Zhone 6211-I3-xxx, 6219-X1-NA-0CC, 6219-x1-xxx User Manual
6219-X1 ADSL2+
4–Port Router
Users Guide
Document Part Number: 830-02072-02
February 2010
Zhone Technologies, Inc.
@ Zhone Way
7001 Oakport Street
Oakland, CA 94621
USA
510.777.7000
www.zhone.com
info@zhone.com
COPYRIGHT ©2000-2010 Zhone Technologies, Inc. All rights reserved.
This publication is protected by copyright law. No part of this publication may be copied or
distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or
computer language in any form or by any means, electronic, mechanical, magnetic, manual or
otherwise, or disclosed to third parties without the express written permission from Zhone
Technologies, Inc.
Bitstorm, EtherXtend, IMACS, MALC, MXK, Raptor, SLMS, Z-Edge, Zhone, ZMS, zNID and the
Zhone logo are trademarks of Zhone Technologies, Inc.
Zhone Technologies makes no representation or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability, non infringement, or fitness
for a particular purpose. Further, Zhone Technologies reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of Zhone
Technologies to notify any person of such revision or changes.
This product may contain copyrighted software that is licensed under the GNU General Public
License (“GPL”), a copy of which is available at www.gnu.org/licenses. You may obtain a copy of
such software, in source code form, from Zhone for a period of three years after our last shipment
of the product by following the instructions at www.zhone.com/gplinfo.
6219-X1 Router Users Guide 2
Important Safety Instructions
1. Read and follow all warning notices and instructions marked on the product or included in
the manual.
2. Slots and openings in the housing are provided for ventilation. To ensure reliable operation
of the product and to protect it from overheating, these slots and openings must not be
blocked or covered.
3. Do not allow anything to rest on the power cord and do not locate the product where
persons will walk on the power cord.
4. Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous high voltage points or other ri sks. Refer all servicing to qualified service
personnel.
5. General purpose cables are used with this product for connection to the network. Special
cables, which may be required by the regulatory inspection authority for the installation site,
are the responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24
AWG line cord for connection to the Digital Subscriber Line (DSL) network.
6. When installed in the final configuration, the product must comply with the applicable Safety
Standards and regulatory requirements of the country in which it is installed. If necessary,
consult with the appropriate regulatory agencies and inspection authorities to ensure
compliance.
7. A rare phenomenon can create a voltage potential between the earth grounds of two or
more buildings. If products installed in sep arate buildings are interconnected, the voltage
potential may cause a hazardous condition. Consult a qualified electrical consultant to
determine whether or not this phenomenon exists and, if necessary, implement corrective
action prior to interconnecting the products.
8. Input power to this product must be provided by one of the following: (1) a UL Listed/CSA
certified power source with a Class 2 or Limited Power Source (LPS) output for use in
North Ameri c a, or (2) a certified transformer, with a S afety Extra Low Voltage (SELV) output
having a maximum of 240 VA available, for use in the country of installation.
9. In addition, since the equipment is to be used with telecommunications circuits, take the
following precautions:
— Never install telephone wiring during a lightning storm.
— Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
— Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
— Use caution when installing or modifying telephone lines.
— Avoid using a telephone (other than a cordless type) during an electrical storm. There may
be a remote risk of electric shock from lightning.
— Do not use the telephone to report a gas leak which is in the vicinity of the leak.
CE Marking
When the product is marked with the CE mark on the equipment label, a supporting Decla ratio n
of Conformity may be downloaded from the Zhone World Wide Web site at www.zhone.com.
FCC Part 15 Declaration
An FCC Declaration of Conformity may be downloaded from the Zhone World Wide Web site at
www.zhone.com.
6219-X1 Router Users Guide 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The authority to operate this equipment is conditioned by the requirement that no modifications
will be made to the equipment unless the changes or modifications are expressly approve d by the
responsible party.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
Notice to Users of the United States Telephone Network
The following notice applies to versions of the modem that have been FCC Part 68 approved.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachment (ACTA). On the bottom side of this equipment is a
label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone Company.
This equipment is intended to connect to the Public Switched Telephone Network through a
Universal Service Order Code (USOC) type RJ11C jack. A plug and jack used to connect this
equipment to the premises wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It has been designed to be connected to a compatible modular
jack that is also compliant.
If the modem causes harm to the telephone network, the Telephone Company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice is not
practical, the Telephone Company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The Telephone Company may make changes in its facilities, equipment, opera tions or
procedures that could affect the operation of the equipment. If this happens, the Telephone
Company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service. If trouble is experienced with the modem, refer to the repair and
warranty information in this document.
If the equipment is causing harm to the telephone network, the Telephone Company may request
that you disconnect the equipment until the problem is resolved.
6219-X1 Router Users Guide 4
The user may make no repairs to the equipment.
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporatio n commission for information.
If the site has specially wired alarm equipment connected to the telephone line, ensure the
installation of the modem does not disable the alarm equipment. If you have questions about
what will disable alarm equipment, consult your Telephone Company or a qualified installer.
Notice to Users of the Canadian Telephone Network
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation IC before the
registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not imply
that Industry Canada approved the equipment.
If your equipment is in need of repair, contact your local sales representative, service
representative, or distributor directly.
6219-X1 Router Users Guide 5
!
CANADA - EMI NOTICE:
This Class B digital apparatus meets all requirements of the Canadian interference-causing
equipment regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du règlement sur le matérial
brouilleur du Canada.
Japan Notices
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a
radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
6219-X1 Router Users Guide 6
Table of Contents
Important Safety Instructions................................................................................................................................3
CE Marking ......................................................................................................................................................3
FCC Part 15 Declaration..................................................................................................................................3
About This Guide................................................................................................................................................11
Style and notati on conventions......................................................................................................................11
Typographical conventio ns........................................................................................................................12
Acronyms.......................................................................................................................................................12
Contacting Global Service and Support.........................................................................................................14
Chapter 1 Introduction 15
System Requirements........................................................................................................................................15
Package Contents..............................................................................................................................................16
Safety Instructions..............................................................................................................................................16
Front Panel.........................................................................................................................................................17
Back Panel .........................................................................................................................................................18
Chapter 2 Hardware Installation and PC Setup 19
Overview ............................................................................................................................................................19
Connecting your hardware.................................................................................................................................19
Mounting the Router...........................................................................................................................................20
Standing the Router Vertically............................................................................................................................20
Configuring Your Computer................................................................................................................................21
Windows 2000 ...............................................................................................................................................21
Windows XP...................................................................................................................................................22
Chapter 3 The Web User Interface 23
Log in to the Router............................................................................................................................................23
Summary............................................................................................................................................................24
WAN Info............................................................................................................................................................25
LAN Statistics .....................................................................................................................................................25
WAN Statistics....................................................................................................................................................26
ATM Interface Statistics......................................................................................................................................26
ADSL Statistics...................................................................................................................................................27
ADSL BER Test ..................................................................................................................................................28
Route..................................................................................................................................................................29
ARP....................................................................................................................................................................29
DHCP .................................................................................................................................................................30
6219-X1 Router Users Guide 7
Chapter 4 Advanced Setup 31
WAN...................................................................................................................................................................31
Create a New WAN Connection — A TM PVC Configuration.........................................................................32
Connection Type | PPPoA .............................................................................................................................33
Connection Type | PPPoE .............................................................................................................................36
Connection Type | MAC Encapsulation Routing............................................................................................39
Connection Type | IP over ATM......................................................................................................................42
Connection Type | Bridging............................................................................................................................44
Remove Function...........................................................................................................................................46
Finish Function...............................................................................................................................................47
LAN Local Area Network (LAN) Setup...............................................................................................................48
Ethernet Mode....................................................................................................................................................50
NAT.....................................................................................................................................................................51
Virtual Servers................................................................................................................................................51
Port Triggering ...............................................................................................................................................53
DMZ Host.......................................................................................................................................................54
MAC Filtering .................................................................................................................................................55
Parental Control.............................................................................................................................................57
URL Filter ...........................................................................................................................................................58
Quality of Service...............................................................................................................................................59
Queue Config.................................................................................................................................................59
QoS Classification..........................................................................................................................................60
Routing...............................................................................................................................................................62
Default Gateway ............................................................................................................................................62
Static Route....................................................................................................................................................63
Policy Route...................................................................................................................................................64
DSL.....................................................................................................................................................................65
Modulation Methods ..................................................................................................................................65
Capability...................................................................................................................................................66
DSL Advanced Settings.................................................................................................................................66
Interface Group ..................................................................................................................................................68
IPSec..................................................................................................................................................................70
Certificate ...........................................................................................................................................................72
Local...............................................................................................................................................................72
Trusted CA.....................................................................................................................................................74
6219-X1 Router Users Guide 8
Chapter 5 Wireless 75
Basic ..............................................................................................................................................................75
Security..........................................................................................................................................................77
MAC Filter......................................................................................................................................................81
Wireless Bridge..............................................................................................................................................82
Advanced.......................................................................................................................................................84
Station Info.....................................................................................................................................................85
Diagnostics.........................................................................................................................................................86
Management ......................................................................................................................................................87
Settings..........................................................................................................................................................87
Backup Settings.........................................................................................................................................87
Update or Restore User Settings...............................................................................................................88
Restore Default..........................................................................................................................................88
System Log ........................................................................................................................................................89
Configure System Log ...................................................................................................................................90
SNMP.................................................................................................................................................................91
TR-069 Client.....................................................................................................................................................91
Access Control...................................................................................................................................................92
Services .........................................................................................................................................................92
IP Addresses......................................................................................................................................................93
Passwords..........................................................................................................................................................94
Update Software.................................................................................................................................................95
Reboot Router....................................................................................................................................................96
Chapter 6 Troubleshooting 97
The Router Is Not Functional .............................................................................................................................97
You Cannot Connect to the Router....................................................................................................................97
LEDs Blink in a Sequential Pattern....................................................................................................................97
The Status LED Continues to Blink....................................................................................................................97
The Status LED is Alway s Off.............................................................................................................................98
Diagnosing Problems using IP Utilities ..............................................................................................................98
Ping................................................................................................................................................................98
Nslookup........................................................................................................................................................99
Appendix A – Glossary 101
6219-X1 Router Users Guide 9
About This Guide
This guide is intended for use by installation technicians, system administrators, and network
administrators. It explains how to install the 1611-A3 router.
Style and notation conventions
The following conventions are used in this document to alert users to information that is
instructional, warns of potential damage to system equipment or data, and warns of potential
injury or death. Carefully read and follow the instructions included in this docum ent.
Caution: A caution alerts users to conditions or actions that could damage equipment or data.
Note: A note provides important supplemental or amplified information.
Tip: A tip provides additional information that enables users to more readily complete their tasks.
WARNING! A warning alerts users to conditions or actions that could lead to injury or death.
6219-X1 Router Users Guide 11
Typographical conventions
The following typographical styles are used in this guide to represent specific types of
information.
Bold
Fixed
Fixed Bold
Fixed Bold
Italic
Italic
PLAIN UPPER
CASE
Command Syntax
Used for names of buttons, dialog boxes, icons, menus,
profiles when placed in body text, and property pages (or
sheets). Also used for commands, options, parameters in
body text, and user input in body text.
Used in code examples for computer output, file names, path
names, and the contents of online files or directories.
Used in code examples for text typed by users.
Used in code examples for variable text typed by users.
Used for book titles, chapter titles, file path names, notes in
body text requiring special attention, section titles,
emphasized terms, and variables.
Used for environment variables.
Brackets [ ] indicate optional syntax.
Vertical bar | indicates the OR symbol.
Acronyms
The following acronyms are related to Zhone products and may appear throughout this manual:
Table 1: Acronyms and their descriptions
Acronym Description
ADSL Asymmetrical Digital Subscriber Line
AP Access Point
ACS Auto Configuration Server
DHCP Dynamic Host Configuration Protocol
DSL Digital Subscriber Line
EFM Ethernet in the First Mile
MALC Multi-Access Line Concentrator
MIB Management Information Bases
NAT Network Address Translation
NMS Network Management System
PVC Permanent Virtual Circuit
6219-X1 Router Users Guide 12
RADIUS Remote Authentication Dial In User Service
SHDSL Symmetric High-bit-rate Digital Subscriber Line
SLMS Single Line Multi-Service
SNMP Simple Network Management Protocol
TFTP Trivial File Transfer Protocol
VoIP Voice over IP
VoWi-Fi Voice-over-Wifi
VPN Virtual Private Network
WEP Wired Equivalent Privacy
Wi-Fi Wireless Fidelity (IEEE 802.11 wireless networking)
WMM Wi-Fi Multimedia
WPA Wi-Fi Protected Access
ZMS Zhone Management System
6219-X1 Router Users Guide 13
Contacting Customer Service and Technical Support
Customer service and technical support for this Zhone device are provided by your Internet
Service Provider.
6219-X1 Router Users Guide 14
Chapter 1 Introduction
The 6219-X1 ADSL 2+ 4 port WiFI is an easily installed router which delivers the performance
needed for multimedia applications
This User’s Guide will show you how to set up the router, and how to customize its configuration
to get the most out of this product.
The 6219-X1 provides the following features:
• Built-in ADSL modem which offers G.dmt, G.lite, T1.413, ADSL2, Annex L, and
ADSL2+ to meet different linking speeds from your ISP
• Four 10/100BaseT Ethernet ports to provide Internet connectivity to all computers on
your LAN
• Wireless Access Point with 802.11b/g with 200mW antenna power for extended WiFi
reach and performance
• Easy-to-use configuration program accessible through a standard web browser
This User Guide will show you how to connect your 6219-X1 and how to customize its
configuration to get the most out of your new product.
System Requirements
In order to use your 6219-X1 ADSL router for Internet access, you must have the following:
• ADSL service subscription from your ISP
• A PC with:
o An Ethernet 10/100BaseT network interface card
o A processor equivalent to or faster than a Pentium II 133 MHz
o 32 MB RAM or greater
o Windows 95b, 98, 98SE, 2000, ME, NT, or XP (Note: Windows 95 requires the
installation of the Winsock program, not included.)
• (Optional) An Ethernet hub or switch, if you are connecting the device to several
computers on an Ethernet network.
• For system monitoring or configuration using the supplied web interface, a web
browser such as Internet Explorer Version 6.0 or later. Netscape is not supported.
6219-X1 Router Users Guide 15
Package Contents
In addition to this document, your package should arrive containing the following:
• 6219-X1 ADSL 2+ 4 port router
• 12V 1 A power adapter
• RJ-11 telephone cable
• RJ-45 Ethernet cable
• User Manual / Quick Guide
Safety Instructions
Place your modem on a flat surface close to the cables in a location with sufficient ventilation.
To prevent overheating, do not obstruct the ventilation openings of the device.
Plug the device into a surge protector to reduce the risk of damage from power surges and
lightning strikes.
Operate this equipment only from an electrical outlet with the correct power source as indicated
on the adapter.
Do not open the cover of the device. Opening the cover will void any warranties on the
equipment.
Do not use another power adapter except for the one which accompanies the unit.
Unplug equipment first before cleaning. A damp cloth can be used to clean the equipment. Do not
use liquid / aerosol cleaners or magnetic / static cleaning devices.
6219-X1 Router Users Guide 16
Front Panel
LED Mode INDICATION
Power
Alarm
LAN 1-4
WIFI
DSL
Internet
Solid
green
Solid red
No light
Solid DSL is not connected
No light DSL is linked successfully
Solid on
green
Flashing The router is sending or receiving data over Ethernet
Off No LAN Link
Solid Wireless access point option is enabled
No light Wireless access point is disabled
Blinking Wireless traffic activity
Solid
Flashing The router is attempting to connect to your ISP
Solid ADSL is connected
No light ADSL is not connected. The ALARM LED will be red
Blinking The router is connected to the LAN
Boot-up successful
Router is booting up or there is problem with internal Power On Self
Test (POST )diagnostic
The router may not be turned on. Check if the power adapter is
connected to the modem and plugged in
Ethernet interface is successfully connected to a device through the
LAN port
Connection established. The router is able to communicate with your
ISP via ADSL
6219-X1 Router Users Guide 17
Back Panel
NOTE: The below port descriptions are listed as they appear on the back panel from left to right.
Port Description
Phone
Line
LAN1 – LAN4
Reset / Default
Power
RJ-11 cable connects to telephone (no external splitter necessary;
unit has internal splitter).
RJ-11 cable connects between telephone and the LINE port using a
splitter (not included) if needed.
RJ-45 connects the unit to an Ethernet device such as a PC or a
switch.
Restart—press the button for less than 4 seconds.
Default settings—press the button for 4 seconds or longer.
Connects to a 12V 1A power adapter.
Warning : pressing the RESET button may erase the
configuration your service provider has loaded in the
modem and may cause service disruption.
6219-X1 Router Users Guide 18
Chapter 2 Hardware Installation and PC Setup
Overview
This chapter provides basic instructions for connecting the router to a computer or a LAN and to
the Internet using DSL. The first part provides instructions to set up the hardware, and the second
part describes how to prepare your PC for use with the router. Refer to Chapter 3, Using the Web
Interface for configuration instructions.
It is assumed that you have already subscribed to DSL service with your telephone company or
other Internet service provider (ISP).
Connecting your hardware
Shut down your PC before connecting the router. To connect your modem:
1. Connect the ADSL Line and Telephone
Connect one end of an RJ-11 cable from your ADSL connection and the other end to the
LINE port of the modem.
Use a second RJ-11 cable to connect between a telephone and the PHONE port of the
modem.
2. Connect the PC to the Router
To use the Ethernet connection, connect the Ethernet cable from the computer directly to the
router. Connect one end of the Ethernet cable to one of the four ports labelled LAN on the
back of the router and attach the other end to the Ethernet port of your computer.
3. Connect the Power Adapter
Complete the process by connecting the AC power adapter to the POWER connector on the
back of the device and plug the adapter into a wall outlet or power strip. Then turn on and
boot up your PC and any LAN devices, such as hubs or switches, and any computers
connected to them.
6219-X1 Router Users Guide 19
Mounting the Router
The router can be mounted on the wall with two screws. Mounting can be done on wall material
including concrete, wood, or drywall. Select an appropriate location free from obstructions or any
possible interference. Make sure the cables can be easily attached to the router without strain.
The illustration below shows how to mount the router horizontally on a wall.
Standing the Router Vertically
The router can be set vertically on the desktop or other surface. On the right side of the unit as it
sits horizontally is a foot which can be rotated.
6219-X1 Router Users Guide 20
Configuring Your Computer
Prior to accessing the router through the LAN or the USB port, note the following necessary
configurations—
• Your PC’s TCP/IP address: 192.168.1.__( the last number is any number between 2 and
254)
• The router’s default IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
Below are the procedures for configuring your computer. Follow the instructions for the operating
system that you are using.
If you used the Ethernet cable to connect your router and PC, you do not need any specific driver
installation.
Windows 2000
1. In the Windows taskbar, click the Start button and point to Settings, Control Panel, and
Network and Dial-up Connections (in that order).
2. Click Local Area Connection. When you have the Local Area Connection Status window
open, click Properties.
3. Listed in the window are the installed network components. If the list includes Internet
Protocol (TCP/IP), then the protocol has already been enabled, and you can skip to Step
10.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, then click Install.
5. In the Select Network Component Type window, click on protocol and then the Add
button.
6. Select Internet Protocol (TCP/IP) from the list and then click on OK.
7. If prompted to restart your computer with the new settings, click OK.
8. After your computer restarts, click the Network and Dial-up Connections icon again, and
right click on the Local Area Connection icon and then select Properties.
9. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP)
and then click Properties.
10. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labelled Use
the following IP address and type 192.168.1.x (where x is any number between 2 and 25 4)
and 255.255.255.0 in the IP address field and Subnet Mask field.
11. Click OK twice to save your changes and then close the Control Panel.
6219-X1 Router Users Guide 21
Windows XP
1. In the Windows taskbar, click the Start button and point to Settings and then click Network
Connections.
2. In the Network Connections window, right click on the Local Area Connection icon and
click on Properties.
3. Listed in the Local Area Connection window are the installed network components. Make
sure the box for Internet Protocol (TCP/IP) is checked and then click Properties.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labelled Use
the following IP address and type 192.168.1.x (where x is any number between 2 and 25 4)
and 255.255.255.0 in the IP address field and Subnet Mask field.
5. Click OK twice to save your changes and then close the Control Panel.
6219-X1 Router Users Guide 22
Chapter 3 The Web User Interface
The 6219-X1 combination modem/router has a Wide Area Network (WAN) connection which
connects to your phone line. This connects to your Internet Service Provider (ISP) via the phone
line. The four Local Area Network (LAN) connections are where you plug in your local computers
to the router. The 6219-X1 also has a wireless interface. The router is normally configured to
automatically provide all the PCs on your network with Internet addresses.
To set up your router with a basic configuration, from the top navigation bar, select Advanced
Setup from the left hand navigation bar. Setup has two main subsections underneath Advanced
Setup — WAN and LAN. Setup instructions are covered in Chapter 4, Advanced Setup.
If you connected a PC (rather than a hub or a switch) directly to the router, your LAN consists of
that PC. You may also create connections for various protocol options by creating new connections.
To configure your router you will first need to log in to the router.
Note: Before configuring your router, make sure you have followed the instructions in Chapter 2
Hardware Installation and PC Setup. You should have your PCs configured for DHCP mode (if
your router will be), and have proxies disabled on your browser. If you see a login redirection
screen when you access the web interface, verify that JavaScript support is enabled in your
browser. Also, if you do not get the screen shown below, you may need to delete your temporary
Internet files.
Log in to the Router
This section will explain how to log in to your router.
1. Launch your web browser.
2. Enter the URL
A login screen like the one below will be displayed after you connect to the user interface.
3. Enter your user name and password, and then click on OK to display the user interface.
http://192.168.1.1 in the address bar and press Enter.
The user name / password are admin / admin and both are case sensitive.
Note: There are two default user name and password combinations. The user / user name and
password combination can display device status, but cannot change or save configurations. The admin /
admin combination can perform all functions. Passwords can be changed at any time.
Summary
Access the general information of the router by clicking Summary under Device Info. This
screen shows details of the router such as the version of the software, bootloader, LAN IP
address, etc. It also displays the current status of your DSL connection as shown below—
6219-X1 Router Users Guide 24
WAN Info
Display the WAN status report from the router by clicking WAN under Device Info. The graphic
below shows the screen when a WAN connection is set up.
LAN Statistics
Display LAN statistics by clicking LAN under Statistics
The reset statistics button zeros out the counters so that you can more easily determine if the
errors are still occurring.
6219-X1 Router Users Guide 25
WAN Statistics
Display WAN statistics by clicking WAN under Statistics.
The reset statistics button zeros out the counters so that you can more easily determine if the
errors are still occurring.
ATM Interface Statistics
Display ATM statistics by clicking ATM under Statistics.
6219-X1 Router Users Guide 26
ADSL Statistics
Display ADSL statistics by clicking ADSL under Statistics. Information contained in this screen is
useful for troubleshooting and diagnostics of connection problems.
6219-X1 Router Users Guide 27
ADSL BER Test
The ADSL Bit Error Rate (BER) test determines the quality of the ADSL connection. The test is
performed by transferring idle cells containing a known pattern and comparing the received data
with this known pattern to check for any errors The BER Test reflects the ratio of error bits to the
total number transmitted.
If you click on the ADSL BER Test button at the bottom of the ADSL Statistics page, the following
pop-up screen will appear allowing you to set the tested time and to begin the test.
To run a BER test:
1. On the bottom of the ADSL statistics page, click ADSL BER Test
2. In the Tested Time (sec) drop down, select the test duration, and then click Start.
3. Check the results.
6219-X1 Router Users Guide 28
Route
Access the routing status report from the router by clicking Route under Device Info.
ARP
Display the ARP status report by clicking ARP under Device Info.
ARP (Address Resolution Protocol) maps the IP address to the physical address, labeled HW
Address (the MAC address) and identifies computers on the LAN.
6219-X1 Router Users Guide 29
DHCP
Access the DHCP Leases screen by clicking DHCP under Statistics.
This page shows the computers, identified by the hostname and MAC address that have acquired
IP addresses by the DHCP server with the time that the lease for the IP address is up.
6219-X1 Router Users Guide 30
Loading...