Zero Gravity Triumph Daytona 675 User Manual

914v install

SPORTBIKE SADDLES & WINDSCREENS

TRIUMPH DAYTONA 675/R DIY WINDSCREEN INSTALL

PLEASE READ BEFORE MOUNTING YOUR WINDSCREEN

Installation Manual for Triumph Daytona 2013 to Present Windscreen Install

Thank you for purchasing one of Zero Gravity’s windscreens which has been designed and manufactured to give years of safe and fun
riding. This instruction manual gives you an in-depth look at the installation process. To receive further assistance or parts please call Zero

®

Gravity

Helpful hints: Use metric tools, clean hands, and put the bike on a center stand. Do not pry on the screen excessively, as it w ill break

Mounting Your Zero Gravity Windscreen

Remove both of the mirror fasteners located underneath the
mirror foot. Remove both of the mirrors. Remove factory
windscreen by unscrewing the four top allen screws. Re­move four wellnuts, pulling them down from the bottom.
When removing the windscreen, pull towards the back
since it’s sandwiched in between two layers. BEFORE in­stalling ZG’s windscreen on to the bike, apply vibration damp­ing tape that is supplied in the ZG bag. To apply, adhere tape
in front of the step at the top of the marker light as shown. To install
the ZG windscreen, reverse the uninstall instruction sequence.

Note: For best results, clean surface of the substrate with alcohol, removing any sur­face contaminant's such as dirt, dust, processing oils or waxes. Apply tape once the

surface is completely dry.

Sales Department at 805-388-8803 or e-mail at [e-mail].

without much warning.

Apply tape in

front of the step

Locate the upper marker light

Pad Specs:

1/2” Square pad

x 1/8” Thick

WWW.ZEROGRAVITY-RACING.COM