Zhejiang Yankon Group YKH001 User Manual

Model YK-Smart-H001

Name Intelligent gateway

Funcon On/Off/Bluetooth control

Input Rang 120V, 60Hz, 1.5W, CLASS II

Standards WIFI 802.11 b/g/n

Bluetooth Version BLE4.2

Standards BLE 802.15.1

User Guide

1.Download the Energec Lighng App from the APP Store or from Google Play.

Create an account and enter into the APP.

2. Turn on the WIFI and Bluetooth on the phone. Tap “+” in the top-right corner of the app and

then select “search device”.

3. Power on the hub, and the LAN light starts to blink.

4. The hub will be detected and appear in the app. Tap on the icon, enter WIFI name and password,

tap “confirm” and wait unl it is added successfully..
(Only works with 2.4GHz WIFI networks. Not compable with 5GHz WIFI networks.)

Modèle YK-Smart-H001

Nom Passerelle intelligente

Foncons Allumer/éteindre/Contrôle bluetooth

Tension d'entrée nominale 120 V, 60 Hz, 1.5 W, CLASSE II

Normes WIFI 802.11 b/g/n

Version de Bluetooth BLE4.2

Normes BLE 802.15.1

Guide d'utilisation

1.Téléchargez l'application Energetic Lighting App à partir de l'APP Store ou Google Play. Créez
un compte et accédez l'APP.

2. Allumez le WIFI et le Bluetooth sur le téléphone. Tapez sur « + » dans le coin supérieur droit
de l'application, puis sélectionnez « recherche d'appareil ».

3. Mettez le concentrateur sous tension et le voyant LAN commence à clignoter.
4 .Le concentrateur sera détecté et apparaîtra dans l'application. Tapez sur l'icône, saisissez
le nom WIFI et le mot de passe, tapez sur « confirmer » et attendez qu'il soit ajouté avec succès...
(Fonctionne uniquement avec les réseaux WIFI 2,4 GHz. Non compatible avec les réseaux WIFI 5 GHz.)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Caution: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) This device may not cause interference.(2) This device must accept any interference,
including interference that may cause undesired operation of the devic

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.

NOTE:

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and found to comply with the limits for a Class B digital device,