RIDER-M
User Guide
Guilin Zhishen Information Technology Co., Ltd.
Contents
■Packing List ···················································································· 1
■Disclaimer and Warning ·································································· 2
■Quick Start Guide ··········································································· 7
■Camera Mounting ··········································································· 8
■How to Start Up ··············································································9
■Preparing and Charging the Batteries ············································· 10
■Introducing Gimbal Control Modes ················································· 11
■Connection Ports & Various Operations ·········································· 12
■Device Pairing & APP Operations ···················································· 13
■APP Download and Installation ······················································· 14
■Usage of Main Accessories ·····························································16
■Off-line Calibration ·········································································· 18
■Product Specifications ···································································· 20
■Warranty Card ················································································ 21
■Contact Card ·················································································· 23
Packing List
The product package comes with the following items. In case that any item is found missing, please contact
ZHIYUN or your local selling agent.
1 zhiyun-tech.com
RIDER-M 3-Axis
Gimbal Stabilizer
for GoPro
Camera Protection
Sticker for
Pan Axis Motor
Camera Mounting
Adapter
Battery Charger 1
Extension Rod 1
1
1
1
Video Output &
Charging Cable (4-pin)
Micro USB Cable 1
Camera Charging Cable 1
18350 Li-ion Battery 4
Storage Bag 1
1
Disclaimer and Warning
Thank you for using ZHIYUN RIDER-M. The information contains herein affects your safety and your legal
rights and responsibilities. Read this entire document carefully to ensure proper configuration before
use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or
bystanders, or damage to your device or property.
ZHIYUN reserves the right of final explanation for this document and all relevant documents relating to
RIDER-M, and the right to make changes at any time without notice. Please visit www.ZHIYUN-TECH.com
for the latest product information.
By using this product, you hereby signify that you have read this document carefully and that you understand
and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your
own conduct while using this product, and for any consequences thereof. You agree to use this product only
for purposes that are proper and in accordance with all terms, precautions, practices, policies and guidelines
ZHIYUN has made and may make available.
ZHIYUN™ accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from
the use of this product. Users shall observe safe and lawful practices including, but not limited to, those set
forth herein.
ZHIYUN™ is the trademark of Guilin Zhishen Information Technology Co., Ltd. (hereinafter referred to
as "ZHIYUN" or "ZHIYUN TECH") and its affiliates. All product names or marks referred to hereunder are
trademarks or registered trademarks of their respective holders.
Glossary
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product.
WARNING: Procedures, which if not properly followed, may incur property damage, grave accident, or serious
injury.
CAUTION: Procedures, which if not properly followed, may incur property damage and serious injury.
NOTICE: Procedures, which if not properly followed, may incur property damage or minor injury.
Reading Tips
Legends: Hints and tips Important.
2zhiyun-tech.com
Disclaimer and Warning
WARNING
Read the ENTIRE User Guide to become familiar with the features of this product before operating. Failure
to operate the product correctly can result in damage to the product or personal property and cause serious
injury. This is a sophisticated product. It must be operated with caution and common sense and requires
some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result
in injury or damage to the product or other property. This product is not intended for use by children without
direct adult supervision. DO NOT use with incompatible components or in any way otherwise as mentioned
or instructedin the product documents provided by ZHIYUN. The safety guidelines herein contain instructions
for safety, operation and maintenance. It is essential to read and follow all of the instructions and warnings in
the User Guide, prior to assembly, setup or use, in order to operate the product correctly and avoid damage
or serious injury.
Safe Operation Guidelines
CAUTION:
1)RIDER-M is a high-precision control device. Damage may be caused to RIDER-M if it is dropped or subject
to external force, and this may result in malfunction.
2)Make sure the rotation of the gimbal axes is not blocked by external force when RIDER-M is turned on.
3)RIDER-M is not waterproof. Prevent contacts of any kind of liquid or cleaner with RIDER-M. It is
recommended to use dry cloth for cleaning.
4)Protect RIDER-M from dust and sand during use.
NOTICE:
Keep the handle stable when RIDER-M is powered on, as shaking may cause failure to start up.
3 zhiyun-tech.com
Disclaimer and Warning
Battery Safety Guidelines
1. Prevent the batteries to come into contact with any kind of liquid. Do not leave batteries out in the rain or
near a source of moisture. Do not drop the battery into water. If the inside of the battery comes into contact
with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may
even lead to an explosion.
2. If the battery falls into water with the stabilizer during use, take it out immediately and put it in a safe and
open area. Maintain a safe distance from the battery until it is completely dry. Never use the battery again,
and dispose of the battery properly as described in the Battery Disposal section below.
3. If the battery catches fire, use water, water spray, sand, fire blanket, dry powder, or carbon dioxide fire
extinguisher immediately to put out the fire. Please extinct the fire by applying the methods recommended
above according to the actual situation.
4. Never use non-ZHIYUN batteries. If replacement or backup is needed, please purchase new batteries from
ZHIYUN's official website or authorized channels. ZHIYUN takes no responsibility for any damage caused
by non-ZHIYUN batteries.
5. Never use or charge swollen, leaky, or damaged batteries. Never use or charge if the battery smells, or
overheats (exceeding maximum temperature of 160 ° F / 71 ° C). If your batteries are abnormal, contact
ZHIYUN or a ZHIYUN authorized dealer for further assistance.
6. The battery should be used within the temperature range from -10 ° C to 50 ° C. Use the battery in
environments above 50° C can lead to a fire or explosion. Use of battery below -10° C can lead to serious
battery damage.
7. Do not use the battery in strong electrostatic or electromagnetic environments. Otherwise, the battery
protection board may malfunction.
8. Do not disassemble or use any sharp object to puncture the battery in any way. Otherwise, the battery may
leak, catch fire or explode.
9. Do not mechanically strike, crush, or throw the battery. Do not place heavy objects on the battery or
charger.
10. Electrolytes inside the battery are highly corrosive. In case of accidental contact of any electrolytes with
your skin or eyes, rinse immediately with water for at least 15 minutes and seek medical advice as soon as
possible.
11. Do not use the battery if it has been involved in a crash or heavy impact.
12. Do not heat the battery and never put the battery in a microwave oven or in a pressurized container.
13.Do not place the battery cell on a conductive surface (such as a metal desk surface).
14. Prevent use of wires or other metal objects that could cause positive and negative short-circuit to the
battery.
15. If the battery terminal is dirty, wipe it with a clean, dry cloth. Otherwise it will cause a bad battery connection,
which may result in energy loss or charging failure.
Battery Charging
1. Do not attach the batteries to a wall outlet or car charger socket directly. Always use a ZHIYUN approved
4zhiyun-tech.com
Disclaimer and Warning
adapter for charging. ZHIYUN takes no responsibility if the battery is charged using a non-ZHIYUN
charger.
2. Do not put the battery and charger near flammable materials or on flammable surfaces (such as carpet or
wood). Never leave the battery unattended during charging to prevent any accident.
3. Do not charge the battery immediately after use, because the battery temperature may be too high. Do
not charge the battery until it cools down to normal room temperature. Charging the battery with its
temperature over 40° C or lower than 15° C may lead to leakage, overheating, or damage.
4. Examine the charger before use, make sure there is no damage to the enclosure, cord, plug, or other
parts. Never use a damaged charger. Do not clean the charger with any liquid containing alcohol or other
flammable solvents. Disconnect the charger when not in use.
Battery Storage
1. Keep batteries out of the reach of children and pets.
2. Do not leave the battery near heat sources such as a furnace or heater, or inside of a vehicle on hot
days. Never expose the battery in any environment with temperature of over 60 ° C. The ideal storage
temperature is 22° C-28° C.
3. Store batteries in a dry environment.
4. Do not leave the battery unused for too long after it has been completely discharged to prevent overdischarge of battery which may result in battery damage and permanent failure.
Battery Maintenance
1. Never use the battery when the temperature is too high or too low.
2. Do not store the battery in any environment with a temperature of over 60° C.
Transportation Notice
1. Discharge the battery power to 5% or lower before carrying the battery on an airline flight. Only discharge
the battery in a fireproof location, ideally in a dry and open area.
2. Do not store or transport batteries together with metal objects such as eyeglasses, watch, and jewelries,
etc.
3. Do not transport damaged batteries. When transporting, be sure to discharge the battery to less than
50%.
Battery Disposal
Dispose of the battery in specific recycling boxes only after a complete discharge. Do not put away the
battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of
batteries.
NOTICE
Battery Use
Make sure the batteries are fully charged before each time of use.
Battery Charging
5 zhiyun-tech.com
Disclaimer and Warning
The battery will stop charging automatically when it is full. Disconnect the batteries from the charger when
fully charged.
Battery Storage
1. Discharge the battery to 40%-65% if it will NOT be used for over 10 days. This can greatly extend the
battery life.
2. The battery enters hibernation mode when voltage gets too low. Charge the battery will bring it out of
hibernation.
3. Remove batteries from the stabilizer when not in use and store them in a specialized container.
Battery Disposal
If the battery cannot be fully discharged, do not leave it in the recycling box, but contact a professional
battery disposal/recycling agent for further assistance.
This document is subject to change.
TM
ZHIYUN
is a trademark of ZHISHEN TECH.
Copyright © 2017-2018 ZHISHEN TECH. All rights reserved.
6zhiyun-tech.com
Quick Start Guide
Get to Know RIDER-M
Zhiyun-Tech Rider-M is a mini 3-axis gimbal stabilizer for GoPro and other action cameras. Highly compact
and featuring a 1/4"-20 threaded mounting hole on the bottom, the Rider-M can be conveniently mounted
on various support accessories, such as suction cups.
Camera Frame
Camera Mounting
Bracket
Thumb Screw
Battery Cover
18350 Battery
Cover Lock
Thumb Screw
3.5mm Video
Output Port
1/4" Threaded Hole
Tilt Axis Motor
Micro USB Port
Power Button
Battery Level
Indicator
MODE Button
7 zhiyun-tech.com
Camera Mounting
Push to mount the camera until it touches against the tilt
axis motor.
Rotate the Thumb Screws to tighten up the camera
mounting bracket.
Connect the stabilizer with the camera using the Camera
Charging Cable/Video Output & Charging Cable according
to actual operation need.
NOTICE: Do not power on the stabilizer before the
camera is properly mounted.
8zhiyun-tech.com
How to Start Up
Loosen the Cover Lock Thumb Screw and slide open the
Battery Cover. Install two 18350 batteries and slide back
the Battery Cover. Tighten up the Thumb Screw.
Long press Power Button for 3 sec. to power on. Long
press again to power off.
NOTICE: Do not power on the stabilizer before the camera is properly mounted.
9 zhiyun-tech.com
Preparing and Charging the Batteries
Before using RIDER-M for the first time, please fully charge the batteries to activate and ensure normal
operation by using the charger that comes in the package.
Name: Li-ion battery charger
Model: ZY-CH002
Input: DC 5V 800mA
Output: DC 4.2V 400mAx2
Charging time: 2h
Operating time: 5h
Charging Status Indicator
●
Charging
●
Charging complete
Micro USB Port (5V Power Input)
Input: DC-5V 800mA
Output: DC-4.2V 800mA
Please use and charge batteries provided or approved by ZHIYUN only. ZHIYUN will not take any
responsibility for explosion, fire and/or accidents caused by non-ZHIYUN batteries.
MIC Charging Cable (3-Pin)
18350 Rechargeable Batteries
10zhiyun-tech.com
Introducing Gimbal Control Modes
Pan
Following
Mode
Double Press MODE
MODE
Single Press MODE
Locking
Mode
Mode switch:The stabilizer enters Pan Following Mode by default each time when powered on. Switch into
Locking Mode by single pressing on the Joystick. Double press the Joystick to enter the Following mode.
Single press the Joystick under the Following Mode will return to the previous mode.
Pan Following Mode: The camera pans left/right following the
movement of the stabilizer while the tilt and roll axes are locked.
Roll Axis
Tilt Axis
Single Press MODE
Single Press MODE
Double Press MODE
Single Press MODE
Pan Axis
Following
Mode
Locking Mode:This mode locks movement of all three axes to
keep the camera still and stable.
Following Mode: The camera pans and tilts following the
movement of the stabilizer.
11 zhiyun-tech.com
Roll Axis
Tilt Axis
Pan Axis
Roll Axis
Tilt Axis
Pan Axis
Connection Ports & Various Operations
Micro USB Port
① Connectthe stabilizer toyour computer using theMicro USB cable forfirmwareupgrade and on-line
calibration.
② Connectthestabilizertoaspecializedwiredremotecommander.
NOTICE: This port cannot be used for charging.
Battery Level Indicator
Indicator Status Battery Level
Quick flash 4 times 75%-100%
Quick flash 3 times 50%-75%
Quick flash 2 times 25%-50%
Quick flash 1 times 1%-25%
12zhiyun-tech.com
Device Pairing & APP Operations
Video Output & Cam. Charging
A.Camera Charging: Users can charge the camera by connecting it with the stabilizer via the charging cable.
B.Video Output (for real-time display monitor)
1)Power up the stabilizer and connect the stabilizer with the camera using the Video Output & Charging
Cable.
2)Connect the stabilizer with a display screen using a 3.5mm Video Output Cable (purchase separately).
13 zhiyun-tech.com
Camera Charging Cable
Firmware Upgrade
1. Visit ZHIYUN's official website: www.ZHIYUNTECH.com.
2. Click to open the "Downloads" page, and find the
Firmware Upgrade Tutorial package.
3. Download the driver, calibration tool and latest
firmware corresponding to your stabilizer.
4. Upgrade firmware following the instructions
indicated in the Firmware Upgrade Tutorial.
Video Output &
Charging Cable
APP Download and Installation
APP Download
Download the APP from the “Downloads” page on ZHIYUN's official website www.
zhiyun-tech.com, or by directly scanning the QR code on the left (Android 5.0 above
or iOS9.0 above required) to download. Users can download the APP by searching
"ZY Play" in Google Play or APP Store.
The ZHIYUN APP is subject to regular update, try out now to discover more
functions.
1.Power on the stabilizer.
2.Activate Bluetooth on your smartphone.
3. Tap ZHIYUN's APP icon to open.Tap the signal icon on top of the monitroing screen, search for nearby
signals, and choose your stabilizer to connect.
14zhiyun-tech.com
APP Download and Installation
APP Operations
Gimbal Control
Activate remote control of the stabilizer by taping the “Power” icon on the top left. This section
allows various controls to the stabilizer, including change of Gimbal Control Mode and corresponding axis
movement control, etc.
Gimbal Calibration
Calibration is required when deviations are found in
the 3 axes and the leveling of the camera. Tap "Start
Calibration", and complete the 6-side calibration
procedure following onscreen illustrations.
15 zhiyun-tech.com
Gimbal Settings
Allows adjustment of various parameter settings of
the stabilizer (Refer to APP instructions for specific
operations.)
Usage of Main Accessories
ZW-B02 Wireless Remote Control(purchase separately)
Charging Indicator
MODE Button
Power/Shutter
(Dual-function button)
Bluetooth Indicator
MODE Button:
Power/Shutter (Dual-function button):
Power on/off:
Power on/off the remote controller by pressing the Power button for 1 to 2 sec.
The indicator light will turn on/off accordingly.
To ensure successful camera control through the stabilizer, it is essential to use the right camera control
cable and make proper connection. This function is only available for Cannon and Panasonic cameras.
Combined Button Control
Power Button + Shifter Lever:
to enter Slave Mode. This allows firmware upgrade of the remote controller through mobile APP (requires
Bluetooth pairing with the smartphone using “ZY Play” ).
Power Button + MODE Button:
quick pairing with the nearest stabilizer.
Joystick:
Shifter Lever:
Switches between gimbal control modes (works like the MODE button on the stabilizer).
Push the Shifter Lever in W direction simultaneously when powering up
Press the MODE Button simultaneously when powering up to operate
Controls camera movement .
Allows focusing control of the camera.
Shifter Lever
Joystick
Power Level Indicator
16zhiyun-tech.com
Usage of Main Accessories
108.8mm
Specifications:
Charging voltage: 5V
Charging current: 100mA
Theoreticalworktime:≥ 30hr.
Built-in Polymer lithium battery capacity: 150mAh
Emission and received current: 11.9mA
Operating current: 4.2mA
Effective control distance: 10m /394 inch
(without blockage)
Bluetooth Indicator
No connection: Continuous flashing.
Connected: Shines solid light.
108.8mm
17 zhiyun-tech.com
Power Level Indicator
90%-100%: quick flash for 4 times each second.
75%-90%: quick flash for3 times each second.
55%-75%: quick flash for2 times each second.
30%-55%: quick flash for1 time each second.
0%-30%: quick flashing.
Charging Indicator
Charging: ●RED light.
Charging complete: ●GREEN light.
78.5mm
Off-line Calibration
or
or
or
Off-line Calibration
Calibrate the stabilizer when any of the following circumstances occurs:
1. Deviation is found in the balancing of the camera even after initialization.
2. The stabilizer has not been used for a long time.
3. The stabilizer is exposed to severe temperature change (Calibration is required, as excessive temperature
differences in operation environments may affect various parameter indexes of the inner part of the built-in
gyroscope).
Calibration Procedure:Users may choose either wireless or wired remote control (purchase separately) to
operate calibration according to actual situations.
① Power upthestabilizer. Connect theremote
control to the stabilizer.
② Pushthe Joystick up(or press the UPbutton)
for one 1 sec. until the stabilizer’s Battery Level
Indicator shines solid light.
③ Pushthe Joystickdown (or press theDOWN
button) for one 1 sec. until the Indicator starts
flashing (once each second). Now, it is ready
for calibration.
18zhiyun-tech.com
Off-line Calibration
Six-side Calibration
NOTICE: Pay attention to the position and orientation of the mobile clamp when doing calibration.
① Laythe stabilizer stillona
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 2 times each
second.
④ Laythe stabilizer stillona
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 5 times each
second.
19 zhiyun-tech.com
② Laythe stabilizerstillon a
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 3 times each
second.
⑤ Laythe stabilizer stillona
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 6 times each
second.
③ Laythe stabilizer stillona
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 4 times each
second.
⑥ Laythe stabilizer stillona
surface with the Mobile Clamp
facing backward, until the
Indicator shines solid light.
Calibration complete!
Product Specifications
Specifications
Min Standard Max Remarks
Input Vol. 6.8V - 12.6V
Operation Current 50mA 80mA 3000mA
Camera Charging
Voltage
Camera Charging
Current
Following Deviation in
Static State
Following Deviation in
Motion State
Tilt Angle Range 320° Gimbal in Vertical
Roll Angle Range 270°
Pan Angle Range 640° Gimbal in Vertical
Tilt Axis Following Speed 1° /S
Pan Axis Following
Speed
Battery Runtime -10° C 25° C
Operation Temperature 3.5h 4.5h 5.5h
Weight 180g
4.5V 4.9V
- 800mA -
±0.01 -
±0.05 ±0.1
1° /S
5.1V
±0.05
±0.4
50° /S
80° /S
45° C
20zhiyun-tech.com
Warranty Card
Warranty Period
1. Customers are entitled to replacement or free repair service in case of quality defect(s) found in the
product within 15 days upon receipt of the product.
2. Customers are entitled to free repair service from ZHIYUN for any product proven defective in material or
workmanship that results in product failure during normal consumer usage and conditions within the valid
warranty period, which is 12 months counting from the date of delivery.
3. Some states or countries do not allow limitations on how long an implied warranty lasts, so the above
warranty term may not apply to you.
This warranty does not apply to the followings
1. Products subjected to unauthorized repair, misuse, collision, neglect, mishandling, soaking, accident, and
unauthorized alteration.
2. Products subjected to improper use or whose labels or security tags have been torn off or altered.
3. Products whose warranty has expired.
4. Products damaged due to force majeure, such as fire, flood, lightning, etc.
Warranty Claim Procedure
1. If failure or any problem occurs to your product after purchase, please contact a local
agent for assistant, or you can always contact ZHIYUN's customer service through email at
service@zhiyun-tech.com or website at www.zhiyun-tech.com.
2. Your local agent or ZHIYUN’s customer service will guide you through the whole service procedure
regarding any product issue or problem you have encountered.
3. ZHIYUN reserves the right to reexamine damaged or returned products.
21 zhiyun-tech.com
Warranty Card
Customer information
Customer Name : Contact No :
Address :
Sales Information
Sales Date : Prod. Serial No :
Dealer
Contact No :
#1 Maintenance Record
Service Date : Signature of Repairman :
Cause of Problem :
Service Result : □ Solved □ Unsolved □ Refunded(Replaced)
22zhiyun-tech.com
Contact Card
Website Weibo
Google+
Youku
Tel: +86-773-2320856
Web: www.zhiyun-tech.com
E-mail: service@zhiyun-tech.com
Address: Creative Industrial Park,GuiMo Road,QiXing District,Guilin 541004,Guangxi,China.
23 zhiyun-tech.com
Facebook
Youtube
Vimeo
Wechat
Certificate of Quality
This product is confirmed to meet quality standards and
permitted for sale after strict inspection.
QC Inspector:
Please download the latest version from www.zhiyun-tech.com
This document is subject to change.
ZHIYUN™ is a trademark of ZHISHEN.
Copyright © 2017-2018 ZHISHEN. All rights reserved.
V2.00
Loading...