Zhongshan K mate General Electronics BTH001 User Manual
BTH001 1
BTH001
Bluetooth Stereo headset
User Manual V2.0
■■■■Brief introduction...............................................................................2
1. Bluetooth wireless communication technology .............................2
2. About BTH001...................................................................................... 2
■■■■ Before using......................................................................................3
1、、、、Overview .............................................................................................3
2、、、、Charging the headset ........................................................................4
■■■■ Using the headset............................................................................4
1、、、、Switching on/off the headset ............................................................4
2、、、、Pairing the headset with Bluetooth devices ....................................5
3、、、、Wearing the headset .......................................................................... 7
4、、、、Making call with the headset.............................................................7
5、、、、Playing music..................................................................................... 8
6、、、、LED indicator......................................................................................9
7、、、、Indication Tone.................................................................................10
■■■■ Specification....................................................................................11
Welcome to use this Bluetooth stereo headset, BTH001. Before using it,
please read this User Manual carefully.
BTH001 2
■■■■Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology
which was drawn up by Ericsson, IBM, Internet, Nokia, Tohiba. Through
Bluetooth technology, we can achieve the highest transmission rate among
mobile phone, computer, printer, PDA and other devices, and the max.
transmission range of class 2 is 10 meters ,the max. radio-communication
range of class 1 can reach up to 100 meters.
2. About BTH001
BTH001 is a Bluetooth stereo headset. It supports the following Bluetooth
profiles:
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
HSP —— Headset Profile
HFP —— Hands free Profile
You can enjoy music wirelessly by using the BTH002.Steps as following:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the headset.
Redial last number
Voice dial
Adjust volume
Switch the conversation between the headset and the mobile phone
Microphone mute
2) Pairing with Bluetooth music devices and Bluetooth transmitter which
support A2DP,
Enjoy music wirelessly
Adjust volume
Remote control the function of pause/revert to play
Remote control last/next song
3) Easy to switch between conversation and music, you will not miss the
incoming call during listening to music.
BTH001 3
4) Automatic connecting with the last paired device when turn on the headset.
Note: Even though the paired device and headset support the same Bluetooth
profiles, the functions may be different due to the specification difference of the
paired devices.
■■■■
Before using
1111、、、、Overview
1) Switch one
：Next song
：Pause/conversation mute
：last song
2) Switch two
: Volume down
: Multi-function key (switch on/off, answer/end/reject a call, voice dial/
conversation switch/redial)
：Volume up
3) LED indicator
4) Charging port (covered by rubber cover)
5) Built-in microphone
6) Loudspeaker
BTH001 4
2、、、、Charging the headset
First time charging
Before you use this Bluetooth headset, please charge the battery of
BTH001 full.
Next time
When you hear a warning tone of “beep” every 20 seconds, at the same
time, the red LED blinks. It means the battery is low power and need to
be charged.
The steps of charging are as follows:
Step1: Pull up the rubber cover of charging port
Step2: plug USB cable into USB port of PC
Step3:Connect the end of charging cable with charging
port of the headset.
When the red LED is on, the headset is charging.
When the red LED is off, the headset is charged full
Step4 It will take about 2.5 hours to charge the headset full.
Step5 Take out the charging cable from power socket and headset, and
cover the rubber cover
Warning:
1,The battery is recycled.
2,Do not dispose of the battery in fire, as it may cause explosion.
■■■■ Using the headset
1、、、、Switching on/off the headset
Function Operation LED
indicator
Switch on
Press the for 3-5 seconds,
and release till the blue LED
The blue LED
blinks quickly
Indication
tone
A “DI” tone
Loading...