Zhongshan K mate General Electronics BTC005B User Manual
BTC005B
Bluetooth handsfree kit
Brief introduction…………………………………………..1
1. Bluetooth wireless communication technology…………………1
2. About BTC005B……………………………………………………1
Before using………………………………………………..1
1. Overview……………………………………………………………1
2. Charging the handsfree kit……………………………………….2
Using the handsfree kit……………………………….…3
1. Switching on/off the handsfree kit…………………………….…3
2. Pairing the handsfree kit with Bluetooth mobile phone…….…3
3. Installing the handsfree kit ………………………………………4
4. Making call with the handsfree kit………………………………4
5. Bluetooth Music Receiver……………………………………… 5
6. Re-connecting with Bluetooth device……………………………5
7. Automatic switching off……………………………………………6
8. LED indicators and indication tone….……………………….…..6
Care and maintenance…………………………………….7
FAQ…………………………………………………………...7
Specification………………………………………………..8
Welcome to use this Bluetooth handsfree kit, BTC005B. Please read this
user manual carefully before using it.
Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology
that was drawn up by Ericsson, IBM, Internet, Nokia and Toshiba. Through
Bluetooth technology, we can achieve the highest transmission rate among
mobile phone, computer, printer, PDA and other devices. The max transmit
range of class 2 is 10 meters while the max transmit range of class 1 can
reach up to 100 meters.
2. About BTC005B
BTC005B is a portable Bluetooth handsfree kit. It adopts echo cancellation
technology and provides high-level sound quality. At the same time, it has
simple handsfree operation. It can be used with Bluetooth mobile phone
and PDA which support Headset Profile、Handsfree Profile、or (and) A2DP
profiel. It has the following fetures:
1) Pairing with the Bluetooth mobile phone and PDA which support HFP.
Answer, end and reject call from the handsfree kit
Redial last call
Voice dial(it needs your mobile phone to support.)
Adjust volume
Mute the Microphone while in call.
Voice announces the status of hands free kit or the phone number
of the incoming caller.
2) Pairing with Bluetooth music devices and Bluetooth transmitter which
support A2DP
Enjoy music wirelessly
Adjust volume
Remote control the function of pause/revert to play
Remote control last/next song
Before using
1. Overview
1
2
3
4
5
6
7
8
9
10
button—switch on/off, pairing, answer, voice dial, redial last
call and microphone mute
button—End and reject call, pause song, resume song
button—Volume up, skip backward
button—Volume down, skip forward
First microphone
Second microphone
Charging port
Stereo Audio Line Out
Magnet
Metal fixed clip
2. Charging the handsfree kit
First using—You must charge the battery fully before first using.
Low power—When you hear tones of “Dong Dong Dong” every 10 seconds
or see the red LED to flash twice every 10 seconds, it means that the battery
is low power and need to be charged.
The charging steps are as follows:
Step1: Connect the charging cable to USB port;
Step2: Connect the end of the charging cable to charging port of the side of the
handsfree kit.
When the red LED is on, it is charging.
When the red LED is off, it has charged fully.
It will take about 2.5 hours to charge the handsfree kit fully.
Remarks:
1. The battery will dry up if you don’t use the handsfree kit for a long time, at
this time, you have to charge the handsfree kit for about 30 minutes, the
LED indicator will be on.
2. Please don’t attempt to take out the battery from the handsfree kit, so as
not to damaging the handsfree kit.
Warning:
1. The battery is recycled.
2. Do not dispose of the battery in fire, as it may cause
explosion.
Using handsfree kit
1. Switching on/off handsfree kit
Function Operation LED indicator
Press button for about 3～
Switch on
5 seconds, and release it till
blue light flashes
Press button for about 2～
Swith off
3 seconds, and release it till red
light flashes
Make sure the hands free kit is
Enter into
pairing mode
off, press
7～8 seconds, and release it till
blue LED and red LED flashes
alternately
button for about
Blue LED flashes 3
time
RED LED flashes 3
time
blue LED and red
LED flashes
alternately
Indication
voice
Headset
Ready
Powering
Down
Please pair
Bluetooth
phone now
Remark: The pairing mode will last 2 minutes, it will switch to standby mode if
exceeding 2 minites. When you have to repair it, please switch off
the handsfree kit firstly, and then make it enter into pairing mode
again.
2. Pairing the handsfree kit with Bluetooth mobile phone
Please make sure your mobile phone has bluetooth function that is available.
Specific pairing steps may vary with different mobile phones. Please refer to
your mobile phone user manual for further information. The steps are as
follows:
1)、Keep the handsfree kit and Bluetooth mobile phone within 1 meter when
Loading...