 2.5 hours to fully charge the
battery;
Step4: When charging is completed, the red LED will switch off.
Remarks:
1) The battery will dry up if you don’t use BTH008 for a long time. If this happens you
have to charge the battery of BTH008 for about 30 minutes before the LED indicator
will be on.
2) Please don’t attempt to take out the battery from BTH008, as this might damage it.
3) If charging via a USB port, this USB port is used only for charging purposes, no
any data is transferred over the USB port.
Warning:
1) The battery is recycled.
2) Do not expose the battery to fire, as this may cause explosion.
Loading...