Zhongshan K mate General Electronics BTE010 Users Manual
BTE010
Bluetooth mono headset
User’s manual
Brief introduction………………………………………..1
1. Bluetooth wireless communication technology…………………...1
2. About BTE010…………………………………………….………….1
Before use....……………………………………………..1
1. Overview…………………………………………………………..….1
2. Charging the battery of BTE010…………………………..…….....2
Basic operation………………………………………….3
1. Switching on/off BTE010………………………………….……...…3
2. Pairing BTE010 with a Bluetooth cell phone………….……….….3
3. Wearing BTE010……………………………………………………..4
4. Making calls with BTE010…………..………………………………4
5. LED indicator………………………………………………………….5
6. Indication tone……………………………………………………..…5
Care and maintenance……………………………….…5
FAQs…………………………………………………….…6
Specifications…………………………………………….6
Welcome to use this Bluetooth mono headset, BTE010. Please read this
user’s manual carefully before use.
Brief introduction
1.
Bluetooth Wireless communication technology
Bluetooth is a standard of close range radio-communication technology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth
technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and other devices. The max transmission range of
class 2 is 10 meters while the max transmit range of class 1 can reach up to
100 meters.
2.
About BTE010
BTE010 is a Bluetooth mono headset. It has the following features:
Answer call, end call and reject call
Redial last number
Voice dial (This function needs to be supported by your cell phone)
Adjust the volume
Call transfer between BTE010 and your Bluetooth cell phone
Microphone mute
Noise filtering function to ensure a clearer conversation
Before using
1.
Overview
Multi-function button (MFB
1
call, reject call and end call
2
Vice microphonenoise filtering
3
LED indicator
4
Ear cap
5
VOL + —Volume up
6
VOL - —Volume down
7
Main microphone
8
Charging port
9
Loudspeaker
10
Ear hook
Switch on/off, dial number, answer
2.
Charging the battery of BTE010
First use—You must charge the battery of BTE010 fully before first use.
Low power—When you hear a string of indication tones every 30 seconds and
see the red LED flashing, the battery is low power and needs to be charged.
The charging steps are as follows:
Step1: Connect the charger or charging cable to standard power outlet;
Step2: Connect the end of charger or charging cable to charging port of
BTE010;
Step3: The red LED is on while charging. It takes about 1.5 hours to fully
charge the battery;
Step4: When charging has completed, the blue LED will switch on.
Warning:
1) The battery is recycled.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Loading...