10. General Precaution ----------------------------------------------------------------------------------- (25)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Z
* Revision History
www.panelook.com
Date
Sep
27,
2010
Rev.
No
000allFirst issued
PageSummary
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
[
www.panelook.com
General Description
Description
ZXXS820-L06 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 82.0“ is
1920 x 1080 and this model can display up to 16.7 million colors with wide viewing angle
of 89¶ or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD
TV, Display terminals for AV application products, and Digital Information Display (DID).
Features
RoHS compliance (Pb-free)
High contrast ratio, High aperture ratio, High luminance
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (·178¶)
High speed response
Portrait / Landscape type compatible
Wide UXGA (1920 x 1080 pixels) resolution (16:9)
Low power consumption
Direct Type 88 CCFTs(Cold Cathode Fluorescent Tube)
DE(Data Enable) mode
LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
\
www.panelook.com
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
ItemSymbolMin.Max.UnitNote
Power Supply VoltageV
Storage temperatureT
Glass surface
CenterT
DD
STG
CENTER
GND-0.513.2V(1)
-2060
050
temperature
(Operation)
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ˺ 39 ¶C)
b. Relative Humidity is 90% or less. (Ta > 39 ¶C)
c. No condensation
T. Uniformity
T
-10
(2)
(2),(3)
Fig. Temperature and Relative humidity range
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
]
sjkGt
(5) Definition of test point
\
www.panelook.com
\
X
\
Y
T should be less than 10 (T = |T
T
CENTER
: Temperature of the center of the glass surface
CENTER
–T
(Test point 5)
T
CORNER
: Temperature of each edge of the glass surface
(Test point 1~4)
[Z
2. Application information for DID (Digital Information Display)
A long-term display like DID application may cause uneven display including image retention.
To optimize module's lifetime and function, several operating usages are required.
CORNER
| )
1. Normal operating condition
- Temperature: 20 · 15
- Humidity: 55 · 20 %
- Display pattern: moving picture or regular switchover display
Note) Long-term static information image may cause uneven display.
2. Operating usages under abnormal operating condition. Note (1)
a. Ambient condition
- Well-ventilated place is recommended to set up DID system.
b. Power off and screen saver
- Periodical power-off or screen saver is needed after long-term static display. Note (2)
3. Operating usages to protect uneven display due to long-term static information display
a. Suitable operating time for B-DID : under 12 hours a day.
b. Periodical display contents change from static image to moving picture.
- Liquid crystal refresh time is required.
c. Periodical background color and character (image) color change
- Use different colors for background and character (image), respectively.
- Change colors periodically.
d. Avoid combination of background and character with large different luminance.
Note (1) Abnormal condition means every operating condition except normal operating condition.
Note (2) Moving picture or black pattern is strongly recommended for screen saver.
4. Lifetime in this spec is guaranteed only when DID is used under right operating usages.
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
^
www.panelook.com
3. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
ItemSymbolConditionMin.Typ.Max.UnitNote
Contrast Ratio
(Center of screen)
Response
Time
G-to-GTg-TBDmsec
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Red
Green
Blue
White
(Ta = 25 · 2¶C, VDD= 12V, fV= 60Hz, f
DCLK
C/R15002000-
Y
L
4003000-cd/m
Normal
Rx0.654
Ry0.336
Gx0.272
Gy0.610
Bx0.145
TL,R=0
TU,D=0
Viewing
Angle
TYP.
-0.03
By0.060
Wx0.280
Wy0.290
= 74.25MHz, IL= 11.0 mArms)
(3)
SR-3
(5)
BM-7
2
TYP.
+0.03
(6)
SR-3
(7),(8)
SR-3
Color Gamut--77-%
Color Temperature--10,000-K
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
T
L
T
R
T
U
T
D
B
uni
C/R˻10
7589-
7589-
Degree
7589-
7589-
--25%
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the backlight at the given temperature for stabilization
of the backlight. This should be measured in the center of screen.
(7)
SR-3
(7)
SR-3
(8)
SR-3
(4)
SR-3
Single lamp current : 11.0 mA
Environment condition : Ta = 25 · 2 ¶C
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
_
ྛ
ྞ
ྡྠྟ
ྜྜྷ
ྚ
ྙ
www.panelook.com
Photo detectorField
SR-31ദ
BM-72ദ
TFT - LCD Module
Note (2) Definition of test point
180540900
Photo
detector
Field
SR-3 : 50
BM-7 : 50
LCD Panel
The center of the screen
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel
G
CR
/
max
G
min
0
2
3
960
1600
Active Area
Test Point
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
ZXXS820-L06
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.