Zero Gravity S1000RR User Manual
810 install
SPORTBIKE SADDLES & WINDSCREENS
Rev.a
BBMMWW SS11000000RRRR DDIIYY WWiinnddssccrreeeenn IInnssttaallll
Installation Instructions for BMW S1000RR
Thank you for purchasing one of Zero Gravity’s windscreens which has been designed and manufactured to give
years of safe and fun riding. This instruction manual gives you an in-depth look at the installation process. To receive
urther assistance or parts please e-mail techinfo@zerogravity-racing.com.
f
PLEASE READ BEFORE MOUNTING YOUR WINDSCREEN
Helpful hints: Use metric tools, clean hands, pu t the bike on a stand. Do not pry on the screen excessively, as it can break
without much warning.
FIG1
Fig 1. Remove both mirrors. The fasteners are behind
the fairing. Be careful not to drop the mirrors!
Push
Down
Pivot
Pivot
Lift Up
FIG3
Fig 3. HERE IS THE TRICKY PART! You have to
carefully recline the windscreen down from the fairing.
It will be pivoting in two places one on each side.
(See FIG3A).
FIG2
Fig 2. Remove all 8 fastener screws.
Pivoting
point
Pivoting
FIG3A
Fig 3A. This photo shows he pivoting points on either
side of the screen.
point
Be careful not to over pivot!
WWW.ZEROGRAVITY-RACING.COM
1
810 install
SPORTBIKE SADDLES & WINDSCREENS
BBMMWW SS11000000RRRR DDIIYY WWiinnddssccrreeeenn IInnssttaallll
Rev.a
FIG4
Fig 4.
the windscreen back to remove.
FIG6
Fig 6. Install screen from the back side. Reclined in
position, the front of the windscreen should be on the
outer side of the fairing with the wellnut tab tucked
inside fairing.
Now you are ready to remove the screen. Slide
Tucked inside
fairing
Keep out!
outside fairing
FIG5
Fig 5. Before installing Zero Gravity Windscreen.
Install Rubber wellnuts (Remove them from your stock
screen).
FIG7
Fig 7. Starting from the top of the windscreen and
working down, hand tighten all fasteners then reinstall
mirrors.
Please see www.zerogravity-racing.com for
further information concerning this product.
2
WWW.ZEROGRAVITY-RACING.COM
FIG8
Fig 8. Windscreen and Mirrors installed.
Loading...