Zhongshan K mate General Electronics BTH002N Users Manual
BTH002N
Bluetooth stereo headset
User’ guide
Brief introduction
1. Bluetooth wireless communication technology……………….…..….1
2. About BTH002N..……………………………………………………....1
Before using
1. Overview…………………………………………………………..….2
2. Charging the headset……………………………………….............…3
How to use
1. Switching on/off the headset……………………………………….....4
2. Pairing the headset with Bluetooth devices……………………….….4
How to enter pairing mode…………………………………………....4
Pairing the headset with Bluetooth mobile phone………………….…4
Pairing the headset with Bluetoot h transmitter…………………….…5
Multi-pair……………………………………………………….……..6
3. Re-connecting to a Bluetooth device…………..……………………..6
4. Wearing the headset…………………… ……………………...……..7
5. Making calls with the headset…………..…………………………....7
6. Playing music……………………………………………………..….8
7. Restoring factory defaults and resetting……………………………..9
8. LED indicator………………………………………………...............9
9. Indication tone……………………………………………………....10
Care and maintenance
……………………………………………………..…….……11
FAQs
Specifications
………………………………………………..…1
…………………………………………………………2
……………………………………………………….…..4
…………………………………………….………...12
…………………………………..……….10
Welcome to use this Bluetooth stereo headset, BTH002N. Please read this
user’s manual carefully before using it.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range rad io-communication t echnology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth
technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and other devices. The max transmission range of
class II is 10 meters while the max transmission range of class I can reach
up to 100 meters.
2. About BTH002N
BTH002N is a stereo Bluetooth headset. It supports the fo llowing Bluetooth
profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can enjoy music wirelessly by using the BTH002N. Steps as following:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the headset
Redial last number
Voice dial
Adjust the volume
Switch the conversation between the headset and the mobile phone
Microphone mute
2) Pairing with Bluetooth music devices and Bluetooth transmitter which
support A2DP
Enjoy music wirelessly
Adjust the volume
Remote control the function of pause/play
Remote control last/next song
3) Easy to switch between conversation and music, you will not miss the
incoming call during listening to music.
1
4) Automatic connecting with the last paired device when turn on the
headset.
Note: Even though the paired device and headset support the same
Bluetooth profiles, the functions may be different due to the s pecification
difference of the paired devices.
Before using
1 Overview
1) Left speaker
2) Right speaker
3) Retractable string
4) < key :last song
5) – key: volume down
6) Charging port
7) > key :next song
8) LED Indicator
9) Multifunction button (MFB):Switch on/off the headset, answer, end and
reject call, microphone mute, voice dial and voice transfer, redial last
number, pause and play
10) + key: volume up
11) Built-in microphone
2
2 Charging the headset
First time charging
Before you use this Bluetooth headset, please charge the battery of
BTH002N fully.
Next time
When you hear three warning tones of “DONG” every 20 seconds, at the
same time, the red light blinks two times. It means the battery is low power
and need to be charged. There are two types of charging as below:
A . Charging the battery with travel charger
Step1: Plug the travel charger into standard AC power outlet.
Step2: Connect the travel charger with the charging port of the headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
B. Charging the battery with USB cable
Step1: Insert USB charging cable into USB port of PC.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
Note:Choosing travel charger or USB cable depends on different countries
or areas and actual demands.
Warning:
1) The battery is recycled.
2) Do not dispose of the battery in fire, as it may cause explosion.
3
Loading...