VEHICLE FLASHER
OBD-II STALK • FORD VEHICLES
USER MANUAL | V1.2
INSTALLATION
The Z-Flash is a true plug and play system and works right out
of the box!
• Connect the module into the vehicle’s OBD-II port. The OBD-II
port is located on the dash board under the steering wheel.
• Turn the vehicle on or into the run position.
• The module will begin to boot and the red LED with flash
for 5 seconds.
• When the module is ready to use red LED will flash.
• If you need to disconnect the module and need to plug it
back in you will need to follow the boot sequence again.
OPERATION
Normal Operation:
The module requires no external switches and can activate with the high beam stalk.
• Pull and hold the high beam stalk for 5 seconds.
• When the turn signals and high beam dash indicators begin flashing the module is active.
• To turn the module off pull the high beam stalk back for 2 seconds
Jump in Activation:
• When entering the vehicle pull the high beam stalk back while starting the vehicle.
• The lights will immediately turn on when the vehicle starts
WARRANTY:
- This warranty protects the product(s) specified to be free from defects in material and workmanship
for 1(one) year. During the warranty period we will, at our sole discretion, repair or replace the
product(s). This limited warranty does not cover travel expense or labor charges for the removal and
reinstallation of the product, or any other charges alike. We are not responsible for incidental damages,
including but not limited to: loss of time, loss of work, inconvenience, loss and/or damage to personal
property, shipping expenses. We are in no way responsible for any loss or any indirect or consequential
damages resulting from any such defect in material and/or workmanship whether it’s due to negligence,
incorrect installation, or manufacturer mistake. It is the sole responsibility of the party initiating a
warranty claim to pay shipping charges associated with returning a product.
WARNING:
- If you do not know what you are doing, do not try.
- We advise professional installation for all products.
- Electrical shock can cause injury or death. Please use proper tools and protection when installing.
Professional installation is strongly advised.
- Please check for correct installation method before powering on. Electrical fire can occur.
- Do not run any wires in the way or air bags or other safety devices.
COMPATIBILITY
F-150 11-18
F-250 11-18
F-350 11-18
F-450 11-18
F-550 11-18
Fusion 15-18
Expedition 16-18
Explorer 11-18
Taurus 15-18
Edge 15-18
Mustang 15-18
Ecosport 18
Loading...