Zhongshan Auto Electronics Technology 3300 Users manual

AUTO3300SMS V03 9207003000001

Push Button Engine Start System

Index

Index

Operation Guide of Engine Start

8

Tips For Trouble Shooting

Digital Keypad

Warning:

1.When you leave the car with Remote Control and lock the doors, please make sure there is no passenger
especially child whose body is staying on the slide rail of the open window to avoid any injury.

2.The user shall take the Remote Control along with him/her and take good care of it. (Please do not leave the
Remote Control in the car to avoid loss caused by Remote Control battery low or electromagnetic interference.)

Push Button Engine Start System Push Button Engine Start System

Operation Guide of Engine Start

1.Press button: arm and lock

2.Press button: disarm and unlock

Lock button

Remote start/stop

3.Press and hold button for 3 sec.: trunk release

4.Press the Function button: car finding with sound and light

Unlock button

5.Press and hold the Function button for 3 sec. in armed mode: remote engine start

6.Press + buttons at the same time, the horn beeps twice to turn OFF the PKE function.

(Only 3300 series have this function.)

7.Press + buttons at the same time, the horn beeps 3 times to turn ON the PKE function.

(Only 3300 series have this function.)

8.Press the Function button while stepping on brake pedal: Start/Stop engine

Function button of Remote Control:
Remote engine start stop/Car finding

The intelligent Remote Control is an intellisense electronic device.
Please follow the following instructions to avoid damage.

1.Don't put the Remote Control in an environment with damp, sunshine or high temperature.

2.Don't dismantle the Remote Control. The unprofessional users cannot check the components inside.

3.To avoid strong strike or heavy crash.

4.Don't put the Remote Control together with the metal keys to avoid damage or signal shielding.

Remote engine start stop/Car finding
Remote engine star stop/Car finding
Remote engine start stop/Car finding
Remote trunk release

If the PKE function of the Remote Control is not working or the LED indicator is dim or not lit, probably the battery is low.
Please check the batteries of the Remote Control and replace them with new ones.

2

Installation position of
ignition button

1. Step on the brake pedal while disarmed, press the ignition button then the engine will start, press the ignition button again the engine will stop.

2. Do not step on the brake pedal while disarmed, press the ignition button to turn on ACC-ON-OFF-ACC successively.

3. Step on the brake pedal while disarmed, press the Function button on the Remote Control the engine will start, press the Function button again the engine will stop.

4. Do not step on the brake pedal while disarmed, press and hold the ignition button for 15 seconds the engine will start. While the engine is running,
press and hold the ignition button for 5 seconds the engine will stop.

5. Automatic Transmission C ar: While armed, pre ss and hold the Function button on the Remote Control, the engine will start. Press and hold the
Function button again the engine will stop.

6. Manual Transmission Car: Do not turn off the engine with the ignition button, shift the ge ar selector in Neutra l position, pull t he hand brake on,
open and close all the doors, p ress and hold the Function button on the Remote Control to turn off the engine. While the car is in armed state,
press and hold the Function button of the Remote Control to start the engine, press and hold the Function button again to turn off the engine.
(Note: For manual transmission car, if the engine is stopped by pressing the ignition button, then the engine cannot be started with the

Remote Control. For safety purpose, please follow this instruction.)

Important Notice:

The factory setting of the remote engine start function is OFF for manual transmission car. If the user wants this function please
apply for it from the dealer.

3