Zero Gravity Suzuki 600 User Manual

171 install

Suzuki Bandit 600 (00-05) & Bandit 1200S (01-05) DIY Windscreen Install

nstallation Manual for Suzuki Bandit

I

Thank you for purchasing one of Zero Gravity’s windscreen,
which has been designed and manufactured to give years
of safe & fun riding. This instruction manual gives you an in-depth look at the install process. To receive further assistance or parts
please call Zero Gravity

®

Sales Department at 805-388-8803 or E-mail at [e-mail].

PLEASE READ BEFORE MOUNTING YOUR WINDSCREEN

Helpful hints: Use metric tools, clean hands, put the bike on a center stand. Do not pry on the screen excessively, as it will break
without much warning.

FIG2

FIG1

Fig 1. Remove both mirrors. The fasteners are under

the rubber boots. Don't drop the mirrors!

FIG3

Fig 3. Remove the 2 screws on either side of the

gauges. These fasten to the back of the charcoal V­shaped piece on the front of the fairing.

Fig 2. Remove the 2 screws at the front of the fairing.

FIG4

Fig 3. HERE IS THE TRICKY PART! You have to

carefully pry the charcoal V-shaped piece from the fair­ing. It is held in place by two tabs on each side (see
FIG5) and by a plastic pin at the bottom that pushes
into a rubber grommet. (See FIG6).

FIG5 FIG6

Fig 5. You can see the tabs on the V-shaped part

and the slots that they fit into on the silver fairing. The
tabs break very easily. If you happen to break one or
more of these, don’t worry. These don't affect the fit­ment.

TTeell:: 880000--334455--99779911 FFaaxx:: 880055--338888--88228855

Fig 6. The rubber grommet is fixed to the fairing and

you will need to pull the v-shaped piece away. If you
were standing in front of the bike looking at the screen,
you would pull it straight towards your body.

991122--AA PPaanncchhoo RRooaadd •• CCaammaarriilllloo,, CCAA 9933001122

1

171 install

Suzuki Bandit 600 (00-05) & Bandit 1200S (01-05) DIY Windscreen Install

FIG7 FIG8

Fig 7. Remove the 2 screws that fasten the rubber well-

nuts.

Please see www.zerogravity-racing.com for

further information concerning this product.

FIG9

Fig 9. You can try to do it this way, but it's hard to do

without breaking the screen.

Fig 8. Now you are ready to remove the screen. Lift

one side of the screen off of the posts on the fairing
bracket. The easiest way is by placing your palm right
in the center of the screen between the two posts and
gently push in on the screen. This relieves the tension on
the screen at the posts and will allow you to lift one side
or the other off.

FIG10

Fig 10. View of the bike with no screen.

FIG11 FIG12

Fig 11. A closer view of the plastic tabs and the slots.

(For reference.)

TTeell:: 880000--334455--99779911 FFaaxx:: 880055--338888--88228855

2

991122--AA PPaanncchhoo RRooaadd •• CCaammaarriilllloo,, CCAA 9933001122

Fig 12. A closer view of the plastic tabs and the slots.

(For reference.)