ZGEMMA H7 User Manual

BC-4400H10011
ZGEMMA H7
4K-HEVC Advanced Linux STB
ZGEMMA H7
ZGEMMA H7
9
1.LNB I N/LOOP OUT: One satellite cable can be connected
2.RF IN / LOOP OUT: Connect to Terrest rial cabl e or Cable TV
3.A/V:C onnect to TV using AV cable.
9
2.5A/ 12V
8
5
6.USB :USB3.0 a nd USB2.0
7.ETH EERNET:On e Ethernet cable
1
2
3
4
1.
2.
3.
5.Smartcard reader
6.Common Interface
ZGEMMA H7
ZGEMMA H7
one
1凵.:
2abc
2abc
3def
1凵.:
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0,?!
NEXT>
<PREV
BACK
INFO
EPG
EXIT
MENU
FILE LIST
PAGE
CH
VOL
TEXT
AUDIO
SUBTITLE
TV
RADIO
TIMER
SLEEP
HELP
FAV
V.MODE
▎▎
POWER
Press to turn the product on or standby
MUTE
Press to mute the audio or un-mute
Numeric Keys
Press to enter a channel number or nmbers according to the menu options
PREVIOUS
Press to go to Previous Page
BACK
Press to return to the previous service or Menu
Navigation Keys
Press to navigate up/down and left/right on
the menu options. up/down keys are used to call up the channel list
EXIT
Press to exit the current menu option into
the live mode, or switches one step back of the menu.
Volume +/-
Press to adjust the audio volume
TEXT
Press to display the teletext information of the current channel, if the channel provides teletext data.
TV
Press to display the TV channel list
Color Keys
RED,Green,Yellow & Blue Each key is assigned
manu
Recording[ ]
Press to start or stop recording media
Press to stop playing media
STOP[ ]
Play/Pause[ ]
ing)at the normal speed or pause the live program or recording play
Previous Program[ ]
Press to move to previous program
Next Program[ ]
Press to move to Next program
TIMER
Press to view the Timer Schedule
Fast Rewind[ ]
Faster rewind than the normal speed
Fast Forward[ ]
Faster forward than the normal speed
SLEEP
Press to turn off the product sleep timer by user
NEXT
Press to go to Next Page
INFO
Press to view the Program information
OK
EPG
Press to display the EPG(Electronic Program Guide) information if the channel provide
Channel(Page) up/down
Press to navigate through the scanned channel list or move the channel/program list in pages
MENU
FILE LIST
Press to main menu
Press to display the list of recordings stored on the extenal HDD if any
AUDIO
SUBTITLE
PORTAL
RADIO
Press to select available audio language and audio type
Press to display the subtitle of the current channel, if the channel provides subtitle data
Press to go to Portal menu
PORTAL
Press to display the Radio channel
V.MODE
FAV
HELP
Press to change the display output ratio: Wide Zoom or Original
Show the Favorite Lists available
Press to display major important operation methods. This provides users with a quick guide of product
ARM Bra hma 15 Dual Core 150 0Mhz Linux O per ating System Media P lay er Downl oadable Plug-in s supported Smart car d Reader Commo n Int erface slot Suppo rt 4K -2160p MPEG2 /H. 264 and H.265 HD HEVC /H. 265 2160p60 Ma in-10 multi- for mat decoder
Twin det ach able tuner for D VB-S2 and/or DVB- C/T2 Tuner
4GB Emm c NAN D Flsah/1024 MB DDR Memory
Inter nal 2 .5'’ HDD Sata bracket
1 Gbit Et her net Interfac e
USB 3.0 a nd US B 2.0 HDMI 2. 0
Compo sit e video with dig ital audio SPDIF for di gital bit stre am out(optical)
EPG sup por ted
Autom ati c & Manual Servi ce Scan supported
Multi ple L NB control (Di SEqC) supported
Skin ch ang e supported Stabl e pow er adaptor (ex ternal)
DiSeqC 1.2
SAT-IN 1 and 2 port C able- IN 1and 2por t
Terrest rial DVB-C/T /T2
1GHz DVB-C tuner
Yes (1Gbit )
USB 3.0
Yes (Rear,1 port)
Common Inte rface
Optical Output
,2160p
ARM Brah ma15 1500Mhz
1024MB
NOR 8MB
eMMC NAND 4GB
Linux version >4.0
WMA
DTS
VC-1
AP@L3
H.264
3
2160p 60fps
WMV9
MP@HL
AC Adaptor(+12V/2.5 A)
Ethernet
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
1Gbit
optical
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
There are several ways to turn your ZGEMMA H7 ON or OFF.
p
r
o
v
i
d
es va
r
ious la
n
g
uage
s a
nd he
r
e
ZGEMMA H7 Use UP/DOWN key to scroll up
you can choose the main language for your
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
o
ZGEMMA H7
ZGEMMA H7
ZGEMMA H5.2S
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
I
Smartcard slots.
ZGEMMA H7
www.zgemma.tv
ZGEMMA
H7
Power up the ZGEMMA H7 When the LED shows “USB”,press power button.After about 1 minuties, upgrade will complete. Then ZGEMMA H7 reboots automatically.
/zgemma/h7 direcyory. /zgemma/h7/noforce /zgemma/h7/imageversion
/zgemma/h7/disk.img
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
ZGEMMA H7
26
TROUBLESHOOTING
Before you contract your local service center, please read the following tips carefully. NOTE: if the antenna is covered with snow or on the RF signal is weakened by heavy rain, the quality of audio an video may become temporarily poor. If you experience poor audio and video quality due to bad weather conditions, please check if your satellite antenna is oriented in the original direction. And see if it is covered by snow. Also, check if your LNB is not damaged.
1.No video on TV Check first if the product is powered on and in operation mode. Check if the video cable is properly connected between TV and ZGEMMA H7. Check if the satellite cable is properly connected to ZGEMMA H7. Check if the selected channel is currently on air. Check if the selected channel is encrypted and if you have a corresponding access smartcard.
2.Problem with audio quality Check if your audio cable is connected correctly. Check the volume level of your TV and the product. Check if the product or TV and the product. Check if the product or TV is on mute. Check the audio option if it is correctly selected for the program that you are currently watching.
3.Remote control problem Check if the batteries are correctly mounted. If your remote control has been used for long, change the batteries. Point the remote control directly toward the product. Make sure that nothing blocks the front panel display.
4.Channel search problem Make sure if tuner configurations are all correctly made. Check if the antenna cable(s) are properly connected.
5.Encrypted channel viewing problem Check if you have the appropriate Smartcard and/or CAM. Take the Smartcard and CAM out and re-insert them to re-initilize. Check if your system correctly detects the smartcard and CAM.
6.Recording problem Check if the HDD has a sufficient space for recording. Check if there is a conflict between recording timer.
7.Noise When HDD is running, you may hear a noise.
Loading...