Zhangzhou Lilliput Electronic Technology 339 User Manual

FPV MONITOR

User Manual

Important Safety Instructions:

z Please read User Guide before using this product.
z Please keep User Guide for future reference.
z Please read the cautions to prevent possible danger and loss of property.

Contents

FEATURES .................................................................................................................. 2

CAUTIONS .................................................................................................................. 2

INITIAL SETUP .......................................................................................................... 3

PRODUCT DESCRIPTION ....................................................................................... 4

AERIAL PHOTOGRAPHY SIGNAL RECEIVER ................................................. 6

WIRING INSTRUCTIONS ........................................................................................ 7

MENU SETTING ........................................................................................................ 6

PAPAMETERS ........................................................................................................... 10

TROUBLE SHOOTING ........................................................................................... 10

YP-01150116

1

FEATURES

¾ High resolution: 1280×800;
¾ High brightness: 400cd/㎡;
¾ High contrast: 800:1;
¾ Dual 5.8GHz receivers for optional;
¾ Channel auto searching;
¾ Auto antenna switching to get best signal;
¾ Multiple Picture-in-Picture (PIP) modes;
¾ 4-hour timer & alert indicator.

CAUTIONS

¾ Please do not place the display screen towards the ground.
¾ Please avoid heavy impact or drop onto the ground.

¾ Please do NOT use chemical solutions to clean this product. Please wipe

with a clean soft cloth to maintain the brightness of the surface.

¾ Please do not block any vent hole and antenna port.
¾ Please follow the instructions and trouble-shootings to adjust the product.

Other improper adjustment may result in damage. Any further adjustment
must be performed or conducted by a qualified technician.

¾ Please unplug the power and remove the battery if long-term no-use, or

thunder weather.

2

INITIAL SETUP

 Unpacking

Carefully unpack the monitor and verify that the following items are included:

z Monitor
z Sun shade
z AV input cable
z AV output cable
z 12V DC adapter
z 5.8G receive antenna
z 2600mAh built-in battery
z Manual

Inspect the unit for any physical damage that may have occurred during shipping.
Should there be any damage, please immediately contact us.

 Optional Accessories

Additional accessory options for extra requirements. (Available at additional cost)

z VESA battery plate + Battery plate
z HDMI cable
z 5.8GHz omnidirectional antenna
z FPV double-rod bracket
z FPV single-rod bracket
z Shoe mount

Tips: Recommend using our company's original accessories to prevent device

from damage.

3

PRODUCT DESCRIPTION

1. AUTO: channel auto searching

2. PIP: picture-in-picture mode.

3. A/V: video& 5.8G switch.

4. HDMI: switch to HDMI state.

5. Battery indicator

Status 1: the indicator light turns to fully red when battery charging.
Status 2: the indicator light turns to half red when powered with DC

power, but not with battery.

Status 3: the indicator light turns to off when charge completely or

use only with battery.

6. M/E: to activate OSD (on-screen display) menu.

Select switch the brightness, contrast, saturation, Tint, sharpness,
volume, MENU and Exit.

7. < Left selection key, to select items on OSD menu and value
option adjustment:

Press to adjust the brightness, contrast, saturation, Tint, sharpness
and volume value decrease.

8. > Right selection key, to select items on OSD menu, value

option adjustment and confirmation:

Press to adjust the brightness, contrast, saturation, Tint, sharpness
and volume value increase.

9. ENTER.

4