![](/html/65/65f9/65f9e998722f156a55d553e22dd905997b00b5c71b76d6a7e6e589aa9b434e53/bg1.png)
1 2 3
SMARTPHONE APP
PAIRING Bluetooth
Thank you for purchasing your DistancePro
TM
GPS Glove! This Quick Start Guide was
compiled to guide you through the basic
features of the DistancePro and smartphone
app. A full user manual is available for download
from the following URL:
http://www.zerofriction.com/distprousermanual
Please take a moment to conrm that the
package contains the following items:
• 1- DistancePro Device
• 2- Compression Fit Technology
2 Motion-Fit System
version purchased)
TM
Gloves (depending upon
TM
Gloves or
• 1- CR2025 Coin Cell Battery (pre-installed in
DistancePro; *see instructions for replacing battery
below)
• 1- Quick Start Guide (Includes Warranty Information)
To replace the battery, use a coin to turn
the battery compartment door (IMG 1.1)
counterclockwise until the arrows align, then
remove it. Take the old battery out and insert the
new battery, making sure the positive side (+)
is facing out (img 1.2). Use ONLY the following
coin cell batteries: CR2025, 2025, ECR2025,
DL2025, BR2025, 280-205, 5003LC, or SB-
T14. To reinstall the battery compartment door,
align the arrow on the door with the arrow
on the case, then use a coin to turn the door
clockwise and lock it in place.
Battery
Compartment
Door
The DistancePro provides distances by utilizing
the GPS hardware on your smartphone and
receiving the data via Bluetooth® wireless
technology. Prior to golng, install the Zero
Friction
TM
DistancePro app to your smartphone
and make sure Bluetooth is enabled in your
smartphone’s settings. Note: Upon rst
activation of the app, you will see a pop-up
message requesting permission to use your
location. You will need to allow this in order to
use the DistancePro app.
iPhone (iPhone 4s or newer running iOS 9.0 or later)
Samsung Galaxy Phones (S4 or newer running Android 4.3 or later)
REGISTRATION
After installing the smartphone app, you will
need to complete the registration (img 2.1) to
begin using the app. This only takes a minute
or two to complete, and ensures that you have
access to support and other useful resources.
Zero Friction takes your privacy seriously and
never sells or discloses your information to third
parties. Please review
the Privacy Policy from
the link at the bottom of
the app (img 2.1) for full
disclosure of how we use
your information.
In order for the DistancePro to provide distances,
it must rst be paired to your smartphone via
Bluetooth. You only need to complete the pairing
process once; your phone and DistancePro will
pair automatically for subsequent uses. Make
sure yours is the only active DistancePro within
30 meters of your smartphone during setup.
To pair your DistancePro to your phone:
1. Power the DistancePro ON by pressing
either button. The DistancePro will prompt you
to enable Bluetooth on your smartphone (img
3.1), and will search for up to 30 minutes (img 3.2).
img 3.1 img 3.2
2. Select the “Settings” Icon (img 3.3) from the
smartphone app’s homepage.
img 3.3
3. From the Settings screen, select the “Pair
Device” button (img 3.4). The smartphone and
DistancePro will then search for each other.
Once they are paired, the app will display the
unique ID for your DistancePro (img 3.5).
Note: Bluetooth ID numbers display in different formats on iPhone and
Android devices. Format shown below is for iPhone.
DEVICE ID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
img 1.1 img 1.2
Lit #: ZFDP-QSG-REV12 October-2016
img 2.1
img 2.2
*Note: Device Product ID
is located on the back of
the DistancePro (img 2.2).
img 3.4 img 3.5
You are now ready to hit the links! See pages
4 -5 for details regarding Golf Features.
![](/html/65/65f9/65f9e998722f156a55d553e22dd905997b00b5c71b76d6a7e6e589aa9b434e53/bg2.png)
GOLF FEATURES
4 5 6
GOLF FEATURES...CONTINUED
WARRANTY
Once the DistancePro and the smartphone have
been paired, activate Golf Mode by selecting
the “Play Golf” button (img 4.1), then select the
appropriate course from the list of results (img 4.2).
img 4.1 img 4.2
The smartphone app main screen (img 4.3) provides
front, center, and back of the green distances and
allows you to track shot distance. The movable
target allows you to view distances to any point on
a hole for maximum shot-planning eectiveness.
Center of the Green Distance
Hole #
Front of the
Green Distance
Manual Hole
Advance
(Previous Hole)
Distance between
Target & Center of
Green
Par Information
Back of the
Green Distance
Manual Hole
Advance
(Next Hole)
Movable Target/Layup
The DistancePro provides front, center, and back
of the green distances at a glance, along with
hole number and par information (img 5.1).
These distances are based upon your smartphone’s
location.
Hole #
Front of the
Green Distance
Manual Hole
Advance
(Previous Hole)
Center of the Green Distance
img 5.1
Par Information
Back of the
Green Distance
Manual Hole
Advance
(Next Hole)
To exit golf mode, simply exit and close the app
on your smartphone. When this is done, the
DistancePro will display an onscreen prompt (img
5.2). Press the left button to select “Power O.” If
no selection is made after 1 hour, the DistancePro
will automatically power o.
Power OFF
img 5.2
Note: By default, the app and the DistancePro will
display distances in yards. This can be changed
on the Settings page within the app by simply
tapping the “Unit of Measurement” button (img 5.3).
The Zero Friction DistancePro is backed by a one year limited
warranty. For questions related to warranty, please contact us :
Zero Friction LLC
1 Trans Am Plaza Drive, Suite 540
Oakbrook Terrace, IL 60181
1-877-316-7492
distancepro@zerofriction.com
FCC STATEMENT
This device complies with Part 15 of the FCC interference limits for
Class B digital devices FOR HOME OR OFFICE USE. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation, and are more stringent than “outdoor”
requirements.
Operation of this device is subject to the following conditions; (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for
help.
The device does not contain any user-serviceable parts. Repairs should
only be made by an Authorized Zero Friction repair center. Unauthorized
repairs or modications could result in permanent damage to the
equipment, and will void your warranty and your authority to operate this
device under Part 15 regulations.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without RF
striction.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Distance
between User
& Target
Note: Course
Preview is
available for
courses outside
your location.
See the Full User
Manual for details.
Enable Low
Energy Mode
Zoom-in on
Green
Shot Distance
Measurement
img 4.3
img 5.3
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries. App Store is a service mark of Apple Inc.
Android and Google Play are trademarks of Google Inc.
Samsung and Galaxy S are trademarks of Samsung Electronics Co. Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Zero Friction is under license.
Other trademarks and trade names are those of their respective owners.
©2016 Zero Friction LLC. All rights reserved.