Zhengzhou ZXY-6020S OPERATINGMANUAL

OPERATING MANUAL
ZXY-6020S
Programmable Power
Supply
Zhengzhou Ming He Electronic Technology Co., Ltd.
December 2013

Contents

3.1 Brief introduction............................................................................................ 1
3.2 Main function.................................................................................................. 2
4.1 Panel Introduction.......................................................................................... 4
4.2 Introductions for keys.................................................................................... 5
5.1 Quick start guide............................................................................................ 5
5.2 Detail operating instructions.........................................................................7
6. Cautions................................................................................................................. 12
7. Warranty and service .......................................................................................... 12
ZXY-6020S Programmable Power Supply
1

1. Contact

Address: No.96 Rui Da Rd., Zhengzhou, China
Tel: 86-371-86106382
Fax: 86-371-86106382
Zip: 450001
E-mail: sales@mhinstek.com
Website: www.mhinstek.com

2. Inspecting Package Contents

When you get a new ZXY-6020S Programmable Power Supply, please inspect
the instrument as follows:
2.1 Check if there is damage due to transportation
If the package is damaged, please retain them until the instrument and
accessories are tested.
2.2 Check package contents
Contents of the case are as bellows, if the content does not match with the
packing list or the instrument is damaged, please contact us.
ZXY-6020S Programmable Power Supply 1pc
User manual(pdf) 1pc
2.3 Check the machine
If the machine was damaged; did not work properly or failed to pass
performance tests, please contact your dealer or our company.

3. Summary

3.1 Brief introduction

ZXY-6020S is single output programmable switch power supply. Its
ZXY-6020S Programmable Power Supply
2
specification is 60V, 20A, 1200W. It is designed by DC-DC modularization.
Small size and high output power. Besides, it is equipped with TTL serial
interface, provide a serial communication protocol, support secondary
development. We can provide versatile solutions according to your design and
test requirements.

3.2 Main function

Based on BUCK structure of switch power supply technology, the work
frequency can reach to150 KHZ
DC input voltage range: 13V~ 62V, which is suitable for multiple kinds of
pre-stage input power supplies
Combined with the operating buttons and multifunction encoders, it is
convenient and easy to use
High accuracy and high resolution: 10 mV / 10 mA
Low ripple and low noise
Indicator light: constant current( CC), constant voltage (CV) and output
state (ON)
LCD1602 display
Adjust voltage and current by adjustment knob and keys
Support measuring and displaying output voltage, output current, output
power, output electric quantity (AH) and working time
Intelligent temperature detection, can connect an external DC12V fan,and
control its speed in level 5
The minimum pressure differential is 2V, the module can still work steadily
under the circumstance
With output turn off function key, users can turn on or off the output
flexibly
10 groups of parameter settings of M0-M9, which can be conveniently
called out at any moment
Prompt for operation or alarm function of onboard buzzer
Convenient and simple three-phase charge intelligent control function of
storage battery
With TTL serial communication, and improved communication protocol so
ZXY-6020S Programmable Power Supply
3
Item
Parameter
Input Voltage
13V62V
Output Voltage0~
60V
Output Current0~
20A
Output power
0~1200W
Setup resolution of output voltage
10mV
Setup resolution of output
current
10mA
Source regulation
CV is less than 0.5% + 10 mV,
CC is less than 1% + 5 mA
Load regulation
CV is less than 0.5% + 10 mV
CC is less than 1% + 5 mA
Output ripple
< 50mVpp (Input 54 V, 12 V output, current 8A)
Volatility transmission ratio of
100 Hz
< 1/10000
Typical efficiency
88%(Input 54 V, 36 V, output current 8 A)
The display precision of
Voltage, Current
10mV, 10mA
Display error of Voltage
±1%+50mV
Display error of Current
±2%+20mA
Response time
< 50ms
Memory operation
10 groups of parameter storage of M0-M9
Protection type
OTP, OVP, OCP, OPP, OAH, OFT
Heat-dissipating method
heat dissipater and fan (optional)
Operating ambient temperature
0~40
Storage ambient temperature
-2070
as to be convenient for centralized control
3.3 Technical data
+ 10 hidden pages