Zhongshan K mate General Electronics BTH002NI Users Manual

BTH002NI

Bluetooth stereo headset

User’ manual

Content

 Brief introduction………………………………………………….......…1

1. Bluetooth wireless communication technology……………….……...….1

2. About BTH002NI………………………………………..…………....1

 Before using…………………………………...…………………………2

1. Overview……………………………………………………………...….2

2. Charging the headset………………………………………..................…3

 How to use……………………………………..…………………….…..3

1. Turning on/off the headset……………………………………....…….....3

2. Pairing the headset with Bluetooth devices……………………….……..4

How to enter pairing mode…………………………………………….....4

Pairing the headset with Bluetooth mobile phone………………….…….4
Pairing the headset with Bluetooth transmitter……………………..….…5

3. Reconnecting to a Bluetooth device…………...…………………….…..5

4. Wearing the headset…………………………………………...……..…..6

5. Making calls with the headset…………..…………………………..…....6

6. Playing music…………………………………………………………….8

7. Restoring factory defaults and resetting……………………………..…..9

8. LED indicator………………………………………………..................10

9. Indication tone…………………………………………………….…....10

 Care and maintenance………………......…………………..……….….10

 FAQs………………………………………….…………..…….………11

 Specifications……………………………………………....…………...12

Welcome to use this Bluetooth stereo headset, BTH002NI. Please read this
user’s manual carefu lly before using it.

 Brief introduction

1. Bluetooth wireless commu n icat io n technology

Bluetooth is a standard of close range radio-communication technology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth
technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and other devices. The max transmission range of
class II is 10 meters while the max transmission ranges of class I can reach
up to 100 meters.

2. About BTH002NI

BTH002NI is a stereo Bluetooth headset. It supports the following
Bluetooth profiles:
HSP —— Headset Profile
HFP —— Han ds-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile

You can enjoy music wirelessly by using the BTH002NI. Steps a s following:

1) Pairing with the Bluet ooth mobile phone which supports HFP.

 Answer, end and reject call
 Redial last number
 Voice dial
 Adjust the volume
 Switch the conversation between the headset and the mobile phone
 Microphone mute

2) Pairing with Bluetooth music devices and Bluetooth transmitter which
support A2DP

 Enjoy music wirelessl y
 Adjust the volume
 Remote control the func tion of pause/play
 Remote contro l last/next song
 Remote control fast f orward/rewi nd

1

3) Easy to switch between conversation and music, you will not miss the

r

d

g

p

incoming call during listening to music.

4) Automatic connecting with the last paired device when turn on the
headset.

Note: Even though the paired device and headset support the same
Bluetooth profiles, the functions may be different due to the specification
difference of the paired devices.

 Before using

1. Overview

1 Left speaker 7 Next song
2 Right speaker 8 LED indica to
3 Retractable headba n
4 Last son
5 Volume down 11 Built-in microphone

9 MFB button: music pause/play
10 Volume u

6 Charging jack

2

2. Charging the headset

The headset c omes with a bui lt-in rech argeable battery, prior to using it, it is
recomm ende d to cha rge the battery fully for the first time.

When the headset is low power, the headset emits“Dongdong” tones and the
red LED flashes twice every 20 seconds. Please recharge the battery of the
headset.

The way of charging as following:

Using USB cable

1. Plug one side of USB cable into the USB p or t of PC

2. Plug the other side of cable to the charging jack of headset

Red light on: Charging
Red light off: Finish charging

3. It will takes about 1.5 hours to finish charging

Warning:

1) The battery is recyclable.

2) Do not dis pose of the battery in fire, as it may cause exp losion.

 How to use

1. Turning on / off headset

Function Operation LED indicator

Turn ing on Press the MFB button about

4 seconds, and release it till
the blue LED flash

Turn ing off Press the MFB button about

4 seconds, and release it till
the red LED flash

Blue LED is on for 1
second

Red LED is on for 1
second

Note: In order to save power, the headset will automatically turn off if no
devices can be connecte d within 5 minute s after turning on.

3