Zhongshan K mate General Electronics BTC009B Users Manual

BTC009

Bluetooth car kit

User’s manual

 Getting started……………………………………………..………..1

1. Brief introduction…………………………………………………….1

2. Overview………………………………… …………………………..1

3. Installation………..………………………………………………......1

 Using the car kit……………….……………………………………..1

1. Pairing with a Bluetooth cell phone……………………………….….1

2. Turning the car kit on/off……………………………………..……....2

3. Making calls with the car kit……………..…………………………...3

4. Automatic connecting to a Bluetooth device………………………....4

5. LED indicator………………………………………………………....4

 Care and maintenance…………………………………………….…4
 FAQs..………………………………………………………….….…..5

 Specifications………………………………………………………....6

 Getting started

1. Brief introduction

Welcome to use this Bluetooth car kit BTC009. It adopts echo cancellation
technology and provides high-level sound quality. At the same time it
offers easy to use hands-free functions. Please read this user manual
carefully before using it.

2. Overview

3. Installation

1) Insert the car kit into your car ’s cigarette lighter socket;

2) Align microphone and speaker so that they face the driver without any

barriers that might reduce conversation quality;

 Using the car kit

1. Pairing with a Bluetooth cell phone

Please make sure your cell phone is Bluetooth-enabled. Specific pairing
steps may vary with different cell p hones. Please refer to your cell phone’s
user manual for further information. The pairing steps are as follows:

1

1) Insert the car kit into your car ’s cigarette lighter socket;

2) Make sure your car kit is off, otherwise turn off the car kit first (please

refer to “turning the car kit on/off”);

3) Press and hold the red button for 7-8 seconds and release it when

the red and blue LEDs flash alternately. The car kit entered pairing mode;

4) Switch on your cell phone’s Bluetooth function a nd search for Bluetooth

devices. After the search has been completed, select “BTC009” from the
Bluetooth device list.

5) According to indication, enter password or PIN No:”0000” and

press ”Yes” or “confirm”;

6) After successful pairing, select “BTC009” from the Bluetooth device list

and press “connect”. The blue LED will flash once every 5 seconds when
the connection is established.

Remarks:



Pairing mode will last 2 minutes. The car kit will exit pairing mode
automatically if it can’t be connected to any device within 2 minutes. If
you want to continue to pair the car kit with a Bluetooth device, please
turn it off first and re-pair according to steps 1-6 mentioned above.



After successful pairing the car kit and your cell phone will remember
each other. The devices don’t have to be re-paired at next use unless the
pairing information is deleted because of a new pairing.



The car kit can remember 8 paired devices. When the number of paired
devices exceeds 8, the old ones will be replaced starting with the first.



Every time you turn on BTC009 it will try to connect to the last
connected device automatically. If you want to pair it with another device,
please switch off the paired device’s Bluetooth function first and pair the
car kit with the new device according to steps 1～6 mentioned above.

2. Turning the car kit on/off
Function Operation

Turn on the
car kit
Turn off the
car kit

Press and hold the red button for about 3-5 seconds
until the blue LED flashes
Press and hold the red button for about 3-5 seconds
until the red LED flashes

2