ZEROtherm CF User Manual

Installation Guide

Please read this installation gui de carefully before installation

Model

Specifications

Components

Installation

ZEROtherm CF700, CF800, CF900

Items

Platform

(CF700/CF800/CF900)

Models

CPU Cooler

CF700

Intel LGA775 Socket (Pentium 4, Pentium D)

L100 x W94 x H77Size(mm)

16 ~ 30 ± 10%Noise(dBA)

900 ~ 2300 ± 10%Fan Speed(rpm)

4pin 3wire with automatic control by temperature sensorConnector

Back Plate Spring Screw Thermal Grease

1) Remove the paper film from the upper surface of a back plate to use an

insulating tape.

2) Attach the back plate to the back side of a motherboard with the socket RM

(Retention Mechanism) holes li ned up.

3) Place the cooler on a CPU with all of mounting screw holes well aligned.

4) To guarantee the maximum cooler performance of the heat pipe-based cooler,

ZEROtherm, the RIGHT installation to the right DIRECTION is VERY important

as shown in picture (1). The rests (2-4) are NOT PROPERLY installed ones.

5) Fasten the spring screws fitting on the RM holes.

CF900CF800

4EA4EA(Nickel Plating)3EA(Nickel Plating)Heat Pipe

CopperAluminumAluminumHeatsink Material

562357342Weight(g)

Features

Warranty

Patent

Fan Speed (rpm)

2300

900

Internet, Music

 Warranty : 1 year from the date of purchase with a proper receipt.

 Exception : Warranty does not cover products broken by user’s fault.
 URL : http://www.apack.net
 Email : [e-mail]

 Patent for Design : 30-2005-0023049
 Registered Trademark : 40-0564565-0000

3D Game, Animation

CPU Temp. (oC)

① : (O) ② : (X) ③ : (X) ④ : (X)

Bent Heat Pipes Memory Slot

1) Copper-based heat pipe cooli ng system for maximum thermal performance.

2) MAX performance and MIN noise with optimized heat block and fin structure.

3) The upscale exterior with nickel-plated heat pipes and a transparent fan

4) Slim design to fit nearly all PC cases available in the market.

5) Model: CF700 & CF800 Extremely light weight (under 360g) with aluminum fins

6) Model: CF900 Maximized performance with copper fins

Installation Guide

Please read this installation gui de carefully before installation

Note

Although ZEROtherm’s fan speed is very low, ZEROtherm can perfectly cool the CPU. It is
possible that a few kinds of motherboards (including ASUS one) report “CPU Fan Error!” and
stop booting. This error message has nothing to do with a real system error.

When “CPU Fan Error!” alerts, set the Bios up as followings

BIOS Set-up

①①①① Booting Error – CPU Fan Error

A few kinds of motherboards (including ASUS one)
may report “CPU Fan Error”

③③③③ Boot Settings Configuration

②②②② Bios Setup – Boot tap

Press “DEL” button on your keyboard to set the
Bios up. Select “Boot” tap and “Boot Settings
Configuration”

④④④④ Wait For ‘F1’ If Error Options

Select “Wait For ‘F1’ If Error

⑤⑤⑤⑤ Wait For ‘F1’ If Error – Disabled

Now Wait For ‘F1’ If Error options are Disabled.

Press “Enter” button on you keyboard.
Switch its options into “Disabled”.

⑥⑥⑥⑥ Save configuration changes and exit

Press “F10” button on your keyboard.
Select “OK”, when the prompt ask if you want to
save configuration changes and exit now.