Zhongshan K mate General Electronics BTC015L Users Manual

BTC015L

Bluetooth Car Kit

User’s manual

 Br ie f in tr od uc ti on …… …………………………………… …… ..1

1. Bluetoo th wireles s c ommu nic ati on t ech nology……………… ..…1

2. About BTC015L...……… ……… ……… …………… ………...…. .1
 Be fo re us e… …… ……… …… …… ……… …… …………… .. ….2

1. Ov erv iew… ……… … ……………………………………… .… …2

2. Charging the battery of BTC015L………… ……………….………2
 Ge tt in g st arted………….… …… …… …… …… …… ………… ..3

1. Turning on/off BTC015L…. .…….…………… .……… …….…… ..3

2. Pairing BTC015L with a Bluetooth cell phone..…………......…..…4

3. In st all at ion …… …… ……… …… …… ……… …. .… ……….……4

4. Music playback… …… …… …… …………… …… …… …… …… 5

5. Making a call with BTC015L..……..….………………………… ...6

6. Re-connecting with a Bluetooth d evic e…………………………...8

7. Automatic turning o ff… …… …………… …………… …………..8

8. LED Indicator …… ……….……..… ……… ………………… ….8

9. In di ca ti on ton e……………………………… …… …… …… ….…9

 Care and maintenance…………… …………… ……….……..… 9
 FAQ s… ……… …… …… …………… …… …… ……… …… ..… .10
 Sp ecifica ti on s……………… …… ………………… ……..…...…10
 FCC not es … …… …… ……… …… ……… …… ……..… ...… 10

Welcome to use this Bluetooth Car Kit, BTC015L. Please read this user ’s
manual carefully before use.

 Brief introduction

1. Bluetooth wireless communication technology

Bluetooth is a standard of close range wireless technology that was drawn
up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology,
we can achieve the highest transmission rate among mobile phones,
computers, printers, PDAs and other devices. The max transmission range of
class II is 10 meters while the max transmission range of class I can reach
up to 100 meters.

2. About BTC015L

BTC015L is a Bluetooth Car Kit. It supports the following Bluetooth
profiles: HFP, HSP, A2DP and AVRCP.
Connect BTC015L to AUX in jack of car audio system, now you can make a
call or play music. The hands-free car kit has the following features:

 Answer a call, end a call and reject a call
 Redial last number
 Voice dial (This function needs to be supported by your cell phone)
 Call transfer between BTC015L and your cell phone
 Microphone mute
 Music pause/play

Remark: Even though the paired device and the hands-free car kit support
the same Bluetooth profiles, functions may vary due to specification
differences of the paired devices.

1

 Before use

1

Multi-function Button (MFB): Power on/power off/pair/end
a call/cancel calling/answer a call/microphone mute/call
transfer/redial last number/music play/music pause

2

3.5mm Line-in jack/charging socket

3

Built-in microphone

4

3.5mm audio out plug

5

Velcro 6 3.5mm Line-in jack

7

3.5mm audio out plug

1. Overview

2. Charging the battery of BTC015L

BTC015L comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.

Connect the charger to an standard power outlet and the charger plug to the
charging socket of BTC015L. The red LED is on while charging. It takes
about 1.5 hours to charge the battery fully. When charging is completed, the
red LED is off.

2

When BTC015L is on and the battery becomes low, red LED flashes once

Function

Operation

LED indicator

Power on

Press and hold MFB button
for about 3～5 seconds until
hearing indication tone

Blue LED flashes 5
times

Power off

Press and hold MFB button
for about 3～5 seconds until
hearing indication tone

Red LED flashes 5
times

Entering
pairing mode

Make sure BTC015L is off,
and then press and hold
MFB button for 4～5
seconds until red and blue
LEDs flash alternately

Red and blue LEDs
flash alternately

every 30 seconds and the BTC015L emits three “DU” tones every 30
seconds. Please recharge the battery fully as described above.

Remarks:

1) The battery will dry up if you don’t use BTC015L for a long time. If this

happens, you have to charge BTC015L for about 30 minutes, and then
red LED will be on.

2) Please don’t attempt to take out the battery from BTC015L, as this might

damage it.

Warning:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

 Getting started

1. Turning on/off BTC015L

Remark: Pairing mode will last 2 minutes. If no devices can be connected

within 2 minutes, BTC015L will return back to standby mode. If you want
to repair, please turn off BTC015L first and then enter pairing mode.

3