POWER SUPPLY SOURCES
S
ERIES
SSG
SSG 1,5 SSG2,5 & SSG5
Instruction Manual
July 12, 2006
SSG-0101
All the information contained in this document may be modified without prior warning.
SSG-0101 ZetaAlarm Systems
1
IMPORTANT SAFETY
INSTRUCTIONS
Electric Safety Measures
No one should work alone in potentially hazardous situations.
A high short-circuit current from conductive materials can cause serious burns.
A licensed electrician must be present for permanent installation of equipment with hardwiring.
Check that the power supply cables, plugs and sockets are in good condition.
Do not use any kind of metal component without first unplugging the equipment.
Batteries
Batteries should be recycled. Leave the battery in a suitable recycling bin or return it to
the supplier in the original packaging of the new batteries. Consult the new battery
instructions to obtain more information on this.
Do not dispose of batteries by throwing them in fire, as they could explode.
Do not open or cut batteries; they contain an electrolyte that is toxic and harmful to the skin and
eyes.
In order to prevent personal injury caused by hazardous currents, avoid wearing wristwatches
and jewelry such as rings when replacing batteries. Use tools equipped with insulated handles.
When replacing batteries, use the same number and type of batteries installed in the equipment.
Consult your distributor to obtain information on battery equipment replacement and recycling
batteries.
SSG-0101 ZetaAlarm Systems
2
Table of Contents
1
Installation of Series SSG power
supply sources
3
Checking the power supply source 3
Checks prior to installation 4
Protection against transient interferences 4
Cleaning 4
Mounting Series MPS 5
2
LED Description and
Operation
6
Features of SSG Power Supply
Sources 7
Fault Relay 8
Control Unit Connectors 9
LED Description 10
3
Specifications
11
SSG-0101 ZetaAlarm Systems
3
1. INSTALLATION OF SERIES SSG
POWER SUPPLY SOURCES
It is easy to install and start operating the Series
SSG
power supply source if you follow the procedures
described in this manual.
Read the instructions in this manual carefully to
prevent anomalies in the power supply source.
Checking the power supply source.
Before installing the Series
SSG
power supply source,
you should make some checks.
The following procedure indicates what should be
done in the event that the equipment has been
damaged after leaving the factory, or if the user has
any doubts about the quality of any ordered element.
1.
If, after unpacking the Series SSG power supply
source and making a visual inspection, you find that it
has been damaged in any way, YOU SHOULD NOT
carry on with installation, but rather you should contact
the supplier for instructions on how to return and
replace the product.
Likewise, if during installation the product does not
respond properly, immediately contact your supplier.
2.
It is important that you note the relevant details in
your complaint, the date on which you received the
product, the conditions of the package, and the name
of the contact person of the supplier firm.
.
When the product has to be returned to the supplier,
it is recommended that the original packaging be used
whenever possible.
WARNING!!!
TAKE THE NECESSARY PRECAUTIONS WHEN HANDLING EQUIPMENT SENSITIVE TO ELECTRICAL
DISCHARGES
Loading...