ZT-CP3 Zeta Conventional Manual Call Point Range
This unique manual call point mimics the feel of breaking glass whilst offering the user the benets and safety advantages of a
glass-free resettable operating element. Once activated a warning ag drops in to view easily identifying the call point that has
been operated .A key can the reset the unit. The call point provides an ideal solution for most conventional re alarm systems.
It is ideal for industries that are sensitive to broken glass as well as areas that suffer from a high number of false activation s
such as; schools, shopping centres and other public places.
Wall Plate
Cover
Operating
Element
ReSet Key (1)
provided
ReSet Call Point Surface Mounting
Back Box (Colour Matched)
(Optional)
Screw No. 8 x 1.5
(2) provided
(Surface Models only)
Flush Mounting
Surface Mounting
Screw 3.5 x 3.5
(2) provided
(Flush Models only)
S
u
rface Mountin
1
2
Dia B.
Step 1
Carefully attach the ReSet Call Point to the
top of the back box (Dia A.) and hinge down
to the points where the cover rests on the top
of the clip (Dia B.)
Step 2
Firmly push down on the cover to engage with
clip. This should create a positive clicking
sound which ensures that the clip has been
correctly engaged (Dia C.)
NB: If unsure if the clip has engaged with the
back box, *IMPORTANT* release the cover
following Step 3. When back in the position
demonstrated in Dia B. repeat Step 2.
Dia C.
Step 3 - Detaching the cover from the
back box
1. Insert key into the bottom of the ReSet
cover
2. Keep the key inserted and with your hand
pull the cover towards you (Dia D.)
Dia A.
Methods of mounting
A
Dia D.
Flush Installation
The call point is provided with a wall plate that is
designed to t directly onto a standard UK single
35mm deep ush box.
Secure the wall plate to the ush mount box with
the screws provided. Carefully attach the call
point to the top of the wall plate and hinge down
to snap securely into place.
Surface Installation
NB: For security reasons the call point is
deliberately difcult to remove from the back
box once tted. Please ensure that the call
point is installed correctly before snapping
closed.
The call point can be supplied with its own
surface mounting back box, 20mm entry holes
can be easily cut using the template provided on
each pack box. (See illustration below).
With the screws provided, x the back box to the
wall. Carefully attach the call point to the top of
the back box, hinge down to snap securely into
place.
87 mm 23 mm
COVER
OPERATING ELEMENT
35 mm 87 mm
87 mm
BACK BOX
Dimensions
ZT-CP3 Zeta Conventional Manual Call Point Range
Specications
Current Rating
3 Amps 12 - 24V DC
3 Amps 125 - 250V AC
Housing and Mounting Box Material Polycarbonate
Electrical Contact Material Silver plated brass
Operating Temperature -10°C to +55°C
Installation Terminal Conductor Size 0.5mm to 2.5mm
Humidity (no condensation)
Specications are typical and given at 25°C
0 to 95%
Relative humidity
IDRESET-RS2-ZT-CP3 - REVISED 03/17-014-PRINTED IN ENGLAND
1
2
3
4
470
680
Connection Options
Terminal Congurations
Terminal conguration for
Product Codes:
ZT-CP3/F
ZT-CP3
ZT-CP3/B
ZT-CP3/W
ZT-CP3/Y
Terminal Congurations
Terminal conguration for
Product Codes:
ZT-CP3/G
Zeta Alarms Limited
Detection House • 72-78 Morfa Road • Swansea • SA1 2EN
Telephone: +44 (0)1792 455 175 • Email: info@zetaalarmsystems.com
Fire Panel Connection terminals 1 & 2
Normally open switch closing on alarm with a 470
ohm resistor tted in series with the switch
ReSet Configuration
Option 1 terminals 1 and 4
control panel
Option 2 terminals 1 and 2
control panel
Three connection options are
available
Option 1 Normally open switch
closing on alarm
Option 2 - Normally open switch
closing on alarm with a 470 0hm
resistor fitted inseries with the switch
Option 3 - Normally open switch
closing on alarm with a 680 ohm
resistor inseries with the switch
R1
R2
470
680
12
3 4
11
44
11
22
Option 1 terminals 1 & 4
Normally open switch closing on alarm
ReSet Configuration
Option 1 terminals 1 and 4
control panel
R1
R2
470
680
12
3 4
11
44
Option 2 terminals 1 & 3
Normally open switch closing on alarm with a 680
ohm resistor tted in series with the switch
control panel
control panel
control panel
R1
R2
470
680
12
3 4
11
44
11
22
11
3
3
680
-
+
470
470
680
680
Loading...