1
Smart Tracking Watch
User Manual
Model: S88 S866
2
1. Product Description
Features of GPS Tracking Watch
2. Interface and Appearance
(1) Appearance
1. Microphone
2. SOS
3. Display
4. SIM card slot
5. Speaker
6. USB port
7. TEL1 button
8. Reset hole
9. Power button
10. TEL2 button
(2) Screen icon descriptions
GPS/LBS/WiFi (optional) positioning
modes
SOS
Family number fast dialing
GEO fence
Online positioning
History track playback
Two-way call, remote monitoring
Pedometer
Synchronize the weather
Call vibration
Looking friends
3
GPS activated GPRS Battery Status
Pedometer Network Signal Time
(3) Install SIM card
1) Before installing the SIM card
A. It is recommended that you wear the watch, go to outdoor open areas, long press "Power" button for around 3
seconds to boot; Wait about 1 minute, the watch with GPS function will automatically use the GPS Time Giving (time
accurate to 0.01 second).
B. Lighten the screen to view time, date, day and weather.
C. Under standby mode, long press "Power" button for 3 seconds, the watch will automatically shut down.
2) Install SIM card
A. In the power off state, insert the micro SIM card in the direction shown in the figure (make sure the SIM card is
enabled with functions of Caller ID display, sending and receiving SMS, and GPRS)
As the picture shows:
Push the SIM card carefully until you hear a click. The card will be fastened in the watch.
4
B. Long press "Power" button about 3 seconds to boot, the watch will synchronize to the server in around 1 minute
when network is normal.
(4) Watch functions and operation methods
Switch on: Long press the power button and release it after 3 seconds
Switch off: After removing SIM card, long press the power button and release it after 3 seconds. When SIM card is
inserted, you can try to turn off by Reset button.
Pedometer: When the watch is switched on, the pedometer function is automatically activated, and the counting
steps are cleared at 24:00 everyday.
Emergency call: Long press SOS button, the watch will dial SOS number (SOS number is the administrator number set
at the first time).
Family number 1: Long press TEL1 button, the watch will dial family number 1 (second set number after
administrator number); Press the TEL1 button to enter the phonebook where you can set multiple numbers. Select
and dial the desired phone number by pressing the TEL1 button.
Family number 2: Long press TEL 2 button, the watch will dial the family number 2 (second set number after
administrator number); Press TEL2 button to enter the voice chat interface where you can choose any contact for
voice chat.
Reset: When the watch does respond or cannot turn it on, you can try to reset it by pressing the Reset hole.
3. Apps for mobile phones
(1) App Download
Method 1: Use Android phone/iPhone to scan the QR code as follows, download the app and install it.
Loading...